Deleted member 651465
Deleted member 651465
No. Nothing happens before the 72hrs (or at least rarely), just have to wait it out
adslctl: ADSL driver and PHY status
Status: ShowtimeRetrain Reason: 8000
Channel: FAST, Upstream rate = 945 Kbps, Downstream rate = 16381 Kbps
Link Power State: L0
Mode: ADSL2+
Channel: Fast
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 7.9 15.7
Attn(dB): 12.0 6.7
Pwr(dBm): 18.7 12.3
Max(Kbps): 25312 945
Rate (Kbps): 16381 945
Well im hoping it goes up. Its quick how it is, but a speed bump wouldnt be complained about.Maybe. You have a lot of scope to change your upstream, so keep an eye on that.
I can't see downstream moving from there![]()
adslctl: ADSL driver and PHY status
Status: ShowtimeRetrain Reason: 8000
Channel: FAST, Upstream rate = 1110 Kbps, Downstream rate = 16381 Kbps
Link Power State: L0
Mode: ADSL2+
Channel: Fast
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 7.8 9.3
Attn(dB): 12.0 6.5
Pwr(dBm): 18.1 12.3
Max(Kbps): 25352 1157
Rate (Kbps): 16381 1110
adslctl: ADSL driver and PHY status
Status: ShowtimeRetrain Reason: 8000
Channel: FAST, Upstream rate = 1142 Kbps, Downstream rate = 19006 Kbps
Link Power State: L0
Mode: ADSL2+
Channel: Fast
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 7.4 8.8
Attn(dB): 12.0 6.5
Pwr(dBm): 18.1 12.3
Max(Kbps): 25608 1135
Rate (Kbps): 19006 1142
Brand new building.Dont worry about the max rate your modem says, it is basing it usually using all your spare SNRM.
You need to go by your current SNRM. Skys system is set to 7db, which yours sitting at. I would look at your internal wiring, you should hit the full service on your line so something else is causing it to sync a bit low or you could just have poor copper but im going with bad internal wiring.
After your testing period, try connecting in the test socket on the bt faceplate.