Another line stats thread...

No. Nothing happens before the 72hrs (or at least rarely), just have to wait it out
 
Its improved. :D
Code:
adslctl: ADSL driver and PHY status
Status: ShowtimeRetrain Reason:	8000
Channel: FAST, Upstream rate = 945 Kbps, Downstream rate = 16381 Kbps
Link Power State: L0
Mode:			ADSL2+
Channel:		Fast
Trellis:		U:ON /D:ON
Line Status:		No Defect
Training Status:	Showtime
		Down		Up
SNR (dB):	7.9		15.7
Attn(dB):	12.0		6.7
Pwr(dBm):	18.7		12.3
Max(Kbps):	25312		945
Rate (Kbps):	16381		945
1221155624.png


Will it go up further as its training does anyone think?
 
Maybe. You have a lot of scope to change your upstream, so keep an eye on that.

I can't see downstream moving from there :)
 
Maybe. You have a lot of scope to change your upstream, so keep an eye on that.

I can't see downstream moving from there :)
Well im hoping it goes up. Its quick how it is, but a speed bump wouldnt be complained about. :-p
Its already 3-4x faster than at my old place. lol.

Whats strange, is that at 4meg, it said the 'max' was 15meg, and now its at 16, it now says the max is 25meg...hmm.
 
Still at 16meg, but this morning ive just noticed the upstream jump to 1.1meg from 0.9meg:
Code:
adslctl: ADSL driver and PHY status
Status: ShowtimeRetrain Reason:	8000
Channel: FAST, Upstream rate = 1110 Kbps, Downstream rate = 16381 Kbps
Link Power State: L0
Mode:			ADSL2+
Channel:		Fast
Trellis:		U:ON /D:ON
Line Status:		No Defect
Training Status:	Showtime
		Down		Up
SNR (dB):	7.8		9.3
Attn(dB):	12.0		6.5
Pwr(dBm):	18.1		12.3
Max(Kbps):	25352		1157
Rate (Kbps):	16381		1110
 
Another increase this morning :-D
Code:
adslctl: ADSL driver and PHY status
Status: ShowtimeRetrain Reason:	8000
Channel: FAST, Upstream rate = 1142 Kbps, Downstream rate = 19006 Kbps
Link Power State: L0
Mode:			ADSL2+
Channel:		Fast
Trellis:		U:ON /D:ON
Line Status:		No Defect
Training Status:	Showtime
		Down		Up
SNR (dB):	7.4		8.8
Attn(dB):	12.0		6.5
Pwr(dBm):	18.1		12.3
Max(Kbps):	25608		1135
Rate (Kbps):	19006		1142
Thats pretty much the 20Meg that sky offers.
Wonder if it'll allow a sync above that if the line supports it, which it appears to do stat wise?
 
Dont worry about the max rate your modem says, it is basing it usually using all your spare SNRM.

You need to go by your current SNRM. Skys system is set to 7db, which yours sitting at. I would look at your internal wiring, you should hit the full service on your line so something else is causing it to sync a bit low or you could just have poor copper but im going with bad internal wiring.

After your testing period, try connecting in the test socket on the bt faceplate.
 
Dont worry about the max rate your modem says, it is basing it usually using all your spare SNRM.

You need to go by your current SNRM. Skys system is set to 7db, which yours sitting at. I would look at your internal wiring, you should hit the full service on your line so something else is causing it to sync a bit low or you could just have poor copper but im going with bad internal wiring.

After your testing period, try connecting in the test socket on the bt faceplate.
Brand new building.
Brand new lines to a brand new cab.
Brand new wires to the main switch board in the building.
Plugged directly into main socket, only thing connected is the router.
If the sky standard is 7dB, wouldn't that 0.4 account for the 'missing' 1Meg?
I'll see what its like at the end of the training period, either way, VERY happy with 19meg. :p
 
no, wont get 1mbit from 0.4db snrm.

Time of day etc can all change snrm, try syncing first thing in the morning, this produces the best results and with your line it will stay stable throughout the night.

Do you have extentions at all? if you do, even if they are brand new, builders dont use th ebest quality cable so worth a test socket try :)
 
Its gone up again. Only a little this time though.
Down has gone from 19006 to 19989, and up from 1142 to 1157.
So as good as makes no difference, 20meg/1.1meg.

I'm assuming if its only gone up by a tiny amount I'm now looking at the limits of what my line is capable of?
 
Back
Top Bottom