Bf6 optimisation questions

[delpy8]

Good advice, only thing I'd add is that 250dpi is pretty low, ideally you'd aim for 400 or 800 as minimum (I think for BF6 I'm 800dpi / 12 sens / 98fov @ 2560x1440p) Other windows setting to check is Enhanced Pointer Precision, but IIRC having Raw Mouse Input active in game ignores this setting

I assume my settings might be higher with a 5120x2160 setup, will need to try and see what settings are best

Good advice, only thing I'd add is that 250dpi is pretty low, ideally you'd aim for 400 or 800 as minimum (I think for BF6 I'm 800dpi / 12 sens / 98fov @ 2560x1440p) Other windows setting to check is Enhanced Pointer Precision, but IIRC having Raw Mouse Input active in game ignores this setting

 

[delpy8]

@ 3440x1440

All on the High Pre-set, which for some reason sets to Custom.
Think the Mesh setting is set to Ultra
Capped frame rate @ [165]

Motion blur reduced down to the min
Resolution Scaling [Off]
DLSS [On]
FG [On] (2x)

Runs between 135 - 165, typically the higher end and feels very smooth.

Whats the recommended settings for a 5090 with an 9950x3d using a 5k2k monitor, I was told by a mate to use the txt file to disable certain things via a user.cfg file, To be honest the game runs great apart from my DPI lol

 

[markyb]

How do you find the input latency due to running frame gen?

Latency sits between 1.5 - 2.0 which is actually better than it being off if that makes sense. The stats from BF6.
It feels really nice and smooth.

 

[seanuk]

Latency sits between 1.5 - 2.0 which is actually better than it being off if that makes sense. The stats from BF6.
It feels really nice and smooth.

Is that your actual frame time?

 

[markyb]

Is that your actual frame time?

According to the "simple" setting on stats within BF6. I feels very smooth, I tend to notice when it dips below 125fps. Alienware OLED Monitor @ 165hz.