[BitFenix] Support and Discussion Thread!

pgi947 · 18 Feb 2012 at 19:57

xbournex said:
Hrm.. that Phobya looks interesting. If the 180mm fans actually have, 180mm x 180mm mounts on the holes, Then I would say it would fit (2 on each side).

I totally didn't think of doing this! You may have just saved me a few £££

Already have one 230mm spectre pro (incredible airflow!) so another 3 shouldn't hurt the bank balance too much

Thanks xbournex!

Edit: the fan in the picture is the CM Megaflow 200mm, afaik has the standard 54mm spacing the 200/230mm SP's have.

xbournex · 18 Feb 2012 at 20:01

I told ya, I'm comin in to kick Kul1 in the...

Jayster · 18 Feb 2012 at 20:04

kmetek said:
what link on youtube?

Computex BitFenix

this?

who is the guy?

Thats Kul1 I believe.

That fan controller looks very good indeed, though I hope it is not too expensive and can supply a decent amount of amps per channel.

kmetek · 18 Feb 2012 at 20:06

Do you guys like that fan controller and to control over internet? DROOOL.

xbournex · 18 Feb 2012 at 20:13

Jayster said:
Thats Kul1 I believe.

That fan controller looks very good indeed, though I hope it is not too expensive and can supply a decent amount of amps per channel.

He's David, Product Manager.
He does all the product videos.

kmetek · 18 Feb 2012 at 21:09

My recent case is ANTEC P182...Which Bitfenix is considered to be similar? I like NZXT 810 functionallity but feels too plastic. Like integrated card reader and movable inside fans etc + that fan regulator for 7 fans?

Is Shinobi big enough compared to P182 or wait for XL?

Case must be like-able, quiet but there's dilema which one.

King Damager · 18 Feb 2012 at 22:43

NZXT 810 direct comparison would be Shinobi XL I'd imagine. What are your requirements. Unless you're going to watercool, something like the standard Shinobi or the BitFenix Raider will be more than adequate.

kd

xbournex · 19 Feb 2012 at 04:49

*Cough*
Did everyone go quiet after I said I wasn't in charge of contests?

I got a 2 can dine for 8.99 at McDonalds in Canada

I'm only bugging you guys. Humans need sleep... I wonder why I haven't done so regularly, or lately

Hyburnate · 19 Feb 2012 at 06:05

xbournex said:
*Cough*
Did everyone go quiet after I said I wasn't in charge of contests?

I got a 2 can dine for 8.99 at McDonalds in Canada
I'm only bugging you guys. Humans need sleep... I wonder why I haven't done so regularly, or lately

Whats sleep?

.

Fly me over to Canada and I'll join ya. But first I want to see Niagara Falls.

kmetek · 19 Feb 2012 at 07:39

KD: not gonna watercool...got that gelid tranquillo 2 which i'll be using for new system, just waiting for the right case....want something big as P182 or a little more for extra space....

Shinobi is very great price 50Ł or Raider, tough choices.

Nexus18 · 19 Feb 2012 at 08:05

Damn!

That fan controller looks awesome in terms of features and aesthetics! (usually I am not keen on those sort of things either) The whole controlling it from your Android is vey cool as well.

Love these very cool neat ideas that you guys come up with.

Also regarding the p182, check out my review of the raider, I have done quite a few comparisons against the p182 (mainly noise, build quality), which you may find useful

However, if you want more space, the shinobi and the raider is a bit of a downgrade in that area. The XL is the one that you would want.

EDIT:

However, the raider case is big enough. If you want to put long gpus in like a 6970 etc. The side plate for the top hard drive cage would have to be removed, which will leave you with 3X3.5 hard drive slots, however, if sll 3 slots are occupied, there is very little space between the hard drives, which is not good for temps and airflow.

Hyburnate · 19 Feb 2012 at 08:11

Oh yeah I forgot to mention that, its got a sort of subtle design that I like. However will you release an app for BB?

kmetek · 19 Feb 2012 at 08:25

As I thought so, thanks... 810 or XL then.

Nexus18 · 19 Feb 2012 at 08:40

I personally prefer the XL overall.

kmetek · 19 Feb 2012 at 10:59

Agree....

King Damager · 19 Feb 2012 at 11:39

xbournex said:
*Cough*
Did everyone go quiet after I said I wasn't in charge of contests?

I got a 2 can dine for 8.99 at McDonalds in Canada
I'm only bugging you guys. Humans need sleep... I wonder why I haven't done so regularly, or lately

Nope, but it was 4am

But yeah, if the choice is between the XL or the 810, I'd pick the XL. It generally seems like a nicer case. Not that I've seen reviews of it, but the reviews of the 810 seemed to suggest it wasn't as good as I'd hoped.

I'm still far too excited about the XL to be honest xD

kd

Jayster · 19 Feb 2012 at 18:37

xbournex said:
He's David, Product Manager.
He does all the product videos.

Who runs the fb page?

FallshirmjAEger · 19 Feb 2012 at 19:17

Who else is using the spectre pro series of fans? Just installed two & now my system is quiet for the first time since....ever

On a side note, is there anywhere I can purchase the fan mounts seperately from the fans themselves?

John1808 · 19 Feb 2012 at 19:49

Tell you what I am looking for is cables for modular PSU's. Some PSU's have quite stiff modular cables. Surely Bit Fenix can make them braided for say ocz, corsair PSU's etc.

John

xbournex · 19 Feb 2012 at 21:23

Jayster said:
Who runs the fb page?

A couple of people, including me.

John1808 said:
Tell you what I am looking for is cables for modular PSU's. Some PSU's have quite stiff modular cables. Surely Bit Fenix can make them braided for say ocz, corsair PSU's etc.

John

We're running a pilot project with OC3D right now. One thing for certain is that the cables WON'T be selling separately. I just can't see 400 SKU's being released, and suppliers having to purchase in bulk. More likely in sets.