Can I polish this out?

Not sure if its the picture, but the middle part looks potentially a deep part of the scratch.

I had some on mine which actually don't look as bad as that, and even G6 couldn't cut the scratch out.
 
Not sure if its the picture, but the middle part looks potentially a deep part of the scratch.

I had some on mine which actually don't look as bad as that, and even G6 couldn't cut the scratch out.

Yeah as far as I can tell there's no scratch, I've looked at it from various angles and the bumper seems to be the same shape it always was just a different colour, running my hand over it its flat enough that it's either not scratched or the scratch has become miraculously perfectly filled with the other guys paint.
 
If that is black paint which has transferred then you might get most of it out. If not then it's probably an £80 touch up.
 
Last edited:
Yeah as far as I can tell there's no scratch, I've looked at it from various angles and the bumper seems to be the same shape it always was just a different colour, running my hand over it its flat enough that it's either not scratched or the scratch has become miraculously perfectly filled with the other guys paint.

You'd be better off trying to rub your fingernail over the scratch very lightly, you can feel if there is a groove in the paintwork then. If it feels all smooth, then i'd say you've got off lucky and some fairly light cutting agent might do the trick.
 
Yeah as far as I can tell there's no scratch, I've looked at it from various angles and the bumper seems to be the same shape it always was just a different colour, running my hand over it its flat enough that it's either not scratched or the scratch has become miraculously perfectly filled with the other guys paint.

How have you not done this yet?

Pretty much everywhere including supermarkets sell T-cut, and you just need a couple of rags lol.
 
Because I assumed that if you got tcut wrong you could make the problem worse?

it'll take you a decent amount of effort to go through clear coat, can't see how you'd make it worse tbh..

wash the area so there's no dirt first and then t-cut it..

I went one step further and rubbing alcohol on the paint transfer and it was 80% gone.
 
Hmm I might give it a go then, like I say it's a pretty well worthless car now, I just need it to look reasonable at a glance and keep going
 
Just wash the area first, put rag over bottle, turn bottle, work the product in the problem area applying decent presure, keep working it until it looks like its off. then wait for it to dry and buff it off with other rag

Keep away from any black trim

You might aswell do the whole car if it comes out well :cool:
 
You won't damage anything by hand. It takes serious effort, or more lack of attention to burn through even with a rotary.
 
Why don't you try and see if it just plastic that has bonded on from the other use a decent cutting polish and try get rid. if your struggling its time to take it to a bodyshop. don't listen to these numptys that say "get a touch up kit" etc as it will never be the same and just look a mess. get it done properly
 
I received some damage like that on a hire car once. I was nowhere near any car shops, and though it wasn't my fault I knew they would hammer me for the excess as there was no 3rd party to own up to causing the damage.

I bought a bottle of Cif and a dishcloth and got it 90% repaired in under 10 minutes. They never mentioned a thing.

Another Cif user/abuser here :) Use it once a year to get rid of any black marks/lines from the wifes door mirror housings. Cif can be pretty abrasive so make sure you use a small amount and make sure both the cloth and the area being Cif-ed are wet :D
 
It's hard to be certain from a picture, but it does look like it's just transfer from the other car. You (and Chips Away) seem to think so too.

I've been painting cars for over 20 years but I'd certainly have a go at "polishing" it out first. Anything slightly abrasive should do it, from a decent all in one polish to T cut, polishing compound, even a decent toothpaste! I'd stick with something designed for the job though, just to be safe. A bottle of something and a few cloths will be much cheaper than that quote you've had, and elbow grease costs nothing :)
 
Back
Top Bottom