Computer not detecting wireless network.

You don't need to use print screen. Right click, mark, select the bit you want, hit enter, and paste it.
Though a yes/no answer would suffice :p
 
Windows IP Configuration

Host Name . . . . . . . . . . . . : Brains_L10-300
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast Eth
ernet NIC
Physical Address. . . . . . . . . : 00-C0-9F-C4-90-51
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1

Ethernet adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : INPROCOMM IPN2220 Wireless LAN Card
Physical Address. . . . . . . . . : 00-14-A4-20-29-71


Note: I can no longer access router settings or internet, via ethernet.
 
ok

start run cmd ping 192.168.1.1

post results

then do this

on your lan network card add this to the dns settings

80.255.253.50
80.255.253.58.


see if you can access the net after you changed the dns settings on your pc
 
Last edited:
"your post 45

Ok, the latest...

Good news, now when i plug in my router via ethernet it connects 100Mbps!

Bad news, i have once again lost my internet connection."
Note: I can no longer access router settings or internet, via ethernet.

Note: I can no longer access router settings or internet, via ethernet.

or you mean the network card connects but you cant access the router or internet?
ping 192.168.1.1

what happened between that and your last post?
 
Last edited:
From before: Just that, i was connected to the router, yet i could not get into the router settings, or access the internet.

Now: Ping failed before and after.
 
on that router you have 4 ports have you tried connected the network cable and testing each port?

plus does your router page look like this



?


another question your isp did they give you a password and user name. just want to make sure your not on a bridge connection.
and have you turned off windows firewall?

 
Yeah i have username and password, they have to be entered for the usb connection to work.

Similar fields, but that is not my interface, mine is that shown in post 52. The lilac one.
 
ok iam gonna pull up that firmware, btw do you have a static ip?
iam gonna do screen shots and you copy them ok.
 
Last edited:
Same from all four lan ports.

'pull up that fireware'?

Copy settings from the screenshots?

Don't know about the static IP?

Should i do a system restore to reset everything? Could that help?
 
Last edited:
ok log into your router via the usb
then at the main page start isp setting it should look like this
apart from the user name and password.

 
ok next thing

press setup then lan configuration looks like this


press the purple button that says configure then you should have a page like this




and this
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom