I have just received a refurb h100 from OCUK, however I appear to be having some issues, At present both 120mm fans are connected into the h100 pump unit, and the single wire from the pump unit is connected to the CPU fan header on the main board, on first powering the PC on fans run at full speed, about 5 seconds later, the speed is reduced to a around 1300rpm (which is fine and not too loud). The 3 LEDs light up on the pump, but no matter how many times I press the button in the middle, the LEDs change but the fan speeds remain the same....CPU Idle stays at around 30 degrees
Have I missed something here, as they are connected to the pump I expected them to change speeds??
thanks in advance
Have I missed something here, as they are connected to the pump I expected them to change speeds??
thanks in advance