Detailing Stages

[nlel1975]

My charger has finally been dispatched so I should have everything this time next week. Probably going to fill a 10L watering can but not to the brim and pour that into the Greenworks unit.

If I need to make two trips for water then so be it. The good thing about using a watering can is that it should be fairly easy to pour into the Greenworks unit whereas using buckets it wouldn’t be.

 

[nlel1975]

I have just ordered the Amazon snow foam lance bottle

at least it holds more than the soap dispenser that comes with the Worx (400ml Vs 1,000ml)

and im going to order a 1.1mm orifice to put straight in

Good move, probably not worth going to the expense of the MJJC Foam Cannon Pro if using with a worx.

 

[nlel1975]

Received my charger today and now have everything I need...



Battery on charge...



Looking forward to trying it out.

 

[nlel1975]

Had a quick play, shot it in the bath and you can definitely feel the 70 bar compared to what I’m used to with the Worx. Even creates a sort of wind around it because of the pressure.

@Mekrel I know I’m probably being thick here but where do you connect the MJJC foam cannon to the Greenworks?

 

[nlel1975]

I ordered the tool only but they’ve sent me a 40v 2.0 Ah battery and standard charger in the box with it, worth £ 75. If only I’d opened the box before I could have saved buying a charger. Never mind nice to have a spare battery anyway.

 

[nlel1975]

Here's a video showing the power of the worx vs the greenworks...

Worx first...

https://youtu.be/PCRZ-2I9PYQ

Greenworks...

https://youtu.be/bS8OTFVqjdQ

 

[nlel1975]

it must go on the end somewhere ?
are you sure the end of the gun you cant screw it off anywhere ?

I think I've got it sussed...

 

[nlel1975]

Here's a video showing how easy it is to connect and disconnect the MJJC foam lance to the greenworks...

https://youtu.be/PUN8Vwol-O0

Warning contains video footage of my old and ugly mug!

 

[nlel1975]

Just tried out the Greenworks GDC40 with the MJJC Foam Cannon Pro V2.0 for the first time...



Got some very nice foam, very pleased with it well worth the money.

 

[nlel1975]

Do you charge the owner of the car next to yours for the foam treatment too?

Lol I noticed that, I couldn’t be bothered to reverse out of the space and apply it away from other cars. I just wanted to test it out. I’ll do a proper job in the early hours of the morning, out of the way of other cars.

 

[nlel1975]

Just had a quick look it’s all evaporated now!

 

[nlel1975]

Looks like a good result.

Yeah first thing I did when I received the MJJC Foam Cannon Pro V2.0 was replace the 1.25mm orifice with the supplied 1.1mm orifice. You need to do that if your pressure washer is below 110 bar. My Greenworks GDC40 is 70 bar.

 

[nlel1975]

i bet you get some funny looks doing in a car park ! ?

There was no one around today, normally get some comments if someone sees me. Planning on doing it in the early hours of the morning in future, even less chance of someone seeing me.

 

[nlel1975]

Glad you're pleased with it! Did the rapid charger come with the unit, or is that the one you bought separately?

I bought the rapid charger separately.

 

[nlel1975]

Hey man, I recently purchased the Greenworks GDC40 and I'm trying to fit a short trigger gun on the end of it.
I saw your post on PistonHeads also that it uses the Kew/Alto/Nilfisk connector, I've tried two now and I can't get the short trigger lance to fit on the end of the hose.

Hi, I got mine from Mekrel and as you can see from my postings above it fits perfectly. To get one like mine go here...

https://www.in2detailing.co.uk/prod...ro-replacement-adaptor?variant=39503136391247

It says "If you are purchasing (or have purchased) a short trigger gun, you will need the 1/4 Quick Release adaptor." You can select one from the above link, don't know if it will work for you.

I'm using the MJJC Snow Foam Lance Cannon Pro V2