dont understand output...help

Trisdov · 1 Jan 2015 at 11:48

Hi guys,

firstly happy new year, hope you are all well and not to hung over :eek:

i have x2 agility 3 60Gb drives in a raid 0 for my C:, i have these since the older days of SSD'd. i am planning on upgrading soon however for now thats what i have.

i have run CrystalDisk and im getting the output below..i'll be honest i have no feking idea whats up....

can anyone offer advice?

ED209 · 1 Jan 2015 at 11:55

Happy new year!

are you having any issues with windows itself or using the PC in general?

Trisdov · 1 Jan 2015 at 11:58

not really.....was just playing around to be honest with some diag tools.

the only thing i thought it could have been was it was 29% fragmented but i thought that didnt matter really with SSD'd?

i have since defragged it anyway. not really having speed issues....not that i have anything to compare it to though

bledd · 1 Jan 2015 at 12:05

Is it because it can't read the temperature as it's a RAID device?

ED209 · 1 Jan 2015 at 12:08

you don't need to run disk defrag on SSD's and from my understanding it shouldn't be ran on SSD's as its a HHD tool.

it movies files for quicker access for HDDs but being a SSD you don't need it. are both the drives in a raid setup or just 2 x standard SSD's?

here are screen shots if my 2 SSD's, not in raid

and

Trisdov · 1 Jan 2015 at 12:15

bledd. said:
Is it because it can't read the temperature as it's a RAID device?

im thinking this is what the issue is tbh, these are x2 OCZ Agility 3 60g versions running as one.

im using speccy and it cant even read the SMART function as its disabled in a raid i believe, maybe im just panicking

ED209 · 1 Jan 2015 at 12:39

if its setup using raid then im guessing this is why it cannot read the drives properly as windows will see them as 1 drive.

when I raided my two ssd's the magician software cant even find the drives as it appears as a intel drive.

unless your having issues I wouldn't worry too much about it just to be on the safe side don't keep anything you can restore or afford to loose

APM · 1 Jan 2015 at 14:29

I have a red error message if I use the WD diagnostics on my MX100,can't remember what one it fails on but the SSD never passes SMART tests although it's been working fine since it was fitted must be 2 months ago now.