dust filters on a antec 900

Sasso

Sasso

Sasso

Soldato
Joined
7 Dec 2007
Posts
3,939
Location
Swansea, Wales
got fed up of hoovering inside my case every 5 mins so decided to buy to dust filters and attach them to my 900.... not as straight forward as i had thought :p but here some pics i took...

this is the filter
dsc01120hx7.jpg


here are the parts.. now i tried to fit them all but it didnt work :( but if i used the thin bit and the filtert it almost fitted
dsc01121ip6.jpg


but they didnt quite fit behind the mesh at the front so a little modding was required ;)
dsc01122qj8.jpg
 
after a little bit of pliers work it looked a bit like this, aint too clear but they are bent to about 30 degrees.. i did this to allow a small bit of extra room between the fan and these bit so the grille woudl fit :D
dsc01123jv7.jpg


and here's the finished case :D did it to both front fans and also put on in the side window vent to be sure :D hehe , barely notice any incerease in temp, front fans are on med now to keep the air flow up but its all good :D
dsc01124om4.jpg
 
Cool man. That's different to how I did it. I simply screwed the plastic backing 'plate' to the case, rested the foam filter ontop, and then screwed the mesh drive covers in.

EDIT: Unless yours is the same? and I'm missing something.
 
Isnt that harder because you have to take out the hdd cages to get to clean the filters?
Its much easier just blowing out the fans and inside the case, then cleaning the filters?
 
Just buy a wetndry hoover for £30 with a blower on it,, I blow my fans and case out with 1 every 2months or so, and it takes like 5mins todo. I couldnt be bothered taking all the hdd cages out to clean the filters.

Edit: Or just put black foam over the front of your case where the fans are.. Sorted..lol
 
Last edited:
lol :P well ive only just done it but my thinking is if i just put the hover onto the front of the case it will suck the dust from the filter? :D
 
speedy2004 said:
Edit: Or just put black foam over the front of your case where the fans are.. Sorted..lol
Click to expand...

Im thinking about trying that idea of mine, buying some black foam and cut it so the the 2 plastic front panels hold the foam in place. I guess I whould need the foam to be nice and thin so the air can pass through it easily?
 
lol yea the foam needs to be pretty thin, like the stuff that came with the filters is only about 2-3mm thick max
 
You must log in or register to reply here.
Back
Top Bottom