Easy's C2D 6400 Clock

[easyrider]

gotcha... I forgot about the extra cache in the 6600. I'm gonna wait till the price cuts before I upgrade. I'd love one that clocks as well as easyriders, as I will be hopefully running on water.

Go for the 6420 then

8x multi 4mb cache

 

[easyrider]

What memory are you using atm? (timings and stuff pls).

G Skill HZ 6400 running 950MHZ 1:1 at 5,5,5,15

 

[easyrider]

what vDimm you using for that? and is that your old kit from nearly a year ago?

Can you get 4-4-4-12 or 3-3-3-8 out of em? I say that because the Crucial I have is doing DDR2-800 4-4-4-12 at 1.8vDimm and maybe when I get time I can try for 3-3-3-8? (with some more volts).

You always used to grumble about slack timings?

2.25v


They are good for 900 mhz @ 4,4,4,12 timings but the difference is so small its better to have them running faster @ 5,5,5,15.

especially with the higher clocks speeds.

 

[easyrider]

I still didn't use that high vDimm, except for 3-3-3-8 DDR2-800. Do your stick get warm/hot etc?
Are you meaning when they are running at a higher MHz?

So 450MHz 5-5-5-15 beats 400MHz 4-4-4-12?

Would be good to see a 'memory' benchie of that pls. . .

My ram is good for 1200mhz @ 5,5,5,15 this is indeed better than 900 mhz at 4,4,4,12

 

[easyrider]

Hey mate,

What were all the voltages needed for 3.8ghz stable? Just starting to play with my DS4

1.575v

How you getting on?

 

[easyrider]

Got a new board Minstadave? what happened to your P5N-E?

Do you think 1.575vCore is a 24/7 setting guys?

Yes.

At 125 quid I doubt I will kill it with full load temps of 64c orthos.

The cpu will never be stressed that much for that long and is perfectly ok.

If I kill it in 18 months ....who cares its a throw away chip.

I will have another cpu then anyway.

 

[easyrider]

What about Vdimm, VFSV etc?

V dimm is 2.25v and all the others are +1

 

[easyrider]

Well in all my experience clocking chips and mobos and ram and gfx cards I can safely say I have never killed anything.

(runs off to the dining room to touch wood)

This of course might change when I use phase but some people like to push their hardware.

1.575v is hardly hardcore for a C2D under water.

In fact its not high at all.

 

[easyrider]

Right enough is enough.

wanye, You lack consistency.

You post in my 4300 thread about your clocks and yet claim you dont void warranty and push hardware in the same post.

This goes on,

You talk of lapping etc...

Which in all essence invalidates warranty.


Seems to me that you like to clock and dis people who get better clocks than yourself.

As regard to my opty 170 overclocking...

I dissed you then and many others when you came up with the idea of quad prime for dual cores

Stating it was the upmost test of stabilty.

When what you were doing was making a fool of yourself.

I don't see what the problem is TBH

I have a chip,Iwanna max it out.

Its thats simple.

Finance and safety don't come into the same equation

If it did we would all be running C2D @ 3ghz on stock voltage.

 

[easyrider]

I'm out. I don't mind a bit of friendly banter or even a decent argumentative discussion, but when the start bitch-slapping starts I think it should get moved to General Discussion. And I don't go in there as there is enough aggro in the world without going looking for it.

Me too.

Certain people like to thread trash and the burn in thread in overclocking and cooling is going the same way due to certain people


I mean good gosh lets not talk about maxing out hardware in a overclocking forum?

That would be silly wouldn't it.

 

[easyrider]

Don't be daft and stop twisting my words.

You have been doing this to much of late.

And offer no new overclocking data at all.