- Joined
- 23 Nov 2009
- Posts
- 6,038
- Location
- North Leicestershire
Ocuk don't sell them do they?
Head max on D5 Vario
- Thread starter bigjimmyauk
- Start date
- Joined
- 23 Nov 2009
- Posts
- 6,038
- Location
- North Leicestershire
Probably dumb question time, but is ambient the lowest temp you could achieve using a custom loop, eaxample even if i stuck 4x480 rads in a loop if my room temp is 25 degress i could never see a lesser temp than this unless i used a chiller???
- Joined
- 23 Nov 2009
- Posts
- 6,038
- Location
- North Leicestershire
Always so quick to reply
Where is the best place to check out radiator comparisons
was looking at rx480's or the EK xtx (480)
Always so quick to reply
Where is the best place to check out radiator comparisons
was looking at rx480's or the EK xtx (480)
Hardware max, a German site, is always good
http://www.hardwaremax.net/wasserku...est-ebwb-coolstream-rad-xtx-360-.html?start=3
Always so quick to reply
Where is the best place to check out radiator comparisons
was looking at rx480's or the EK xtx (480)
http://skinneelabs.com/
- Joined
- 23 Nov 2009
- Posts
- 6,038
- Location
- North Leicestershire
Cheers for that mate seems like a good site,
on a side note just looking at possibilities but have you seen any threads where someone has put a 120.4 in a haf x on the roof of the case?
- Joined
- 23 Nov 2009
- Posts
- 6,038
- Location
- North Leicestershire
That build looks so damn sexy, changing my mind about the rad box now, is the sr1-480 thinner than the XSPC that he is using?
roughly the same
- Joined
- 23 Nov 2009
- Posts
- 6,038
- Location
- North Leicestershire
No turning back now mate ordered some fittings of the MM and a couple of other bits from various places. Also time to get a new dremel me thinks.
Time for a dremel spec me thread LOL
- Joined
- 23 Nov 2009
- Posts
- 6,038
- Location
- North Leicestershire
Dremel 300 is tone of the best
yeah i looked it's gone EOL now though apparently, Are the fittings all the same across the dremel range
iirc Bee and Poo are still doing it with some flexi thing for £50
http://www.diy.com/nav/fix/power-to...remel-Multi-Tool-Plus-Kit-300-55-125W-9288252
that one in particular looks appealing
Last edited:
Pretty certain they are
Try ebay, BIN from largish companies offer good deals.
BandQ also sell them
- Joined
- 23 Nov 2009
- Posts
- 6,038
- Location
- North Leicestershire
Pretty certain they are
Try ebay, BIN from largish companies offer good deals.
BandQ also sell them
Look above your post i did some edits
I'm more low tech, I've got a dremel but prefer to use a Jigsaw with metal cutting blades and a hacksaw for the finer work
- Joined
- 23 Nov 2009
- Posts
- 6,038
- Location
- North Leicestershire
That's the one I got
Are the discs robust enough to cut quite a bit of steel on the HAF-X