• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

just got my ocuk 3800 X2 good stepping?

Let the image speak for itself.. :D

pcscoreui7.jpg


Resized ;)
 
Ooooooh nice one ;). What stepping have you got?

I'm getting a LDBHE 0601 XPMW about wednesday next week ;). I should see about the same results with air. Can't wait till I get water cooling in the future.
 
J.D said:
Ooooooh nice one ;). What stepping have you got?

I'm getting a LDBHE 0601 XPMW about wednesday next week ;). I should see about the same results with air. Can't wait till I get water cooling in the future.
Click to expand...
I'm on air :D and I've no idea on the stepping. I wanted to write it down.. But I couldn't resist putting it in straight away.

nicRob said:
What's up with that superpi score naffa?
Click to expand...
I think it's my memory timings. It's poor memory so at stock they arn't anything special 3-4-4-8 I think. And now they're 3-4-4-9.. So not too good.
 
These current week 21/22/23 manchester cores suxx, too power hungry. The toledo/E6 cores are much better, higher oc on lower volts. Going to sell my week 23 and get something else.

My DFI mb needs to provide higher than 1.47v LDT to get 2.7ghz 100% stable, which it currently cant do. vcore is at 1.65, cpu temp is 38c idle, 47 load.

can do 10x270 1.62
9x300 1.65
8x340 1.65

Tried all the dividers to eliminate ram being the issue, pretty sure its an LDT issue because if I oc to 2.6ghz with LDT at 1.47 its stable, but as soon as I drop LDT even at 2.6ghz, it becomes unstable.

Shame, I should have grabbed one of them early 2006 manchesters.
 
Last edited:
Only did a few mins at that speed (was just a quick test, set voltage to 1.55v and used systool to find max fsb). Atm trying to get max stable at stock volts, seems to be 2510mhz atm, hoping to improve that though.
 
There's some pretty decent work going on here. Keep it up guys.

When you're done, make sure you post your results in here so that I can add you to the table. I won't take results straight from here, as people a) haven't finished OCing and b) because some of these are just tests.

:)
 
The stepping on mine is LDBFE 0623XPMW. Haven't had a change to test it yet, as the rest of my rig's still on order but I was wondering if anyone else has got the same stepping & what sort of an O/C do you think should be achievable?
 
Topitoff said:
Well you guys doing better than me; my 3800 X2 won't post :(

Asrock dual sata; OCZ PC4200 EL RAM; BIOS OCW 1.7 no go :mad:

Just took out a working 3000 Winchester @ 270 x 10; set back to defaults in BIOS; installed X2; everything spun up but no post; reset CMOS; still no go.

Put back the winnie; reset all BIOS settings and it it's working fine.

Guess I got a DUD.

:( :mad:
Click to expand...

Not a DUD but not impressed with it at all :(

Problem was it won't post with the OCZ RAM; changed to some Mushkin TCCD and it now POSTs fine.
Seems 3hrs prime stable on both cores @ 2.4GHz at stock volts.
Won't boot into windows at 2.5GHz on stock volts
Priming @ 2.45GHz now.

Was expecting more.

Don't want to use much more voltage as priming @ 2.4GHz gave cpu temp of 56C with freezer 64 cooler. In this weather my 146@ 2.8GHz don't go above 50C.
 
Topitoff

How's your temp's so high?

I have a freezer pro and mbm showing 45c under load @1.425v (42 on P95)

+4deg over default in settings in mbm.

Cooler today i know but still.
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom