Lian Li O11D Vertical GPU Mount that allows for bottom fans?

im4gine3 · 17 Sep 2020 at 17:55

Why not try the Raijintek riser:

https://www.overclockers.co.uk/raij...er-card-cable-pci-slot-adapter-ca-03r-rt.html

I have one and am planning on putting it into a rig i'm building. Has a latch which you can atatch to the underside so the card doesn't sag, and doesn't use up all 7 slots so to retain the use of a couple of pci slots below

Josh Racey · 2 Dec 2020 at 17:22

Hi Guys, i have been following this thread as I'm planning a build that is similar to what you have done. I have managed to get hold of an original Cooler Master V1 bracket. but I am not 100% what riser cable to get, is it worth forking out for a gen4 cable. and also, what length of cable is actually needed. I have spoken to some people who reckon 20cm is too long. Another potential issue is finding a cable where the mounting holes line up correctly with the bracket, but I suppose this issue could be easily solved with a drill..
I have found a universal 10cm 90 degree cable that supports 64gb/s which should not have an issue with gen4 speeds, but I want to know if 10cm is too short.

Sorry for all the waffle...

Eliagon · 18 Dec 2020 at 19:39

I am glad I saw this thread, I am looking to buy a O11D in 90 or so posts time. I'd add this riser to the order, but will probably get my CPU, mobo, waterblocks and GPU in march (corpo bonus time)

Dan Chambers · 23 Dec 2020 at 20:52

Eliagon said:
I am glad I saw this thread, I am looking to buy a O11D in 90 or so posts time. I'd add this riser to the order, but will probably get my CPU, mobo, waterblocks and GPU in march (corpo bonus time)

sorry bit late only just seen your post but the phanteks bracket is also an option in this case I’ve got mine installed no problem. Check out my last post here

https://www.overclockers.co.uk/forums/threads/be-quiet-500dx.18887366/page-6

for an idea of what it could potentially look like. You could possibly fit a slim rad and slim fans at the bottom with this bracket installed. I don’t really know as I’ve only got an aio for comparison

Saul Farrell · 26 Dec 2020 at 13:39

Josh Racey said:
Hi Guys, i have been following this thread as I'm planning a build that is similar to what you have done. I have managed to get hold of an original Cooler Master V1 bracket. but I am not 100% what riser cable to get, is it worth forking out for a gen4 cable. and also, what length of cable is actually needed. I have spoken to some people who reckon 20cm is too long. Another potential issue is finding a cable where the mounting holes line up correctly with the bracket, but I suppose this issue could be easily solved with a drill..
I have found a universal 10cm 90 degree cable that supports 64gb/s which should not have an issue with gen4 speeds, but I want to know if 10cm is too short.

Sorry for all the waffle...

I'm not sure about the lengths but a gen 3 works just fine. I have the same coolermaster mount as you and am using the generic riser cable that comes with it with my 3080 and there are no bottlenecks from what I can see when I've ran various benchmarks. The only thing with the V1 mount is that if you have high clearance RAM such as the corsair vengeance pro rgb, the GPU will have to 'lean' a small bit on the ram. But that hasn't caused any issues for me whatsoever...

MissChief · 26 Dec 2020 at 14:51

Is anyone using the official Lian Li vertical mount? I have one in order but also have three 120mm Uni fans at the bottom of the case. Does anyone know if this will fit?

Dan Chambers · 26 Dec 2020 at 21:27

MissChief said:
Is anyone using the official Lian Li vertical mount? I have one in order but also have three 120mm Uni fans at the bottom of the case. Does anyone know if this will fit?

I’m pretty sure I read somewhere you can’t use bottom fans if you use the Lian Li mount as there’s a support arm/bracket that you have to attach to the bottom of the case which takes up the first two fan mounts. I think that’s why a lot of people prefer to use the Phanteks or Coolermaster brackets instead as they still allow you to use the bottom fan mounts, and in your case with those beautiful uni fans you surely going to be able to see those?! lol

anTastico · 24 Feb 2021 at 19:19

MissChief said:
Is anyone using the official Lian Li vertical mount? I have one in order but also have three 120mm Uni fans at the bottom of the case. Does anyone know if this will fit?

I have one and have loads of room but I am using the O11D XL.

Dan Chambers said:
I’m pretty sure I read somewhere you can’t use bottom fans if you use the Lian Li mount as there’s a support arm/bracket that you have to attach to the bottom of the case which takes up the first two fan mounts. I think that’s why a lot of people prefer to use the Phanteks or Coolermaster brackets instead as they still allow you to use the bottom fan mounts, and in your case with those beautiful uni fans you surely going to be able to see those?! lol

The bracket attaches to the side, not bottom, as in, under the motherboard.

MissChief · 24 Feb 2021 at 20:39

Sorry I didn’t update this! Ended up going with the Phanteks mount which has space for the fans but also feels secure too. A nice bit of kit.

Pro4TLZZ · 9 Jul 2021 at 19:35

MissChief said:
Sorry I didn’t update this! Ended up going with the Phanteks mount which has space for the fans but also feels secure too. A nice bit of kit.

can you send pics pls?

thanks

cjgardens · 9 Sep 2022 at 19:56

What brackets are people using. Still the phanteks?

MissChief · 10 Sep 2022 at 01:17

Pro4TLZZ said:
can you send pics pls?

thanks

Sorry I must have completely missed this!

cjgardens said:
What brackets are people using. Still the phanteks?

The Phanteks mount now comes with a PCI-E 4.0 Riser so assuming nothing else has changed it still a good mount.

cjgardens · 10 Sep 2022 at 02:01

MissChief said:
Phanteks

Seen a few very cheap brackets. Are they worth it? Seems crazy money for what they are.

cjgardens · 11 Sep 2022 at 19:41

Is there a way to vertical mount a GPU, Bottom rad with fans? I want to put a distro plate in, but it will it work with GPU mount and bottom rad?

Edited to make sense.

MissChief · 11 Sep 2022 at 20:00

cjgardens said:
Seen a few very cheap brackets. Are they worth it? Seems crazy money for what they are.

They're not cheap but the PCI-E gen 4 ones need to be made very precisely to work properly.

cjgardens said:
Is there a way to vertical mount a GPU. Bottom rad with fans? I want to put a distro plate in but it won't work with GPU mount and bottom rad?

You'd be very tight for space with a bottom mounted AIO/WC Rad and fans for them too. You'd likely be choking the airflow in a big way.

cjgardens · 11 Sep 2022 at 20:14

MissChief said:
They're not cheap but the PCI-E gen 4 ones need to be made very precisely to work properly.

You'd be very tight for space with a bottom mounted AIO/WC Rad and fans for them too. You'd likely be choking the airflow in a big way.

I'm thinking custom. So a thin rad and fans at the bottom. Vertical mount, distro next to the mobo and top rad. Will be plenty air flow. A GPU won't stop it much. It's only thin with a block on.

So. Reading the first few pages. It looks like i would need some sort of mount that's a lot higher than usual. Not far from the CPU or Infront of it, if that's a thing?

Deluxe1 · 6 Oct 2022 at 13:48

Looks like I'm going to have to get a mount for my 4090 for the o11d, will this one allow me to have my fans mounted at the bottom?

O11D-1 VERTICAL GPU BRACKET KIT PCI-e 4.0 - LIAN LI is a Leading Provider of PC Cases | Computer Cases

O11D Vertical GPU bracket kit PCI-e 4.0 Vertical GPU mount accessory for O11 Dynamic. Offers great performance and shows off the GPU at a great new angle. O11 Dynamic Perfect Match 4 extension slots that support thick GPU and mount at the position preferred. Gen 4.0 PCIe Riser Cable Includes a...

lian-li.com

MissChief · 6 Oct 2022 at 13:54

Deluxe1 said:
Looks like I'm going to have to get a mount for my 4090 for the o11d, will this one allow me to have my fans mounted at the bottom?

O11D-1 VERTICAL GPU BRACKET KIT PCI-e 4.0 - LIAN LI is a Leading Provider of PC Cases | Computer Cases

O11D Vertical GPU bracket kit PCI-e 4.0 Vertical GPU mount accessory for O11 Dynamic. Offers great performance and shows off the GPU at a great new angle. O11 Dynamic Perfect Match 4 extension slots that support thick GPU and mount at the position preferred. Gen 4.0 PCIe Riser Cable Includes a...

lian-li.com

I don't believe it will, at least it never used to.