Loft boarding project started
- Thread starter danlightbulb
- Start date
That reminds me - one of the jobs we will need to do first is to buy a new loft hatch with integrated ladder, and move it over the landing. Some genius thought putting the loft hatch over the stairs was a good move. Tall ceilings mean I have to lug a big aluminium ladder into the house to get up there at present!
- Joined
- 14 Jul 2005
- Posts
- 9,356
- Location
- Birmingham
Im thinking of carrying on and doing this bit as well.
It has lower headroom here and obstructed by the cross members. But I could still slide boxes around.
I estimate a further £300-350 to do that section. £100 in timber, £150 in floor panels and £50-100 in hardware.
It would be a further 3.6m x 2.4m of floor area.
I would have to resin fix a ledger board to the gable wall at the back and then span 2x6's from there to the newly installed framework.
It has lower headroom here and obstructed by the cross members. But I could still slide boxes around.
I estimate a further £300-350 to do that section. £100 in timber, £150 in floor panels and £50-100 in hardware.
It would be a further 3.6m x 2.4m of floor area.
I would have to resin fix a ledger board to the gable wall at the back and then span 2x6's from there to the newly installed framework.
Soldato
- Joined
- 22 Feb 2014
- Posts
- 2,926
Im thinking of carrying on and doing this bit as well.
It has lower headroom here and obstructed by the cross members. But I could still slide boxes around.
I estimate a further £300-350 to do that section. £100 in timber, £150 in floor panels and £50-100 in hardware.
It would be a further 3.6m x 2.4m of floor area.
I would have to resin fix a ledger board to the gable wall at the back and then span 2x6's from there to the newly installed framework.
Fill up the space you have created before you waste money on storage that you might never need
especially as its a lot of money for not a lot of storage
- Joined
- 14 Jul 2005
- Posts
- 9,356
- Location
- Birmingham
I see what you're saying but once the existing storage is filled it will be harder to do the work on the other section.
Soldato
- Joined
- 28 Dec 2017
- Posts
- 9,712
- Location
- Beds
I'd say do it while your head is in the game and all the tools are handy.
- Joined
- 14 Jul 2005
- Posts
- 9,356
- Location
- Birmingham
Ive started removing the insulation and hoovering it out.
I think I have to do it in my mind otherwise I won't stop thinking about it. If nothing else I will do a proper job clearing up all the soot and debris, checking there's no dodgy wiring hiding under there, checking any tears in the felt etc.
I think I have to do it in my mind otherwise I won't stop thinking about it. If nothing else I will do a proper job clearing up all the soot and debris, checking there's no dodgy wiring hiding under there, checking any tears in the felt etc.
- Joined
- 14 Jul 2005
- Posts
- 9,356
- Location
- Birmingham
Im having second thoughts about this last section. Ive cleared it all and hoovered out another 4 Henry hoover bags full of soot and debris, found and disposed of another old wasp nest and found another small hole to patch in the roofing felt. The wiring is fine. So its been worthwhile clearing it to clear up and inspect it.
But Im not sure about framing and flooring it. I'd have to attach a ledger beam to that far wall in the picture (the green laser level line marks the position) and then span back to where Im sitting taking the photo.
7x2 attached to the wall with resin fixings (picked that size to ensure I cover 2 full bricks in height to make sure I can get the resin fixings central in the brick).
6x2 spanning back to my position.
And Im a bit concerned about it because that gable end wall isn't very straight or well built. The mortar is like dust. And it sits above a bay window opening that is probably supported by some wooden beams which I can't confirm the dimensions of. It can probably take the load, there must already be 2 ton of brick wall there. Its just whether I disturb things by trying to make the resin fixings and get the ledger in place.
I don't know why but Im more scared/nervous of this section than I was for the whole rest of it. Its a big ledger board (3.6m 7x2) and a big span back to me with 6x2 (also about 3.6m).
But Im not sure about framing and flooring it. I'd have to attach a ledger beam to that far wall in the picture (the green laser level line marks the position) and then span back to where Im sitting taking the photo.
7x2 attached to the wall with resin fixings (picked that size to ensure I cover 2 full bricks in height to make sure I can get the resin fixings central in the brick).
6x2 spanning back to my position.
And Im a bit concerned about it because that gable end wall isn't very straight or well built. The mortar is like dust. And it sits above a bay window opening that is probably supported by some wooden beams which I can't confirm the dimensions of. It can probably take the load, there must already be 2 ton of brick wall there. Its just whether I disturb things by trying to make the resin fixings and get the ledger in place.
I don't know why but Im more scared/nervous of this section than I was for the whole rest of it. Its a big ledger board (3.6m 7x2) and a big span back to me with 6x2 (also about 3.6m).
