Mayhems Pastel White Splitting

So my Mayhems Pastel White is separating now. I woke up to see a more translucent colour in the CPU block and one of the pipes. Once turned on it mixed up ok but this never happened with the previous Mayhems Pastel White fluid i purchased.

For those who have the issue did you contact OCUK or Mayhems about the replacement? Bare in mind i purchased this fluid less than 14days ago :)
 
Carl_Bennetts said:
So my Mayhems Pastel White is separating now. I woke up to see a more translucent colour in the CPU block and one of the pipes. Once turned on it mixed up ok but this never happened with the previous Mayhems Pastel White fluid i purchased.

For those who have the issue did you contact OCUK or Mayhems about the replacement? Bare in mind i purchased this fluid less than 14days ago :)
Click to expand...
Gutted for ya mate, looks liek a fluid cleanse for you. I'll elt the others post what they did... you got a picture of what it looked like just for interest?
 
Carl_Bennetts said:
So my Mayhems Pastel White is separating now. I woke up to see a more translucent colour in the CPU block and one of the pipes. Once turned on it mixed up ok but this never happened with the previous Mayhems Pastel White fluid i purchased.

For those who have the issue did you contact OCUK or Mayhems about the replacement? Bare in mind i purchased this fluid less than 14days ago :)
Click to expand...
Thats what happened to mine. I was able to mix it in when starting the PC but after about another week that failed to work. I raised a support ticket with Mayhems via their website.
 
Carl_Bennetts said:
So my Mayhems Pastel White is separating now. I woke up to see a more translucent colour in the CPU block and one of the pipes. Once turned on it mixed up ok but this never happened with the previous Mayhems Pastel White fluid i purchased.

For those who have the issue did you contact OCUK or Mayhems about the replacement? Bare in mind i purchased this fluid less than 14days ago :)
Click to expand...

This is what happened to me. Although I've yet to see any particles "setting" anywhere, so I'venot been in a rush to flush it. I'm shortly going to be replacing the motherboard in my system so I'll be using it as an opportunity to flush and replace the fluid, however I'd still like to stick with pastel white so I might go with the EK Solid Cloud White.
 
I'll take some photos for tomorrow morning as my system will have been off for a long period so I'm sure I'll see the separation more easily.

Also, OCUK informed me they are not aware of the issue with the Mayhems Pastel White, I did point them to this thread. Although I brought the last 2 bottles of the pastel white so no one else will fall to be the next victim i suppose haha
 
Mayhems stuff to fix the wifes rig turned up. Quite a lot of product here but I think they are basically saying to me that the pastel purple and pastel white I bought are junk and I won't be able to use pastel moving forward.



I thank Mayhems for the support but now I still have to spend a few hours ripping the thing apart :(
 
Carl_Bennetts said:
It was pretty bad this morning!
AF3U6mP.jpg
Click to expand...


Wow, so, does it mix up when you turn the machine on then or does it kinda stay like that? So what I'm seeing is it just settles over the bottom half of pipes and in the block all thick... looks crap that I'll be honest... would look even worse in a colour like red or blue or something as it'd really stand out
 
Last edited:
pugheaven said:
Wow, so, does it mix up when you turn the mac hine on then or does it kinda stay like that? So what I'm seeing is it just settles over the bottom half of pipes and in the block all thick... looks crap that I'll be honest... would look even worse in a colour like red or blue or something as it'd really stand out
Click to expand...

Once i start the machine it blends up well but i'm not sure how well it really is blending tbh. Looks fine now thouhg, i'm just worried it's clogging up my new CPU block if it's separating like that. Don't think they have said not to use the fluid yet?
 
Jay85 said:
Really putting me off getting some premixed stuff, ive been pondering over some of the EK cryofuel but again some mixed reviews with bad batches... really cba dismantling the loop cos of bad fluid, its a lot of work and time.
Click to expand...

I used Mayhem Pastel White before this new stuff and that was fantastic. It just seems to be a problem with this batch in March or from then anyways. I still find it odd OCUK don't know about this and haven't pulled there pastel range just encase.
 
Carl_Bennetts said:
Once i start the machine it blends up well but i'm not sure how well it really is blending tbh. Looks fine now thouhg, i'm just worried it's clogging up my new CPU block if it's separating like that. Don't think they have said not to use the fluid yet?
Click to expand...

When i had this fluid in mine back in January/Feb, i found it didn't cling or separate in the blocks but it was clocking in the radiators. It took a ton of flushing to actually dislodge the particles that was still stick in the radiators.
 
Carl_Bennetts said:
I used Mayhem Pastel White before this new stuff and that was fantastic. It just seems to be a problem with this batch in March or from then anyways. I still find it odd OCUK don't know about this and haven't pulled there pastel range just encase.
Click to expand...
I saw a post somewhere that they haven't received many complaints about it so thats why they haven't pulled it yet (sample size too small maybe?). Think it might have been Vince who mentioned it.
 
Jay85 said:
Really putting me off getting some premixed stuff, ive been pondering over some of the EK cryofuel but again some mixed reviews with bad batches... really cba dismantling the loop cos of bad fluid, its a lot of work and time.
Click to expand...
Yeah I'm running EK Cryofule but just plain clear... I've got 2 litres of the acid green brand new in bottles lol as well but didn't suite my build so stayed clear. I've always wondered about the pastels and that stuff that ysed to have that crystal effect as that seperated as well. TBH, I'd expect most of us wanna fill the loop and just run it with as low maintenance as possible, draining is such a ball ache and I find getting bubbles out the bigegst pain, it's took me 10 days from adding an additional radiator to actually get it 100% bubble free... and I mean 100%
 
pugheaven said:
Yeah I'm running EK Cryofule but just plain clear... I've got 2 litres of the acid green brand new in bottles lol as well but didn't suite my build so stayed clear. I've always wondered about the pastels and that stuff that ysed to have that crystal effect as that seperated as well. TBH, I'd expect most of us wanna fill the loop and just run it with as low maintenance as possible, draining is such a ball ache and I find getting bubbles out the bigegst pain, it's took me 10 days from adding an additional radiator to actually get it 100% bubble free... and I mean 100%
Click to expand...

It is, i hate draining! I could spend a good hour draining before i even begin taking stuff apart to clean it. It's such a ball ache to do, even i have a drain valve i don't get rid of everything thats sat in the rads etc especially the fluid on the bottom rad. My last drain i ended up taking off the pipes where i could and then fitting plugs on the rads to remove them safely and draining over a sink instead.

I had the EK cryofuel fire orange or whatever it was called and that separated within a week and left a horrendous mess! Same goes with dyes, i want to try those but i dont want to stain my blocks. I know Acrylic shouldn't stain but still you always have that inkling feeling inside that it could do... haha
 
Vince said:
Mayhems stuff to fix the wifes rig turned up. Quite a lot of product here but I think they are basically saying to me that the pastel purple and pastel white I bought are junk and I won't be able to use pastel moving forward.



I thank Mayhems for the support but now I still have to spend a few hours ripping the thing apart :(
Click to expand...
Howd you get on? All done, what did you go for instead?
 
pugheaven said:
Howd you get on? All done, what did you go for instead?
Click to expand...

So far im just running the clear, it was a massive 3 hour mess pulling it apart. Loads of white crud came out of the rad and it was just a total mess. That cleaning stuff is pretty good but one things for sure, its not clearing the rad out of the build up of white. It almost looks like congealed plastic when it comes out, all very odd.
 
Vince said:
So far im just running the clear, it was a massive 3 hour mess pulling it apart. Loads of white crud came out of the rad and it was just a total mess. That cleaning stuff is pretty good but one things for sure, its not clearing the rad out of the build up of white. It almost looks like congealed plastic when it comes out, all very odd.
Click to expand...
Yeah I was thinking the pipes and everything is the easiest problem is you just can't see what's in those rads... such a shame as the pastels look amazing but that's really annoying I do feel peoples pain on this, draining is the biggest ballache, but then when you literally have to flush out... took me hours just flushing an acid green out of my system it's amazing how and where it stays in tiny little gaps etc...
 
You must log in or register to reply here.
Back
Top Bottom