Memory Latency should be lower?
- Thread starter DLD
- Start date
I don't know about the G.SKill Trident Z Neo, but i've had my Team Group 8Pack Edition 2x16GB 3600MHz kit running 3800MHz, CAS14, FLCK1900, 1.5V for over a year.
Its perfectly fine, idle its only slightly warm to the touch. TestMem5 0.12 with Extreme1@anta config it runs without errors for hours. Apparently thats a super aggressive RAM testing program too. Those sticks are rated 1.20-1.40v
I would run 1.5v to try to get more out of the ram but it gets over 50c and will get errors. I already have pretty good air flow in my case. So need to figure out a clean way to get a fan blowing directly over the RAM or something to get the temps lower.
What are you benching / playing to take the ram over 50c and generate the errors? I have an Infrared thermometer laser temperature gun so can try the same. RAM temp idle is ~25c
Inside case looks like this. Front two case intake fans and rear case fan are 'Noctua NF-A14 PWM Chromax Premium Grade Fan - 140mm'
All 3 are locked at 42% to keep noise at a constant level thats not loud but provides good cooling
Last edited:
I test with Karhu and it gets to around 53c in Warzone at 1.5v. At 1.45 it gets up to 47c. Here is a pic of my case. Front has 3 x 120mm intake, 280mm AIO top mount with 2 x 140mm exhaust and 1 x 140mm rear exhaust.
Last edited:
I test with Karhu and it gets to around 53c in Warzone at 1.5v. At 1.45 it gets up to 47c. Here is a pic of my case. Front has 3 x 120mm intake, 280mm AIO top mount with 2 x 140mm exhaust and 1 x 140mm rear exhaust.
After an hour and half of Warzone memory is 45c (laser temp sensor so not exactly 100% accurate)
Memtest86 earlier didnt seem to do much, but only left it 3 hours. Temp was 29c
I don't have Karhu to test
Very colourful PC!
Lol Yeah I haven't got around to changing the colors yet. So it is currently RGB puke for now.
I use HWMonitor for temps and even at idle I'm around 35c on the hottest RAM stick.