Soldato
- Joined
- 18 Mar 2008
- Posts
- 12,751
Fantastic, you're using the monsta? We're going to need temps for it once the project is complete!
MoNsTa
- Thread starter clone
- Start date
Caporegime
Looking good mate. 
Canny wait to see the end result.
Canny wait to see the end result.
13/04/09
A little update on some work done.
Got some Lian li vented pci blanking plate`s secondhand powdercoated satin black and i also bought black Lian li M3 case screws.
My Lian li Hard drive caddy front powdercoated white and the body painted satin black.
Also painted the lower front fan mount.
Black set of wheels fitted look better than the stock silver.
Top 140mm Aerocool fans with the blades painted white,these fans fit well in the top of the case and i have them both blowing in as they will help move the hot air inside.
What the front of the case looks like finished.
And the last one of some cable tidying ive done,will take some more tomorrow if i can.
Had a problem with my cable and cpu backplate cuts as they where done for the x48 rampage but i have moved to the rampage x58 i had to redo them a bit bigger so i will fit some blowhole trim to tidy them up.
A little update on some work done.
Got some Lian li vented pci blanking plate`s secondhand powdercoated satin black and i also bought black Lian li M3 case screws.
My Lian li Hard drive caddy front powdercoated white and the body painted satin black.
Also painted the lower front fan mount.
Black set of wheels fitted look better than the stock silver.
Top 140mm Aerocool fans with the blades painted white,these fans fit well in the top of the case and i have them both blowing in as they will help move the hot air inside.
What the front of the case looks like finished.
And the last one of some cable tidying ive done,will take some more tomorrow if i can.
Had a problem with my cable and cpu backplate cuts as they where done for the x48 rampage but i have moved to the rampage x58 i had to redo them a bit bigger so i will fit some blowhole trim to tidy them up.
Associate
Its white and black its white and black its white and black! 
Seriously love the colour scheme haha, the white and just looks so nice!
Those fans look great in the top, subtle, but great
Seriously love the colour scheme haha, the white and just looks so nice!
Those fans look great in the top, subtle, but great
Associate
It really does look really nice in white and the black components makes it!
Aye white is the new black
14/04/09
Some parts that i got with the case.
6 x 140mm Yate loons.
Model: D14SL-12
Air Flow: 46 CFM
Fan Speed: 1000 RPM
Noise Level: 25 dBA
Fan Size: 140x140x25 MM
2 x MeshxPanel (black) like hens teeth to find at the moment.
XSPC 3/8" 5/8" White hose.
Heatkiller Rev 3.0 LT
14/04/09
Some parts that i got with the case.
6 x 140mm Yate loons.
Model: D14SL-12
Air Flow: 46 CFM
Fan Speed: 1000 RPM
Noise Level: 25 dBA
Fan Size: 140x140x25 MM
2 x MeshxPanel (black) like hens teeth to find at the moment.
XSPC 3/8" 5/8" White hose.
Heatkiller Rev 3.0 LT
Last edited:
A wee update.
Made up some custom cables for my Nexus fans and braided them.
1X 120MM lower front intake
1X 120MM Lian li hard drive caddy
1X 120MM Rear middle outake
2X 80MM Lower rear outake`s
Made up some custom cables for my Nexus fans and braided them.
1X 120MM lower front intake
1X 120MM Lian li hard drive caddy
1X 120MM Rear middle outake
2X 80MM Lower rear outake`s
Associate
eurgh, prefer the black aluminium finish. other than that, looks good.
Associate
White tubing too always looks good e.g.
always looks good e.g.
Not much of a update but what the hay.
Got some white 120mm wire fan grills will only be fitting 2 but i got 1 extra just incase,also some blow hole trim for my cpu backplate and motherboard cuts.
1/4" p clips for cable the cables at the back of the motherboard tray,also ordered 9mm and 19mm for the psu cables,and some 3mm domehead screws/washers and nuts to fix the p clips.
Need to braid my 24pin psu cable and both videocard wires ala murdermod
Got some white 120mm wire fan grills will only be fitting 2 but i got 1 extra just incase,also some blow hole trim for my cpu backplate and motherboard cuts.
1/4" p clips for cable the cables at the back of the motherboard tray,also ordered 9mm and 19mm for the psu cables,and some 3mm domehead screws/washers and nuts to fix the p clips.
Need to braid my 24pin psu cable and both videocard wires ala murdermod
Soldato
looking great..keep it up
Soldato
- Joined
- 13 Mar 2006
- Posts
- 6,712
Looks good - shame they're not 14cm guards, though I guess no-one does them.
They do them in black and chrome,i may get some and spray them.
Soldato
This would be a perfect rad for this project
EDIT: Oh silly me, that is the one you got.
EDIT: Oh silly me, that is the one you got.
Last edited:
This would be a perfect rad for this project
EDIT: Oh silly me, that is the one you got.
I have ask the bloke at feser if i spray my rad will i still have the warranty and he said yes so a colour change may be on the cards for my rad
@gt_junkie thanks bud
Soldato
Very nice mate.