Mountain Mods U2-UFO or TJ-07?
- Thread starter w3bbo
- Start date
Worth getting imo m8 it`s well built and is just the right size,also you can fit a led into the middle of the res(white circle in the middle of photo) to colour your water if need be.
Has a hole at the top of the res to put the water in,come`s with a allen key plug and rubber seal.
EDIT:Here is a piccy of the back of them.
Has a hole at the top of the res to put the water in,come`s with a allen key plug and rubber seal.
EDIT:Here is a piccy of the back of them.
Another little update.
Fitted my D-TEK cpu block and my DD 680i northbridge to my EVGA motherboard.
Word of warning if anybody is fitting this block to the board, on one of the mount`s you will need to cut the plastic washer a little as it get`s in contact with a chip on the board,i put a rubber washer on as well,so that when the nut was tightned up it didnt come into contact with the chip.
In the photo below it`s the bottom right hand side one.
No biggy just take your time when putting the block on.
Also got a email from my black tygon hose guy,there has been a custom`s mess up his side,somit to do with giving them the wrong weight of the parcel,was only over by 4 oz
Fitted my D-TEK cpu block and my DD 680i northbridge to my EVGA motherboard.
Word of warning if anybody is fitting this block to the board, on one of the mount`s you will need to cut the plastic washer a little as it get`s in contact with a chip on the board,i put a rubber washer on as well,so that when the nut was tightned up it didnt come into contact with the chip.
In the photo below it`s the bottom right hand side one.
No biggy just take your time when putting the block on.
Also got a email from my black tygon hose guy,there has been a custom`s mess up his side,somit to do with giving them the wrong weight of the parcel,was only over by 4 oz
Looks sweet m8, just recieved my UFO yesterday, my build is going to be pretty much the same as yours.
Yate Loon x 10
Thermochill PA 120.3
Swiftech MCR-220 (As this fits without modding to the back fans of the UFO)
Tygon 1/2
MicroRes X 2
Laing DDC w/ Petra's DDCT-01 Top Combo X 3 (Going for dual pumps on main loop, add a bit of redundancy and backup in there)
D-TEK FuZion CPU Block
EK-FC8800 GTX x 2
MIPS ABIT IN9 32X MAX Freezer Set
Pls keep the pics coming, I am undecided on the MCR-220 really would like another Thermochill in there.
Also wishing I had been a bit more daring with the color choice after seeing how awsome your white one looks
Yate Loon x 10
Thermochill PA 120.3
Swiftech MCR-220 (As this fits without modding to the back fans of the UFO)
Tygon 1/2
MicroRes X 2
Laing DDC w/ Petra's DDCT-01 Top Combo X 3 (Going for dual pumps on main loop, add a bit of redundancy and backup in there)
D-TEK FuZion CPU Block
EK-FC8800 GTX x 2
MIPS ABIT IN9 32X MAX Freezer Set
Pls keep the pics coming, I am undecided on the MCR-220 really would like another Thermochill in there.
Also wishing I had been a bit more daring with the color choice after seeing how awsome your white one looks
Where are you gonna fit your hard drives?
I was planning to do it how Sneaky did it on his rig.
http://www.xtremesystems.org/forums/showthread.php?t=109138&page=7
About half way down is pic.
But now case has arrived I have seem to have different hard drive fittings, I have brackets.
I was planning to do it how Sneaky did it on his rig.
http://www.xtremesystems.org/forums/showthread.php?t=109138&page=7
About half way down is pic.
But now case has arrived I have seem to have different hard drive fittings, I have brackets.
Got one of these from ocuk,pitty it came in blue but they will match my DD filpot`s.
http://www.overclockers.co.uk/showproduct.php?prodid=HS-000-OK
Going to mount my hard drive in the front bay above my DVD writer.
http://www.overclockers.co.uk/showproduct.php?prodid=HS-000-OK
Going to mount my hard drive in the front bay above my DVD writer.
Ok here we are, this is a build in progress and won't be finished for at least 2-3 weeks as I am still waiting on parts to come in, but hey I made a start 
U2-UFO Black Powder Coat - Original Top
12 x YATE LOON 120mm Clear Case Fan with four blue leds - D12SL-12
Swiftech MCRES's Added
U2-UFO Black Powder Coat - Original Top
12 x YATE LOON 120mm Clear Case Fan with four blue leds - D12SL-12
Swiftech MCRES's Added
Last edited:
Associate
- Joined
- 28 Oct 2005
- Posts
- 305
- Location
- Stoke-on-Trent
Looking good guys! I cant believe how good the white looks! If i ever got one of these case i think i would have to have it in white now
It`s a bit like the good & the bad side of the force me think`s 
Got some more piccys of me build, all i can say is god bless stella artois
Piccy of the twins fitted on the motherboard.
Raptor 150 x gb in a hard drive bay thingy.
Got some more piccys of me build, all i can say is god bless stella artois
Piccy of the twins fitted on the motherboard.
Raptor 150 x gb in a hard drive bay thingy.
Top view of case with pa 160 & hard drive bay thingy.
And for W3bbo, here is the problem with the DD 680i block on our motherboard,all that`s needed to make it fit ok is a sharp craft knife to sort it oot
Right back to ma stella
And for W3bbo, here is the problem with the DD 680i block on our motherboard,all that`s needed to make it fit ok is a sharp craft knife to sort it oot
Right back to ma stella
. Why they changed from black is beyond me.
if it take`s much longer im going to get me some clear for now.
Looking good Clone
How is the clearance on the SB block when running SLI ?
I have an Abit IN9, everything ready to go exept for the SB and Mosfet blocks.
Still looking for a Mosfet cooler, its the only thing thats stopping me from building atm.
How is the clearance on the SB block when running SLI ?
I have an Abit IN9, everything ready to go exept for the SB and Mosfet blocks.
Still looking for a Mosfet cooler, its the only thing thats stopping me from building atm.
Put it this way m8 tight is all i`ll say but ok in the endBaxtor said:Looking good Clone
How is the clearance on the SB block when running SLI ?
I have an Abit IN9, everything ready to go exept for the SB and Mosfet blocks.
Still looking for a Mosfet cooler, its the only thing thats stopping me from building atm.
Lol yeh w3bbo,got some clear tygon coming to get me started and when or if the black stuff turns up i`ll put it on later on in the year.