Mountain Mods U2-UFO or TJ-07?

Cool.

So if I fitted a bix to the back where could I put the HD's? Thx m8../me goes shopping for bix/GT :)
 
w3bbo said:
Cool.

So if I fitted a bix to the back where could I put the HD's? Thx m8../me goes shopping for bix/GT :)
Click to expand...
Stumped m8,was thinking of mounting my hd on the back of the motherboard on rubber dampers,would have been ok if you was only fiiting a single rad at the back as you could use one of them coolermaster 4 into 1 hard drive thing`s.

Wee update
Both DDC 18w pump`s with petra top`s where installed today with some petra gell pads.

IMG_0001-4.jpg


IMG_0002-6.jpg

Also took out the clear window`s and im in the middle of drilling the new hole`s for the smoked plexi window`s fitted with black rivet`s .
__________________
 
Be very carefull with the gel pads m8 as although the reduce the noise and vibration of the pumps they also insulate some of the heat - been a few reports of the ddc2's dying on XS that have been mounted this way.

I'll just wait I think before making the 2nd loop. Don't really need it until I get a 2nd GTX anyway as the PA will cope with the cpu + gfx. Don't really wanna make it too complex and messy - I just want it working for now :)
 
Aye was worried about that but im hoping the 120mm fan will help cool the pump`s down,if not ive got a old mouse pad i can cut up and maybe put some strips around the bottom edge or somit.

EDIT: now cut the gell pads into 2 thin strip`s that now sit on just 2 edge`s of the bottom pump so leaving a gap for the cool air from the 120mm to help cool.

w3bbo ive got spare gell if you need it m8.
 
Last edited:
Don't reckon I'm gonna need it m8 as mine will be mounted on the dampers with heatsinks stuck to the bottom like the ones over at XS. Might take it off you for the D4 though when I get my 2nd loop off the ground. Decided to stick to one loop for now until I get he 2nd gtx.
 
some git woke me up real early this morning.....lucky i answered the door :p

one item not MM build related, but he decided to come with the other gear :D

img0133yp5.jpg
 
Hehe nice one m8,dont forget keep us updated with the build :)

Scare`s you a bit when you see how many fan`s go into this case :D
 
w3bbo said:
Clone where do you fit the HD's? I see you have the pa160 in the HD-racks place, aint using the HD-rack? Also what fitment are the dual fans on the back - thermochill or BIX?
Click to expand...

The hard drive brackets can be screwed to the back radiator so they sit infront of the radiator.
At least looking at mine I am hoping thats the way it goes.
 
clone said:
Hehe nice one m8,dont forget keep us updated with the build :)

Scare`s you a bit when you see how many fan`s go into this case :D
Click to expand...

yeh luckily the yates are a nice price as i ended up ordering 12 of the blue leds and 8 regulars, a few will go on my other rigs and a couple for spare.

wicked finish on the case, very nice work. i have a feeling this case will be far superior to my V2000 in every department.
 
that's a nice hose you have their m8 :p :D

should contrast nicely with your white MM, i'm looking forward to seeing your case finished tbh.
 
These little bits turned up for me too :

Picture-1.jpg


....and my case is in Coventry (customs?) so hopefully that will be with me before the week is out so I can finally get started on the new build. :D
 
Looking good there w3bbo :)

Dam that was hard work putting all that hose in this case.

IMG_0009.jpg


IMG_0008.jpg


IMG_0007-2.jpg


IMG_0006_1.jpg


Just got to leak test today.
 
nice black and white theme sadly the graphics cards let it down a bit
the hoses look like a snakes pit i can see how it was complicated and hard to put in
 
You must log in or register to reply here.
Back
Top Bottom