NR200 Owner's Thread

Darren_uk · 4 Sep 2020 at 14:43

I will drill out 1 of the 3 pop-rivets & see if I got the right screws/thread thickness to replace
the Rivet.

If I do change the front frame around, this means no artwork on top since I be using the plastic frame with hardly any surface

PinkFloyd · 4 Sep 2020 at 15:38

You could grab a rivet gun and rivets for a couple of quid as an alternative. Think I got one for about £7 last year!

Richard Holm · 4 Sep 2020 at 15:52

No update yet on my NR200P shipping from that company owned by the richest man in the world. I did see I could buy a NR200 non-P though thru a 3rd party vendor for $180 USD! Such a deal for a case that is $80. Lol.

Yea Darren, that wrap is pretty slick and the new shorter legs are much less drastic than the previous. Hope your pop rivet test works out.

Bazzards · 4 Sep 2020 at 15:56

Finally up and running. Love the size of the case. Not checked temps under load, but will report back.

Richard Holm · 4 Sep 2020 at 15:57

Wow what sized monitors? That case looks so small next to them!

Bindlestiff · 4 Sep 2020 at 16:02

Bazzards said:
Finally up and running. Love the size of the case. Not checked temps under load, but report back.

Looks great! Going for a similar setup myself, so I'll post a comparison image of it in 2025 when my case turns up!

KaRaPuZ · 4 Sep 2020 at 16:14

My build

and I am looking a new cpu cooler to replace writh prism

CPU: AMD Ryzen 9 3900X 3.8 GHz 12-Core Processor
Motherboard: Asus ROG Strix X570-I Gaming Mini ITX AM4 Motherboard
Memory: G.Skill Trident Z 32 GB (2 x 16 GB) DDR4-3400 CL16 Memory
Storage: Western Digital SN750 500 GB M.2-2280 NVME Solid State Drive
Video Card: EVGA GeForce GTX 1660 Ti 6 GB SC ULTRA GAMING Video Card
Case: Cooler Master MasterBox NR200 Mini ITX Desktop Case
Power Supply: Corsair SF 750 W 80+ Platinum Certified Fully Modular SFX Power Supply

Bazzards · 4 Sep 2020 at 16:20

27inch monitors. The case Is v small.

Darren_uk · 4 Sep 2020 at 17:05

PinkFloyd said:
You could grab a rivet gun and rivets for a couple of quid as an alternative. Think I got one for about £7 last year!

Just as easy with a 1m drill bit takes secs, like cutting a slice of cake

Darren_uk · 4 Sep 2020 at 17:09

Richard Holm said:
No update yet on my NR200P shipping from that company owned by the richest man in the world. I did see I could buy a NR200 non-P though thru a 3rd party vendor for $180 USD! Such a deal for a case that is $80. Lol.

Yea Darren, that wrap is pretty slick and the new shorter legs are much less drastic than the previous. Hope your pop rivet test works out.

them 6cm short legs I purchased first for my standard build with air cooler,
Yep them tall 10cm legs were overdoing it & would have have to make a Toliet under,
if they were 50cm tall then I would have to make a short video with sound effects of the war of the worlds.

PinkFloyd · 4 Sep 2020 at 17:21

Darren_uk said:
Just as easy with a 1m drill bit takes secs, like cutting a slice of cake

Oh this is for rebuilding it after, instead of using screws! Not for the removal

Darren_uk · 4 Sep 2020 at 20:10

PinkFloyd said:
Oh this is for rebuilding it after, instead of using screws! Not for the removal

Ah, well I will be using screws so in the future easy to swap around
the last thing I want to see is more POP Rivets by spending money

KaRaPuZ · 5 Sep 2020 at 08:06

http://imgur.com/gallery/gAv77B8
Some more pic. I am choosing between u12a, fuma 2, mugen 5 rev b. What is the best to fit? I want to keep bottom fan to exhaust. Please advise.

McPhee · 5 Sep 2020 at 17:37

U12A doesn't fit with the glass. The other two might fit with the glass.

To guarantee the cooler will fit with the glass, you need to go a bit shorter, e.g. Arctic 33 eSports.

far from home · 5 Sep 2020 at 18:42

Darren_uk said:
Ah, well I will be using screws so in the future easy to swap around
the last thing I want to see is more POP Rivets by spending money

what's your mb?
fuma 2 fits with asus b450i and gigabyte x570i

far from home · 5 Sep 2020 at 18:44

far from home said:
what's your mb?
fuma 2 fits with asus b450i and gigabyte x570i

here is build with b450i

here with gigabyte x570i

KaRaPuZ · 5 Sep 2020 at 19:00

My case is nr200 not P and motherboard is Asus rox strix x570i

Paul M · 5 Sep 2020 at 19:10

Does anyone know how close the psu sits to the sides of the cage that hold it. I need to mount a small reservoir onto the cage and I need to make new holes to fit it and was wondering if there is a gap big enough to fit a M3 nut or screw head.

jsbombjack · 5 Sep 2020 at 19:34

There's about a 3mm (maybe 4) gap from what I can tell.

Theory is that the PSU cage can take the PSU and a drive as well, so there is a gap

SaiBork · 5 Sep 2020 at 20:13

Image curtousy of @vasher but it shows that there is a gap between PSU and the mounting. Most pictures in the topic are from the side and from those and the below, it should be able to have a screw head there.