NR200 Owner's Thread
- Thread starter McPhee
- Start date
Associate
- Joined
- 20 Aug 2020
- Posts
- 89
is there any possibility to mount a slim 120mm fan above? because the included 120mm press into my fuma 2 which creates some lag
I am really tired of this!
I am really tired of this!
Associate
- Joined
- 5 Jan 2004
- Posts
- 1,096
- Location
- Wiltshire
I would like to see thermal data from those 92mm AIO that were shown in that video
Associate
- Joined
- 5 Jan 2004
- Posts
- 1,096
- Location
- Wiltshire
What you need are clevis pins 4mm x 25mm to mount a 15mm thick fan in the roof
[not my find, it was revealed earlier in this thread by someone else.]
Last edited:
Associate
- Joined
- 20 Aug 2020
- Posts
- 89
thank you
Associate
- Joined
- 17 Aug 2020
- Posts
- 128
I was going to look into 3d printing something specific for slim fans but clevis pins seem to do the trick just fine.
Also informative video. I especially enjoy him drinking 'Gin' straight from the bottle with a straw.
Interesting results with the glass/mesh panel as well. GPU seemed to be fine...it was CPU that was hindered. Of course this is because you are starving the radiator since it was side mounted for some of the testing.
Also informative video. I especially enjoy him drinking 'Gin' straight from the bottle with a straw.
Interesting results with the glass/mesh panel as well. GPU seemed to be fine...it was CPU that was hindered. Of course this is because you are starving the radiator since it was side mounted for some of the testing.
Associate
- Joined
- 5 Jan 2004
- Posts
- 1,096
- Location
- Wiltshire
Watercooled vertical mount GPU - is this possible? I haven't seen anyone do it and can only assume it isn't possible; maybe due to vertical height / tube connection restrictions??
Anyone care to enlighten me?
Thanks
Anyone care to enlighten me?
Thanks
Hey all, I've been admiring all your builds for a while, they all look fantastic. I was wondering if anyone tried using a asrock B550M-ITX/ac in the nr200p and if there has been any incompatibility due to awkward cpu postioning as with some other mobos? thanks
@***F1ZZY*** It's possible, you would need to see how to do the termination though. Either in towards CPU or up to top of case. Problem is more where do you put the radiators. One 240 radiator on the bottom for both GPU and CPU would make it run quite warm. Also, depending on GPU length, there wont be space for pump/reservoir, so you'd need to use a cpu block with a pump in it.
I was thinking to possibly have a radiator at the top (on top of the case, with normal 25mm fans inside the case), would have course needs a bit of modding to get the holes for the tubing to go through. But this would allow a 240 at the top and bottom at proper thickness.
Top would have course be something if I were to do the TG panel. If I were to just do vented panel I'd have a 280 on the side.
I was thinking to possibly have a radiator at the top (on top of the case, with normal 25mm fans inside the case), would have course needs a bit of modding to get the holes for the tubing to go through. But this would allow a 240 at the top and bottom at proper thickness.
Top would have course be something if I were to do the TG panel. If I were to just do vented panel I'd have a 280 on the side.
Nice watercooled build with TG
https://imgur.com/a/wy0WbdV
The Reddit post with more information
https://www.reddit.com/r/sffpc/comments/irdwwu/not_another_nr200p_build/
They have 2x 240 rad, so I might do something similar
(but nicer/better tubing work)
https://imgur.com/a/wy0WbdV
The Reddit post with more information
https://www.reddit.com/r/sffpc/comments/irdwwu/not_another_nr200p_build/
They have 2x 240 rad, so I might do something similar
(but nicer/better tubing work)
Impressive getting the dual rads in there, even if one is missing a fan. Good to know it's possible without having to resort to extensive modding!
Is it just me that finds the love of matt black tubing in ITX rigs odd? Seems to be the done thing at the moment and take away from the interest in using water cooling imo!
Is it just me that finds the love of matt black tubing in ITX rigs odd? Seems to be the done thing at the moment and take away from the interest in using water cooling imo!
Cooler Master show it off with a vertical GPU on the product page. So it would be weird if it didn't work.
Associate
- Joined
- 5 Jan 2004
- Posts
- 1,096
- Location
- Wiltshire
but no top fans, sorry i didn't specify that bit
Do you need top fans with a fully water cooled system? If you do, it's going to come down to the height of the GPU. Most likely some will fit and some won't.
He's only missing a fan because he doesn't have it yet
He's waiting for it to arrive and will then add the extra fan.In regards to the black tubing, it's one of the things that looks super stupid if you ask me. If you are going for the whole tempered glass side panel and custom loop, you'd want the stuff to look good.... If you are going for the vented panel and just want good cooling, sure, matt black tubes all you want.
You'd still want to get rid of the hot air, so fans would still be preferred for the airflow. Looking at the Cooler Master promo picture front fan is blocked because of the power cables from the GPU and rear fan is blocked because of the termination. I thought this would be lower, but I guess the cards are wider than I thought. That means you really would only have the bottom radiator with its fans and nothing else. Might want to put a REALLY fat radiator then
All depends on space though, Alphacool NexXxoS XT45 would probably then only fit with thin fans, so may as well have a 30mm thick with 25mm fans. Doubt a Alphacool NexXxoS UT60 would fit
Associate
- Joined
- 17 Aug 2020
- Posts
- 128
https://www.reddit.com/r/sffpc/comm...help/?utm_medium=android_app&utm_source=share
@toge This post seems to say that the asrock has a lower cpu location similar to the asus and msi so top fan shouldn't be an issue.
Oh, I thought the comments said it would clash with the clips for the RAM? Looks like it would. I'll reread tomorrow when I'm more awake!He's only missing a fan because he doesn't have it yet
You'd still want to get rid of the hot air, so fans would still be preferred for the airflow. Looking at the Cooler Master promo picture front fan is blocked because of the power cables from the GPU and rear fan is blocked because of the termination. I thought this would be lower, but I guess the cards are wider than I thought. That means you really would only have the bottom radiator with its fans and nothing else. Might want to put a REALLY fat radiator then
All depends on space though, Alphacool NexXxoS XT45 would probably then only fit with thin fans, so may as well have a 30mm thick with 25mm fans. Doubt a Alphacool NexXxoS UT60 would fit
CM are using the rad fans for exhaust, which is probably the only way to do this. Always the option of putting slim fans between the top mesh and the frame though (discussed over past couple of pages). Could likely fit a full size fan in the front if 180 degree power adapters are used.
Apologies, you are completely right.
Which I read as....
So looks like you were more awake (or just less lazy) than me
Reddit new lined it at that point and I didn't read back the most important bit