OcUK Cinebench R15 benchmark thread

oldbanana · 18 Mar 2017 at 07:57

AMDMatt said:
R7 1700 @ 4Ghz
3200Mhz CL 14
1851 Multi Thread

What am I doing wrong ? Same setting but score is 100 points lower, could it be the windows I use ? It`s a win10 that was installed and used for months with intel 7700K

R7 1700 @ 4Ghz
Asus X370 Pro
3200Mhz CL 14
1759 Multi Thread

CEUOTC · 18 Mar 2017 at 08:54

R7 1700 @ 3.9Ghz 1.3v.
MSI Tomahawk (Bios V 1.15)
32gb of Team Group @ 2400Mhz
Multi Thread 1676

Jumper118 · 26 Mar 2017 at 23:22

Fx9590@mildly fast speed
M5a99x evo which doesnt even officially support it and they say it's rated at 140w cpu when this one was pulling 489w at the wall with a gt610, 1 ssd and a few fans in the system.
Some ram

ozzyo99 · 26 Mar 2017 at 23:59

AMDMatt said:
R7 1700 @ 4Ghz
3200Mhz CL 14
1851 Multi Thread

You using the CB performance bias @ BIOS to get that score?

LtMatt · 27 Mar 2017 at 09:14

ozzyo99 said:
You using the CB performance bias @ BIOS to get that score?

Yes the option is enabled in the CH bios.

ozzyo99 · 27 Mar 2017 at 16:50

AMDMatt said:
Yes the option is enabled in the CH bios.

You cheat you... I'll try mine later, got both of the Performance Mode/Performance Bias options enabled in that sub-section of the BIOS. Barring benching, do you also leave both off?

One of them i recall says something like "overclocks processor and ram for best performance" or something which given I was OCing anyway was liable to cause some instability.

Got mine running 3950 @ 1.35 / 3300 @ 1.4 now and pretty much leaving it be. Any higher and I seem to get HWInfo errors on Realbench, though I've always kept voltage at <1.42. 4040 will stress test fine, but gives me errors.

Just need to get chasing that 3600+ memory speed now. Any news on when we'll be able to adopt fast RAM?

LtMatt · 27 Mar 2017 at 17:02

ozzyo99 said:
You cheat you... I'll try mine later, got both of the Performance Mode/Performance Bias options enabled in that sub-section of the BIOS. Barring benching, do you also leave both off?

One of them i recall says something like "overclocks processor and ram for best performance" or something which given I was OCing anyway was liable to cause some instability.

Got mine running 3950 @ 1.35 / 3300 @ 1.4 now and pretty much leaving it be. Any higher and I seem to get HWInfo errors on Realbench, though I've always kept voltage at <1.42. 4040 will stress test fine, but gives me errors.

Just need to get chasing that 3600+ memory speed now. Any news on when we'll be able to adopt fast RAM?

I've only used it when running CB to be honest, doubt it has any relevance to other games or apps.

Jumper118 · 27 Mar 2017 at 20:44

just another 2ghz and i'd smoke those ryzen chips

large.58d96a9cea541_FX9590@5.973ghzR15single144.jpg.a077302c3484abb8ac82bc52639dd33d.jpg

ozzyo99 · 27 Mar 2017 at 21:42

AMDMatt said:
I've only used it when running CB to be honest, doubt it has any relevance to other games or apps.

I could move it up some more, but not stable at 4050 when I had it there before, 8 mins of RB and death. On the other hand, left my mem on Auto after I reset my CMOS and those timings... meh! Will reboot and retry.

1807 @ CAS 15/36 so memory timings make very little difference at all.

Nickolp1974 · 27 Mar 2017 at 22:33

AMDMatt said:
I've only used it when running CB to be honest, doubt it has any relevance to other games or apps.

Also affects 3Dmark but you wont get a valid score so i believe, stop cheating Matt and do it right

LtMatt · 28 Mar 2017 at 10:18

Nickolp1974 said:
Also affects 3Dmark but you wont get a valid score so i believe, stop cheating Matt and do it right

The option is there in the bios, may as well use it.

FlanK3r · 24 Apr 2017 at 14:31

Jumper118 said:
just another 2ghz and i'd smoke those ryzen chips

wow, how do you cool it?

PS:Im now at 1851 points with Ryzen 1800X, 4150 MHz seems unstable to finish the render

Jumper118 · 24 Apr 2017 at 14:42

FlanK3r said:
wow, how do you cool it?

PS:Im now at 1851 points with Ryzen 1800X, 4150 MHz seems unstable to finish the render

Rotary single stage phase. Rated for - 50c at 400w load and idles at - 62c

1851 seems low with 1800x if you are running fast ram. I have seen screen of 1912 at just over 4ghz by Dancop.

FlanK3r · 24 Apr 2017 at 14:45

My RAM are Hynix AFR, so they are wroking around the 2666 MHz 14-18-18...Thats could be the reason.

FlanK3r · 24 Apr 2017 at 20:28

4150 Mhz will be hard...AIO cooling

jbh110tdi · 25 Apr 2017 at 02:04

not to bad for an old 4790k I think.. it was at 4.8Ghz with 1.26Vcore. failed on a stress test after 45 minutes though.. tad more Vcore and ill try again.

Jumper118 · 25 Apr 2017 at 08:18

FlanK3r said:
My RAM are Hynix AFR, so they are wroking around the 2666 MHz 14-18-18...Thats could be the reason.

Yeah you need b die. I ran e die at 2400c12 at 4.091ghz and got 1872cb so I am sure it's the ram.

FlanK3r · 27 Apr 2017 at 08:25

I see your rig, "unlocked to 8 cores" How to do?

Yes, second change are my E-die, these RAM I will use this weekend at LN2 and will see it

Jumper118 · 27 Apr 2017 at 19:25

FlanK3r said:
I see your rig, "unlocked to 8 cores" How to do?

Yes, second change are my E-die, these RAM I will use this weekend at LN2 and will see it

its just my dreams atm

i am running ln2 this weekend on a hero as well

with 1800X and 1500X also got my b die as well.

here is stock fx8350 cooler score on 1500X+b die at 3200c14 on asus prome x370 pro which has come back from rma again

http://hwbot.org/hardware/processor/ryzen_5_1500x/

FlanK3r · 28 Apr 2017 at 08:34

nice, can I ask you, what exactly DRAM kit do you have? Im thinking about some "cheap" and good B-die for Ryzen/Kabylake. Thank you.