^^ Done and good to see 
-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
**Official 3D Mark 11 scores**
- Thread starter Gregster
- Start date
^^ 
Added your scores and personally I feel that 690 score (all of them in fact) are superb. Look back at the old 590's scaling and you will see what I mean. The Mars cards were 2 full 580 GPU's on 1 PCB and look at the price of those.
Added your scores and personally I feel that 690 score (all of them in fact) are superb. Look back at the old 590's scaling and you will see what I mean. The Mars cards were 2 full 580 GPU's on 1 PCB and look at the price of those.
cheers 
Sure go for it, thanks
Added and thanks for submitting. Only the second 560TI we have so good to see them
4976 on the 560TI Hawk card (I looked about for average scores) and this is classed as a very high score. I am only using the GPU scores for comparison though Neil. You can maybe push yours past that but if it is playing games just fine, I wouldn't.
I will not be allowing any scores that have voltage over 1.2120V for a 680. Sorry, I should have said this in the rules at the start
When do you get your EVbot? and do you need to keep them connected or can you adjust 1 and remove, goto the next etc etc?
I am looking forward to seeing what the classys can pump out. I would imagine temps being the biggest draw back or do they remain pretty cool still in Tri SLI?
Very good temps for 3 cards
I found that by putting my highest clocking card in the top slot, it improved my SLI scores by a fair amount. I didn't know if this was just luck or it had some bearing... I get my other LTG tomorrow, so will do some testing once my rig is all set up.
Added your score Eva and it does look low on the GPU side of things. Kaapstad is your man for overclocking the 690. I use MSI Afterburner or EVGA Precison X. They are essentialy the same programs, just with different lay outs. I am not sure if when you overclock the core, it does both but I imagine it doesn't and you will need to do each GPU seperately.
1. Start with pushing the power limit to the far right.
2. slide the core clock to about +50
3. Slide the Mem to about +300
4. stick the fans at max
5. Apply
6. Repeat for the next GPU (if needed)
Run 3Dmark11. If no crashing or the driver has stopped responding error, add 10 to the core clock for each and add 50 to the mem clocks of each. If you start seeing pretty lights flashing on the screen when you run 3Dmark11, back off the memory and goto the last run that didn't give the flashing. Then only work on the core clocks.
It can be tiresome but this is a way to find out if you got lucky in the chip lottery or not
Hope this helps.
1. Start with pushing the power limit to the far right.
2. slide the core clock to about +50
3. Slide the Mem to about +300
4. stick the fans at max
5. Apply
6. Repeat for the next GPU (if needed)
Run 3Dmark11. If no crashing or the driver has stopped responding error, add 10 to the core clock for each and add 50 to the mem clocks of each. If you start seeing pretty lights flashing on the screen when you run 3Dmark11, back off the memory and goto the last run that didn't give the flashing. Then only work on the core clocks.
It can be tiresome but this is a way to find out if you got lucky in the chip lottery or not
Hope this helps.
Hmmm. I was going to use Prime to stable test my chip?
Nice ~300 more than last time, so it made a big difference swapping over GPU's...Weird huh?
~300 more than last time, so it made a big difference swapping over GPU's...Weird huh?
Get that chip to 5Ghz
I take it all went well?
PS sort your sig out
Water cooling went well but every time I try for an overclock on the cpu, I lose my SSD (boot drive). I have no idea what is going on
It doesn't show up in the boot options 
3 HDD's and 1 SSD. With no overclocking, everything works well. As soon as I try an overclock, the SSD is gone
This might be worth posting in motherboards and get 8Pack involved
as he knows almost everything about ASUS mobo's.
Was going to say try without HDD's connected to see if that helps
I did and it didn't
I will post in the motherboards section as I am completely stumped.
I did reset the bios and I did have a play with the SSD/HDD's but I think I was so fed up after getting everything all set up nice, I couldn't be bothered to mess about too much. I will go down to 1 SSD and 1 HDD tomorrow after work and see if that helps.
Anyways, a quick play on my LTG's and pleased with the first oc.
http://www.3dmark.com/3dm11/4573329
Plenty more in the tank
Last edited: