**Official 3DMark 'Fire Strike' Leaderboard**

[Silent_Scone]

Can't remember I'll have a look later all I did was up the multiplier and left the rest on mb default

On my 5930k I could only get 4.4 and that was with 1.350v

It's potentially quite a nice one if that's all you've changed

4.4 @ 1.35v is pretty weak indeed

 

[Gregster]

Guys, I have decided to take all the 5960X scores out, as it isn't fair on the others. I am sure you all understand

 

[Silent_Scone]

Yeah nice one, and AMD Matt's rig is power efficient

 

[Gregster]

pfffft, not one bite

 

[nails666]

Hehe, everyone is too busy trying to work out if they can afford an 8Pack action figure or toaster instead

 

[mac40]

Activated the not often used 5.0ghz profile on my 2700k.

I think my card has reached it's max without adding some voltage.
Any more on the core causes display driver to bork.
So using Evga SC bios with +147 on core , 500 on memory
TitanX 1463/8002 score 16515, gfx 20927, physics 12644, combined 7785.

http://www.3dmark.com/3dm/6468172

 

[Gregster]

Nice Mac and updated

 

[savagesam117]

Everytime i run a benchmark i get "Time measuring inaccurate. Results are invalid." How on earth do i get rid of this? I've never done anything to the program other than install the demo on steam!

I want to try and break the 100, not that it will happen! I think my CPU is holding me back!

Spoiler

EDIT: Found the answer, usually down to it being unstable, i should probably watch it for artifacts!

 

[Gregster]

Try giving a little more on the CPU core (not much) I had that a couple of times when my CPU wasn't stable.

 

[savagesam117]

I have upped it by .05 and still getting it. there's no way my CPU overclock isn't stable.

I've had scores before on this exact set up, nothing has changed and they were valid results.

I'll try reinstalling it

 

[savagesam117]

I realised what i was doing wrong, skipping the really long demo bit at the start! Finally got one, could probably go further and the CPU will but not on this cooler

4690k @ 4.6 on air.
290x (1180/1640) on air.

10868 - http://www.3dmark.com/3dm/6473468

Pretty terrible compared to your Titan X scores!

 

[Gregster]

I realised what i was doing wrong, skipping the really long demo bit at the start! Finally got one, could probably go further and the CPU will but not on this cooler

4690k @ 4.6 on air.
290x (1180/1640) on air.

10868 - http://www.3dmark.com/3dm/6473468

Pretty terrible compared to your Titan X scores!

Not terrible and a decent score. It is all about what keeps you happily gaming and that's all that counts

 

[savagesam117]

Not terrible and a decent score. It is all about what keeps you happily gaming and that's all that counts

This is very true. It is more than enough for what i use it for but it's still not enough though

 

[Silent_Scone]

Silent Scone--- (water)[email protected] --(water)1x TITAN X@ 1257(base)/ 2000 --- 19121

http://www.3dmark.com/3dm/6477102

Just to get me above Kaap, need to sort out my bench profile as had C-states enabled which seems to affect physics. Cache at 4.4 for that run.

 

[Gregster]

Nicely done and added

 

[Gregster]

http://www.3dmark.com/3dm/6482675

3930K @ 4.625 (water) - Titan X @ 1418/4010 (air)

 

[Dimi]

http://www.3dmark.com/3dm/6486558

Is that a good score for a stock 4690k & KFA2 GeForce GTX 970 OC Silent "Infin8 Black Edition"?

 

[passey89]

managed to get a G1 modded bios onto my 980 last night 140% power limit & +100mV so new tests and a bit better score. Maxed the card now artifacts if i up it any higher

Score 13,469
Graphics 16,370
Physics 11,861
Combined 6,337

CPU 4.4ghz
GPU 1621 boost core, 8,002mhz Memory

http://www.3dmark.com/3dm/6491984

Spoiler

 

[tipes]

this card is nuts!!!!

http://www.3dmark.com/fs/4510523

5960x @ 4.4Ghz
Titan x - drowned under water
core 1460
mem 1880
tdp 111.6%

Still not touched voltage or bios
This card just goes on, and on

Mark

 

[africanos23]

this card is nuts!!!!

http://www.3dmark.com/fs/4496428

5960x @ 4.4Ghz
Titan x - drowned
core 1405
mem 1845
tdp 111.6%

Still not touched voltage or bios
This card just goes on, and on

Mark

Is there a reason your not running mem at +500 ?