Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
hi guys what is average idle temp for these cards?
can some one give me the rough settings for the ati over ride on the CCC for the clock and memory ?
My is sitting at 35-40 idle is this normal ?
Also has anyone got the W7 Rivatuner sidebar gadget working with this card >?
cheers ant
your idle temps look fine, try the overdrive for yourself as everyones is different, hit the auto tune and go and have a bath or something while you wait, and to the last one i have no idea
(just the crappy MS ones) ... so I ran the chipset installer again but this time with the "-OVERALL"
hi guys what is average idle temp for these cards?
can some one give me the rough settings for the ati over ride on the CCC for the clock and memory ?
My is sitting at 35-40 idle is this normal ?
Also has anyone got the W7 Rivatuner sidebar gadget working with this card >?
cheers ant
how do you get to this mate, as i checked my device manager and see the same as you did (ms outdated drivers everywhere).
Mine crashes after each round of MW2 anyone else get something similar or know a fix?
I'll stick some pics up in a min, its lowered my Load temps![]()
I removed both coolers this morning, cleaned.. and reseated with AS5.
The Stock Asus stuff is like toothpaste, but thicker.. it was also over some of the chips next to the core as there was far too much.
I'll stick some pics up in a min, its lowered my Load temps![]()
This was the first thing i did with mine as soon as i got it. The stuff Asus uses is terrible and very poorly applied. Replaced it with MX-2 and removed the black plastic shroud from the egg cooler too. Looks better to me. Temps max out at 62 degrees with the fan hitting a max of 34%. Made a heatsink for the VRM's out of an old Pentium heatsink. People say the VRM's don't get very warm but i have a temp sensor on the heatsink and it sits around 55 degrees under load so the VRM's themselves must be a bit warmer. My card is only at stock at the moment as well.
I had this problem, set the textures to auto, that worked for me, but I was getting a memory error message.
Have you checked the system error logs? By going to event viewer?
nope whats that?