Only MAJOR overclockers need apply - survey!

Hi all Im new here. Just came here coz Cather posted this in a ocau channel.

My O/C:
XP1800+ DLT3C

Overclocked Specs:

FSB: 235mhz

CPU: 2480mhz (Using 225x11)

1x512 Kingston HyperX BH5 RAM.
Abit AN7 with enduracell's 16de8cpc1t modded BIOS.

Other specs and info are in the screenies below.

CPU 235x10.5 Stable

CPU 225x11 Stable

It is now just folding away happily at 2480mhz. Dont need the 235FSB so I fold at 225x11.
 
2700MB.JPG
 
Im at 2.5 now, my ide controller doesnt seem to like going any higher :confused: Ill have to get an IDE cont card ;)

Wheres the NF7S v-mod guide :p
 
2800.JPG


DFI Ultra Infinity 12.18 bios
2x256 Corsair XMS 3500 (BH5) 3.3v
2500XP-M (IQYHA) 1.9v
ATI 9800Pro 1.6v
2x80Gb WD JB Sata Raid0

Air Cooled SLK 900A with 90mm Vanteq Tornado on top......;)
 
oc.JPG


Model: 1700+ T'Bred"B"
Speed: 2.405Ghz
Stepping: DUT3C
Cooling: Air + 1400rpm 80mm fan
Voltage: 1.8V
FSB: 200.5
Stable: YES - Full LOAD Prime 95 + Sandra Burn-In
Details: NF7-S v2 With D23 Sub-Zero, AeroCool High-Tower, 11-3-3-2.5
Nickname: RomeoS

edit

Un-modded board, only BIOS changed ;)
 
Last edited:
Heres my minor overclock

1.jpg


2.jpg


Edit> the overclock was done on water, with neo plat mobo, and crucial ballistix, it is superpi stable with a time of 37 seconds, and prime stable.
 
Last edited:
IQYHA 0407 Athlon XP-M 2500
SP 97 + YS Tech 92mm
Kingston Hyper X 3200 2 x 256Mb
11,3,3,2.5
Vdimm 2.7
Northbridge 1.6v

Prime 95 stable 14+ hours

Also 228 FSB x 11 multi, V core 1.85v = 2515mhz, Prime 95 stable 19 hours +.
Super PI 1m = 41s


cpuz2535volt.jpg
 
Originally posted by iammed
mine aint been updated :(

2646mhz 1.888v 220x12
Click to expand...

Oops. I updated the table last thing yesterday before I went to the pub! Must have had other things on my mind. I'll update again on monday.
 
heh np mate i 4get some of us have social lives still... :D


*note* damn its annoying whatever i try i cant get it to post at 2.7ghz, even with running 2v thru it:eek:
but 2.6 is stable at 1.82v:confused:
 
Originally posted by d00dz
Hi all Im new here. Just came here coz Cather posted this in a ocau channel.

My O/C:
XP1800+ DLT3C

Overclocked Specs:

FSB: 235mhz

CPU: 2480mhz (Using 225x11)

1x512 Kingston HyperX BH5 RAM.
Abit AN7 with enduracell's 16de8cpc1t modded BIOS.

Other specs and info are in the screenies below.

CPU 235x10.5 Stable

CPU 225x11 Stable

It is now just folding away happily at 2480mhz. Dont need the 235FSB so I fold at 225x11.
Click to expand...

And also mine ^^^^^^

:confused:
 
I must have been really thirsty yesterday. I totally screwed the table up!!! Apologies all. I'll fix on monday!
 
Originally posted by =D.N.A=
I dont understand :/ what good is a overclocked pentium 4 at 5ghz if it isnt stable?
Click to expand...

I'm surprised no one has said that sooner.

It's all just a bit of fun to find the maximum of your system. if you want it stable then you can just downclock till it is.

I had 2850mhz unstable but run my PC at 2700mhz max.
 
You must log in or register to reply here.
Back
Top Bottom