Only MAJOR overclockers need apply - survey!

Here,s another one for your table weescott.
Its a 2600 xp-m.
NF-7 S, Kingston Hyper X 3200 at 2.8v,
chipset at 1.7v and mem timings of 11,3,3,2.5.

Not Prime95 stable yet but v core is 1.85v, reckon 1.875 will do it but waiting to switch to water.
Did superPI 1m but wouldnt complete the 8m.

shetlander-2650stable1.jpg
 
janesssssy-cpuid.jpg

janesssssy-cpuidmobo.jpg


temps idle 39-42
Load - 50 - 54

Danger den water cooling with maze 4 CPU block
Ehiem 1250
dd clear res
120.1 rad with 2x 120mm stealth fans

Akasa PAX power psu
clear akasa case
 
ocdb.JPG


Just improved my OC after letting the new NF7-S V2 burn in for 3 weeks

Model: 1700+ T'Bred"B"
Speed: 2.425.5Ghz
Stepping: JIUHB0308SPMW
Cooling: Air - 1400rpm 80mm fan
Voltage: 1.775V
FSB: 220.5
Stable: YES - Full LOAD Prime 95 + Sandra Burn-In
Details: NF7-S v2 With D26 Mantray, AeroCool High-Tower, 11-3-3-2.5
Nickname: RomeoS

Same as before really, just with the new board

Ignore the MBM5 readout on the +12V and the core, core over reads on MBM5 and 12V is actually 12.03 under full load - tested with a multi-meter
 
Last edited:
oc.JPG


Nothing too impressive but i'll post it anyway :)

Chip: 3.2 Northwood
Clock: 3905
FSB: 244

Cooling: SLK947 (y-tech 90mm)
Vcore: 1.625 (1.6 actual)
Stable: Can play games fine, but not prime stable

IC7 Max3, 1gb Geil 4000 (2, 4, 4, 7)
 
another one first test tonight over 2.5
surely some more left in her!!

iceax123-test.JPG


IQYHA

512 corsair value dual
NF7 V2
Akasa carnival

@1.8
 
just clocked my A64 @2.7 on water ram settings 1:1 @ 3-2-2-10,was able to run super pi 1m @ 2650mhz (super pi 34 seconds):D will post screenie later as im off to bed and cant be bothered right now :o
 
Been hard at work after flashing a modded BIOS and the result is pretty damn impressive :D

teabagger-cpuz_screen2740.jpg


IQYHA 2600+ XP-M @ 1.85
1Gb PC3200 Giel Value 11 3 3 2.5 @2.8
MSI K7N2Delta -L

Watercooled - Swiftech, 1250, Vauxhall Astra Rad.

Not even remotely stable :rolleyes: but I only have to knock the FSB down a tad and it's fine
 
Been hard at work after flashing a modded BIOS and the result is pretty damn impressive
Click to expand...
Teabagger, what Bios did you update to as ive been looking at Tictacs latest D26 Mantaray.
So far i havnt found anybody who's tried it but im gona give it a go tonight.
 
Originally posted by Shetlander
Teabagger, what Bios did you update to as ive been looking at Tictacs latest D26 Mantaray.
So far i havnt found anybody who's tried it but im gona give it a go tonight.
Click to expand...

It's a hacked 5.7 BIOS. I think it's pretty much the only one for my MSI board, not like the options you get for an NF7s with TicTac or... er... the other guy I can't remember.

It gave me an extra .05 on VCore and an extra .1 on VDimm - the standard bios would only give 2.7max VDimm which is poor beyond words :rolleyes:
 
right, i have decided that being at the bottom is not a good thing, do you think my K8VSE will do 250mhz FSB without corrupting the hard drive?
 
Originally posted by Shetlander
Weescott,

For the record my 2600 XP-M is stepping IQYHA 0426.

What does it have to do to be classed as PI stable ?
Click to expand...

Download SuperPi, run the 1mb calculation a few times. If it crashes it isn't stable. Much quicker than Prime testing.
 
didnt want to be bottom of pile here is newest attempt :)

i will get 2.6 lol

iceax123-j.JPG


12.5 * 206
@ 1.8

anyone got nesuggestions for getting any higher cant seem to raise FSB much :(

that had 2.8v throu ram aswell
 
Last edited:
Originally posted by -=BAF=-AXE
didnt want to be bottom of pile here is newest attempt :)

i will get 2.6 lol

12.5 * 206
@ 1.8

anyone got nesuggestions for getting any higher cant seem to raise FSB much :(

that had 2.8v throu ram aswell
Click to expand...

What make of RAM are you using and what are the timings ?
 
You must log in or register to reply here.
Back
Top Bottom