Soldato
Kesnel said:
I can't get it to work.Only MAJOR overclockers need apply - survey!
- Thread starter weescott
- Start date
I can't get it to work.monkeypants said:
you need to install this first....
http://www.neowin.net/forum/index.php?showtopic=308905
anymore questions, better start a thread in the windows section.
Soldato
Kesnel said:Thanks.
The skin I believe is called Ibar Glass. I'm afraid I don't have a link to hand but I'll try and dig one up for you.
Edit: Actually, it'll be easier if I put it put it up on my ftp space.
http://members.aol.com/jonpaletta/ibarglass1.2.exe
Just nicked this too, but cant seem to get it to work?
cant find the theme file, ne ideas?
Andy
Soldato
Find where you unzipped it, then run it direct from there. I think that's how I did it because it didn't show up in the Themes display properties.-=BAF=-AXE said:
Update.
Pushing harder for that first A64 place.
Memory is on RMA at the moment, so is my DDR booster, so I can't even use my benching pair of OCZs. Hopefully going to get things going futher when they're both back.
Mach II GT cooled - CABGE 0515SPMW
Pushing harder for that first A64 place.
Memory is on RMA at the moment, so is my DDR booster, so I can't even use my benching pair of OCZs
. Hopefully going to get things going futher when they're both back.
Mach II GT cooled - CABGE 0515SPMW
Last edited:
Permabanned
for a 3000+ that's mighty good. A guy at XS got a 100% overclock, but it was stable to around 3400, with something like 1.6v vcore.
Soldato
Its just occured to me i never got my top result up
Not bad for an old winny
Not bad for an old winny
Soldato
Associate
This is on an AN7 with special bios; fsb only go to 225 at a push with pc 3700 
Its a desktop Barton xp2500+ on a pathetic core stepping. Could push the vcore higher but on air and without a spare cpu didnt want to push it.
Its a desktop Barton xp2500+ on a pathetic core stepping. Could push the vcore higher but on air and without a spare cpu didnt want to push it.
Last edited:
i feel like such a fraud posting in this thread when overclocking is as easy is this.... 
pentium m 740
asus p4c800e deluxe / ct479 adapter
2x512mb geil value (2.5-3-3-6)
stock 133x13=1729
overclocked 210x13=2730
which is a 1001mhz or ~57%. so i think that qualifies.
pentium m 740
asus p4c800e deluxe / ct479 adapter
2x512mb geil value (2.5-3-3-6)
stock 133x13=1729
overclocked 210x13=2730
which is a 1001mhz or ~57%. so i think that qualifies.
marc2003 said:i feel like such a fraud posting in this thread when overclocking is as easy is this....
pentium m 740
asus p4c800e deluxe / ct479 adapter
2x512mb geil value (2.5-3-3-6)
stock 133x13=1729
overclocked 210x13=2730
which is a 1001mhz or ~57%. so i think that qualifies.
looks a nice clock to me
have you not pushed any higher you still have lot of Vcore left 
or are you worried about high temps (on stock cooling ?)stigggeh said:looks a nice clock to me
what's the max vcore you should put through these things on the stock cooler then? i'm not *too* fussed about temps so long as it's stable...
i'm not sure what to make of the current temperature readings though. here's how the board has been reading....
same bios used throughout, the 1023.001 - idle temps
celeron 1.7@stock
cpu 22/mobo 26 <<preposterous. made a post here and it seems the board under reads by anything upto 10c. fair enough....
pm 740@210x13
cpu 32/mobo 27
is this a more accurate reading or does the dothan really idle at 10c hotter than the celeron? if so then i can take it as 42ish?
under load (s&m 1.73) i'm getting temps of 47. if i add another 10c to this, i don't want to go too much higher, do i?
marc2003 said:what's the max vcore you should put through these things on the stock cooler then? i'm not *too* fussed about temps so long as it's stable...
i'm not sure what to make of the current temperature readings though. here's how the board has been reading....
same bios used throughout, the 1023.001 - idle temps
celeron 1.7@stock
cpu 22/mobo 26 <<preposterous. made a post here and it seems the board under reads by anything upto 10c. fair enough....
pm 740@210x13
cpu 32/mobo 27
is this a more accurate reading or does the dothan really idle at 10c hotter than the celeron? if so then i can take it as 42ish?
under load (s&m 1.73) i'm getting temps of 47. if i add another 10c to this, i don't want to go too much higher, do i?
i personally think that dothan temps read higher, and i think macci on XS said they can be anywhere around what the board reads (up and down) but usually report higher than what P4s report.
yeah i went from a
p4 [email protected] + SP94 ------------- case-28----idle-25----load-40c
Dothan + ct479 stock cooler----- case-29----idle-50----load-60c
dothan @2.8 1.55v XP120------- case-30----idle 37c---- load-45
i think these processors are made to be screwed in a hot sweaty laptop, but i do know the stock fan cant really handle the dothan when you start cranking the Vcore up , how about getting another cooler on it
Last edited:
just tried 220x13, 1.55v and it wouldn't post. 215x13 got me into windows but firefox was crashing.... i guess i should drop the multiplier to find the max fsb my ram will goto, bearing in mind it's only geil value. 
apologies to weescott for the thread hijack. anymore questions i have, i'll start a new thread.
i guess i should drop the multiplier to find the max fsb my ram will goto, bearing in mind it's only geil value. apologies to weescott for the thread hijack. anymore questions i have, i'll start a new thread.