Parvum Systems Project Magnus

systemerror · 24 Feb 2014 at 01:01

One amazing creation and really hope this makes it onto the production line soon would take this case over any atx case out there at present

can't wait to see the next chapter complete.

JoeF1 · 24 Feb 2014 at 17:28

The SSD idea is great.

hawkhench · 24 Feb 2014 at 18:44

A production Parvum ATX case would get my money.

parvumsystems · 26 Feb 2014 at 10:46

nick.lidgett said:
Totes amazeballs!!!!

Thanks nick

Chandler_90 said:
This is one of the best builds I've ever seen!

I can feel myself falling for PC builds again!

Falling for PC builds is THE thing to do, glad we are helping this be a part of your life more so !

Bart_Hunt said:
I know
I meant in serial production.
I was hoping s2.0 was going to be full atx. That's what I meant

hawkhench said:
A production Parvum ATX case would get my money.

Of course we will guys don't worry. We are currently trying our best with 3 full time staff to just keep up with demand of the mATX case. ITX is basically ready and we will start to push this very soon. After that it would only be stupid not to do an ATX case. We are also very busy working on a our own fan or at least licencing a Parvum fan... very busy here.

To combat this business we are very much considering taking on another full time staff member, but of course with everything, you have to be very careful not to run before you can walk... we are very good at walking so are just being sensible.

systemerror said:
One amazing creation and really hope this makes it onto the production line soon would take this case over any atx case out there at present can't wait to see the next chapter complete.

Defiantly a huge step in our ATX case design so super glad we did it. Thanks, should have an update soon!

JoeF1 said:
The SSD idea is great.

Thanks Joe!

hawkhench · 26 Feb 2014 at 13:09

parvumsystems said:
To combat this business we are very much considering taking on another full time staff member, but of course with everything, you have to be very careful not to run before you can walk... we are very good at walking so are just being sensible.

Even better news, you all have your heads screwed on right. I'll look forward to when it arrives

parvumsystems · 1 Mar 2014 at 17:35

More Magnus

Sponsors/Support:

Going well all. Sorry updates have slowed a little, more tweaking stages at the moment.

First up was to finish the cable management, pop all these wires into the allocated holes:

Next install some MORE SSDs! Had to modify this sides top section to allow for the fittings to actually fit. Just one of them things....

Rear return tubes and all cables no complete:

We actually then went ahead and filled the loop with clear coolant. Just to double check each loop and ensure the system is running with no problems. We did not test any of the hardware from sponsors on air first (silly I know). However fortunately no issues at hand. Bios no problem and everything detected. Got some F/W stuff to sort out with the raid card as having a few issues there so will spend the next week or so bleeding the nightmare loop and running some tests with the system.

Its by no means finished cosmetically as we have quite a few external panels to cut but the wiring and loop side of the build is finished. A few teaser shots before we spoil the grand coolant colour photos and any video etc:

We will see you all VERY soon with EYE CANDY!!!!

GiraffePencils · 1 Mar 2014 at 18:29

looking good, whats the count on the fluid volume? 5-10 Litres?

CrazyArsedMonky · 1 Mar 2014 at 18:33

This.. this is just immense!! There is so much design talent in this project - and on these forums generally, so many great ideas!

o7 Parvum

colinmcr · 1 Mar 2014 at 19:27

parvumsystems said:
We will see you all VERY soon with EYE CANDY!!!!

We love a bit of Candy round here, must be all those haribos !

Seriously though your build is pure eye candy as is, its been a pleasure to see this build come along. Looking forward to the next update.

Sin_Chase · 2 Mar 2014 at 00:48

More quality work, brilliant to see!

WalderX · 2 Mar 2014 at 08:11

You just got the 1 PSU in this build yeah? Tis gonna get a workout with all that kit to power!

parvumsystems · 4 Mar 2014 at 17:46

GiraffePencils said:
looking good, whats the count on the fluid volume? 5-10 Litres?

Well 5 went in and its not full/bled yet, got a little bit to go, to be honest about 1 did get split (luckily not on any of Magnus). A good 5-6 liters full, will keep you update

CrazyArsedMonky said:
This.. this is just immense!! There is so much design talent in this project - and on these forums generally, so many great ideas!

o7 Parvum

Thanks very much. We've put a lot of time and love into this one. Just looking forward to letting some games rip at super high res on the Asus Swift!

colinmcr said:
We love a bit of Candy round here, must be all those haribos !

Seriously though your build is pure eye candy as is, its been a pleasure to see this build come along. Looking forward to the next update.

haha true, had a lot of free Haribo's with hardware! They do just the trick when you need the extra sugar boost from a hard days modding. Update soon, waiting to sort some little problems with the raid card!

Sin_Chase said:
More quality work, brilliant to see!

Thanks dude!

WalderX said:
You just got the 1 PSU in this build yeah? Tis gonna get a workout with all that kit to power!

Yeah just the single one in this. Raid card and 3 780's, should be okay! Fingers crossed anyway haha.

WalderX · 5 Mar 2014 at 07:11

parvumsystems said:
Yeah just the single one in this. Raid card and 3 780's, should be okay! Fingers crossed anyway haha.

Plus 4 SSD's, 2 pumps, overclocked CPU, mobo and a million fans! But I'm sure it will be ok, it's a 1.2 kilowatter isn't it?

dannywaugh1 · 5 Mar 2014 at 21:49

I don't know what to say about this build it that crazy that brilliant and the workmanship is beyond anything I can describe!

I cannot wait for you guys to start doing custom inlaying and etching I a pav case customised!

MonsterMoshi · 5 Mar 2014 at 22:48

This is literally insane!
Never seen anything like it
Incredible work here guys

parvumsystems · 7 Mar 2014 at 17:42

WalderX said:
Plus 4 SSD's, 2 pumps, overclocked CPU, mobo and a million fans! But I'm sure it will be ok, it's a 1.2 kilowatter isn't it?

8 SSDs, overclocked everything, 17 fans, 3 pumps, 3 mechanical drives.. oh and the raid card! Lots and lots

It's a 1.2kw yeah, only 3 780's though so should be OK to do the job. We hope

dannywaugh1 said:
I don't know what to say about this build it that crazy that brilliant and the workmanship is beyond anything I can describe!

I cannot wait for you guys to start doing custom inlaying and etching I a pav case customised!

Thank you very much dude, means a lot! We are really trying to push it here. Not many case companies that'll show you the case being made (probably because its being made a million miles away)..

We will open up some custom work in small sections. Perhaps taking a certain amount of jobs each month etc as to not take on too much work. Watch this space of course

MonsterMoshi said:
This is literally insane!
Never seen anything like it
Incredible work here guys

Thanks Moshi!

Mads1 · 7 Mar 2014 at 22:39

nice to have seen the build up close today, be great when its finished, m-atx put together now, just waiting for me parts, let me know how you get on with the tint window so i can come and get one, great service from a great company :-)

GiraffePencils · 7 Mar 2014 at 23:03

parvumsystems said:
We will open up some custom work in small sections. Perhaps taking a certain amount of jobs each month etc as to not take on too much work. Watch this space of course

I'm planning to keep my eyes peeled

But as my hands are itching if you're taking custom orders by the time my funds permit I'll be taking a hacksaw to my current case and making the poor thing a Frankenstein to hold the hardware until you are ready

Hope your case makes it on the road and I can see the beast with my own eyes. Keep the updates flowing

deFiniLoGy · 9 Mar 2014 at 07:52

ah dear...

If you put the case onto the market everyone will be happy

parvumsystems · 10 Mar 2014 at 09:53

paulm71 said:
nice to have seen the build up close today, be great when its finished, m-atx put together now, just waiting for me parts, let me know how you get on with the tint window so i can come and get one, great service from a great company

Great to have you stop by. Will be sure to keep you posted. We are away for a little this week but will be onto it at the end of the week

,

Looking forward to doing the fan controller with you.

GiraffePencils said:
I'm planning to keep my eyes peeled
But as my hands are itching if you're taking custom orders by the time my funds permit I'll be taking a hacksaw to my current case and making the poor thing a Frankenstein to hold the hardware until you are ready

Hope your case makes it on the road and I can see the beast with my own eyes. Keep the updates flowing

It WILL be at iSeries. In fact it almost has to be! It will be on the Asus stall with some cool demos and with us in the evenings. Can't wait!

deFiniLoGy said:
ah dear...
If you put the case onto the market everyone will be happy

We are but doing our best! The range will grow! Fans next

To update anyone following:

We are waiting on LSI at this stage. Had some firmware problems. Until we hear back from them the build is on hold.

We are flying to Germany for CeBit tonight to land back Thursday. If anyone wants to say hello we will be at the event Tuesday and Wednesday.

Updates soon we promise