no luck. Ive tried just the cd rom drive by itself i have no idea why it will not turn on. I do have some cables left over. But the CDrom cannot fit anything more on it anyways and the HDD has some 8pin slot that i dont have any cable for
The setup is simply HDD to Motherbord via a red cable
CDROM to Motherboard via an identicle red cable
And then the 3 headed cable that goes from the PSU to the HDD and the CDROM the connection to the devices via that cable is very soft its not exactly what i would call a snap into place it more just sits there like its hardly even on at all.
Ive tried pushing it down onto the hdd harder and any more force would be unresonable It only goes a few mm onto the plug.
All seems to be working fine fingers crossed. However i have a slight concern. The i3 2120 sits at about 34 degrees C when the pc loads up into windows and sits there, however after an hour or so of BF3 on high settings it can get up to 67 degrees.
Is this a normal temp under full load with the stock cooler? or should i be concerned.
Will take some pics when i can of the build.
thanks for help.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.