Project - Air Cube v2

Ok, just taken the night shots but I'm unsure if I like them or not whereas the single I thought it looked fine straight away, wow I just don't know :confused:, but can picture them looking good once painted.

doublednight1.jpg


doublednight2.jpg


doublednight3.jpg


doublednight4.jpg


doublednight5.jpg


doublednight6.jpg
 
:D Thanks TB & Paul, the case is almost done, once I have these panels made, painted & attached I'll be contacting the guy who wants to feature it in a mag to let him know it's finished :), I just couldn't let it be featured knowing it could have been improved a bit here & there :D.

I admit the double layer looked good, but it disguised the pattern too much so since I'm yet to do the extra layer panels I thought I'd do a pattern that flows with the original ones, they could go above or below the originals, whichever looks best & sticking with the colours of the fans frame & blades, also decided to remake 1 of the top panels as it weren't as good as the other.

So I have 5 panels to cut & sand, if I push myself I'll have the panels cut today & the sanding done tomorrow, but having said that the new patterns are less complex so should be a little easier.

Here is the side & top panel laid over what I'm going to do.

2ndlayer.jpg
 
Wowee got them all cut out, got really stuck in again so just need sanding smooth now :D.
Started about 3pm finished at 7pm, not bad for 5 panels :).

2ndlayergrillsrough.jpg


Ooooh, just noticed project log section, nice :).
 
Last edited:
Hehe Thanks timciren :).

Here we go :D.

Overslept until 3pm lol must have been knackered from all the cutting, had a few cappuccinos & started sanding at 4pm, had 2 smokie breaks & finished at 11pm, wolfed down a bowl of broccoli & beef pasta then had to use the flash to take the sanded pics.
Need to put an order in for the paint all the local auto shops only seem to stock 1 of each colour & often don't have what I want.

Once I have these painted I have a mammoth task of cleaning the garage & my dads bikes lol :D.

The reason for the black panels is I searched around the house & found some 1mm thick black anodised sheet I had left over from the prototype air cube.

sandedlayergrills0.jpg


sandedlayergrills1.jpg
 
3PM! Lazy bum :D

They're looking good.

:D LOL I know & thanks :).

Done a test fit for while I wait for the paint, should look sweet once painted ice blue & dark steel blue, both metallics.

tempinstall2.jpg


tempinstall1.jpg


tempinstall0.jpg


Good thing I did a test fit, a little more needs filing down on the inside edges of the side grills.
 
@Deschutes No need to say sorry m8, guess it's a bit of a marmite style :D, the mesh was ok but visually couldn't see the insides very well & the panels of mesh only just covered the window holes so when viewed at cirtain angles I could see gaps so it was probably that what driven me to do the layer grills, should look much better once painted.

@OCD-OC The skill comes purely from watching tutorials on how to use it, inspiration from other modders showing what they can do with a dremel & plenty of practice & the will to try complex cuts :), Bill Owen said in 1 of his tutorials if you can master doing circles with the dremel then you should be able to cut whatever you want & I agree. I was shabby with a dremel at first ;), anyone could get as good or far better than what I have done with practice so don't doubt yourself :), but always wear safety glasses when doing dremel work.

Got the excess borders filed & sanded down, so just waiting for the paint to arrive now :cool:.
 
Last edited:
Just a status update this one.

Just a status update this one.

Got the paint yesterday, the layer panels were already prepped so primed, sanded, coloured, cleared them all, went to install them today & had a couple of face palm moments :facepalm::D.

I put the side panels in the wrong way round, but carried on taking pictures then thought midway through taking the pics all the effort I've put into this & I'm doing that lol so took them off & put them on the right way & heres the other face palm moment, I painted the wrong sides of the secondry layer on the sides so the patterns didn't line up as planned, very glad I ordered 2 of each colour, whipped them off & painted the other sides, should be good to go tomorrow lol :D.

The difference in the 2 shades of blue isn't much to be honest but still looks good, I think the only way I'm going to get pictures done to do it justice is if I make a cheapo photo boothe, the light in my room makes my photography & the case look shoddy & with it being finished I want to get as good of quality pictures as possible with my camera to finish this log off :).

Bit the bullet & just ordered the ingredients for a cheapo makeshift photo boothe.
3 light fittings which can clip onto things
3 daylight bulbs
a clothes line
a plain white shower curtain
a big piece of black fabric & white fabric to see which is best looking.
£46 all ordered so should hopefully have some sweet finished pictures incoming by next week :).
I could post some pictures tomorrow but I'd rather post good quality pics once I have the boothe made ;), it's about time I upped the photo quality :D.
 
Arrrrgh :D, sorry again again & again, need to bump so it goes to a new page for some finished pics 25 image limit & have 49 to show, please don't bann me, switch to a new page now or I'll just split the post over 2 pages.
 
Sorry about the bumping to try & get it on a new page, just didn't want it on 2 pages :o.

LOL, not a lot goes to plan & waiting for the bits for a photo boothe is no exception :D.

I remembered I had a couple of sheets of white foamboard that I originally bought to make a big photo boothe but didn't end up making it. Did want to take the case outside but were no sign of at least dry weather so I experimented & got a bright idea of using the light coming into my room as good as possible combined with my kodak easyshare z950 & a tripod.

So the bits I ordered for making a photo boothe won't go to waste, not at all, it'll all be perfect for any future project logs ;).

Placed a sheet up against the north faced wall so it could catch the light coming from the south, taped it to furniture, placed the other sheet on the floor, placed a lazy susan on it so I can easily swivel it around to catch all angles & took 151 pictures lol :D, a lot to cherry pick in that lot, got down to 49 cropped pics, should probably do some more picking to slim the post down but no I'll just post them, sorry if it's too many but wanted the pics to capture what it really looks like.

On with the daylight lazy susan foamboard enhanced 100% finished pics of the Air Cube woooo.

AirCubev2Finished0.jpg


AirCubev2Finished1.jpg


AirCubev2Finished2.jpg


AirCubev2Finished3.jpg


AirCubev2Finished4.jpg


AirCubev2Finished5.jpg


AirCubev2Finished6.jpg


AirCubev2Finished7.jpg


AirCubev2Finished8.jpg


AirCubev2Finished9.jpg


AirCubev2Finished10.jpg


AirCubev2Finished11.jpg


AirCubev2Finished12.jpg


AirCubev2Finished13.jpg


AirCubev2Finished14.jpg


AirCubev2Finished15.jpg


AirCubev2Finished16.jpg


AirCubev2Finished17.jpg


AirCubev2Finished18.jpg


AirCubev2Finished19.jpg


AirCubev2Finished20.jpg


AirCubev2Finished21.jpg


AirCubev2Finished22.jpg


AirCubev2Finished23.jpg


AirCubev2Finished24.jpg


AirCubev2Finished25.jpg
 
Continued...

AirCubev2Finished26.jpg


AirCubev2Finished27.jpg


AirCubev2Finished28.jpg


AirCubev2Finished29.jpg


AirCubev2Finished30.jpg


AirCubev2Finished31.jpg


AirCubev2Finished32.jpg


AirCubev2Finished33.jpg


AirCubev2Finished34.jpg


AirCubev2Finished35.jpg


AirCubev2Finished36.jpg


AirCubev2Finished37.jpg


AirCubev2Finished38.jpg


AirCubev2Finished39.jpg


AirCubev2Finished40.jpg


AirCubev2Finished41.jpg


AirCubev2Finished42.jpg


AirCubev2Finished43.jpg


AirCubev2Finished44.jpg


AirCubev2Finished45.jpg


AirCubev2Finished46.jpg


AirCubev2Finished47.jpg


And finally the photo boothe lol :D & the mess I need to tidy & clean :D.

AirCubev2Finished48.jpg


Massive thank you to all who tuned in to view & comment, happy modding all, I have no idea what I'll make next but I'm sure an idea will pop into my head in time :):up:.

Ahhh it all fit into the 1 page :cool:.
 
Last edited:
Back
Top Bottom