going to a friends house to test my CPU + RAM, and if both work fine then RMA of the motherboard....once the motherboard is in RMA processe time to braid the PSU!
Project: Clean
- Thread starter domthecondom
- Start date
went to friends house and both my CPU and ram work fine in his machine....RMA time for the Mobo!
yay
yay
Sorry guys but project went on hold for a little due to finance problems but has picked up again
@ Aleks the PSU was sent of to a paint place (can't mention it here) and it had to be wet sprayed due to the texture.
this bad boy had been ordered and is currently been sprayed blue
@ Aleks the PSU was sent of to a paint place (can't mention it here) and it had to be wet sprayed due to the texture.
this bad boy had been ordered and is currently been sprayed blue
well moving house soon and will have a garage...only thing i am dreading is doing more braiding 
great soundcard that,
really happy with mine.
looking forward to seeing this one pick up again
I hope so man
yeah lets hope it will pick up.Everybody thanks for your comments.
@ perry081064.....well i ain't happy with my sleaving...could be bettter
@mrdbristol hehe following me on three forums now
Thumb Screws have been sent to be anodiozed and fan grills to be sprayed
Yeah, the problem was I had a dead ram slot and thanks to OCUK for a super quick RMA
@G-dubz Thanks Man
Indeed I can't spend all money on Computer.@Tiamat21. I had the problem with 10mm braid. It didn't wane go over
so I used 11mm I think not sure anymore
Nope this is all still with Tom in bridgend waiting for him to spray few things
Little update with no pictures.
The Thumbscrews can not be anodized, so will need to order some Lian Li blue thumbscrews.
The only thing I dislike about Lian Li is that they have there own threading. Which SUCKS! haha
Hopefully I should receive my Soundcard VERY soon
Ordering some fans this month and an SSD. All that will be left is MORE MORE MORE braiding and the watercooling.
NOT LONG LEFT
*EDIT*
My Sound card has arrived and looks pretty darn good. I will take some photos later.
The Thumbscrews can not be anodized
, so will need to order some Lian Li blue thumbscrews. The only thing I dislike about Lian Li is that they have there own threading. Which SUCKS! haha
Hopefully I should receive my Soundcard VERY soon
Ordering some fans this month and an SSD. All that will be left is MORE MORE MORE braiding and the watercooling.
NOT LONG LEFT
*EDIT*
My Sound card has arrived and looks pretty darn good
. I will take some photos later.
Last edited:
*EDIT* V2
Ok my Xonar D2X has arrived with a Custom Paint Job .
and Just got my Intel SSD 160GB G2
Very nice.
Now I am waiting for a Mr Tom in wales to pain the 3.5 to 2.5 HDD converter white.
Ok my Xonar D2X has arrived
with a Custom Paint Job .
and Just got my Intel SSD 160GB G2
Very nice.
Now I am waiting for a Mr Tom in wales to pain the 3.5 to 2.5 HDD converter white
.
Last edited:
Just edited the above post. *didn't realise it wouldn't update it and put thread to top *
*
Got another package today
5 Enermax Clusters second hand of the MM.
Need 3 more anybody got any for sell?
They are VERY nice fans yummy
The white light should go well inside my case there is a switch on the fans to turn the LED off nice touch!
Now is the question, do i leave the white braid on? or do i use the blue and white braid?
hmpf what do you lot think I should do?
5 Enermax Clusters second hand of the MM.
Need 3 more anybody got any for sell?
They are VERY nice fans yummy
The white light should go well inside my case
there is a switch on the fans to turn the LED off nice touch!
Now is the question, do i leave the white braid on? or do i use the blue and white braid?
hmpf what do you lot think I should do?
That is the problem, i don't know HOW visible they will be yet!
How about you sell me 3 w3bbo? 
Plus nice PSU i think you stole my idea
Plus nice PSU i think you stole my idea
Hehe cheers 
. As soon as I saw the thread for seeling clusters I HAD TO HAVE THEM .
Anyway tiny update.
Managed to do a little bit of braiding on the Fan controller before I ran out of heatshrink
Here is the fan controller out for the first time since Tom sent me the case
By the way this is the Nesteq FanMax 8-Channel Fan Controller obviously coated white.
First thing I did, I took the cables off.
Then had to get the pins out of the connector (was very easy)
Got one channel of the Fan controller done. but ran out of Heatshrink, will order more.
So what do you guys think about the Fans? Should I braid them or not?
. As soon as I saw the thread for seeling clusters I HAD TO HAVE THEM .Anyway tiny update.
Managed to do a little bit of braiding on the Fan controller before I ran out of heatshrink
Here is the fan controller out for the first time since Tom sent me the case
By the way this is the Nesteq FanMax 8-Channel Fan Controller obviously coated white.
First thing I did, I took the cables off.
Then had to get the pins out of the connector (was very easy)
Got one channel of the Fan controller done. but ran out of Heatshrink, will order more.
So what do you guys think about the Fans? Should I braid them or not?
I will leave fans as they are.
Thanks Rjkoneil...problem is when you plug it into the PCI-E its upside down
Thanks Rjkoneil...problem is when you plug it into the PCI-E its upside down
Thank you all you will need to wait for next payday for new pictures
you will need to wait for next payday for new pictures
Last edited:
bah Sorry everyone. Project is on Hold until Pay day January 2011 .
Various stuff has happened during the last 2 months.
this will get back soon
.Various stuff has happened during the last 2 months.
this will get back soon
Ok Finally bought something new and bought some more heatshrink will get some cables covered tomorrow I guess i should really buy a backplate for it for the waterblock and how do I flush it out properley?
and bought some more heatshrink will get some cables covered tomorrow I guess i should really buy a backplate for it for the waterblock and how do I flush it out properley?
I swear your soundcard is differen't to mine