PROJECT: FLAME ORANGE
- Thread starter Ace Modder
- Start date
- Joined
- 8 Sep 2003
- Posts
- 23,155
- Location
- Was 150 yds from OCUK - now 0.5 mile; they moved
Right DSLR is being fully charged now 
Associate
- Joined
- 6 Mar 2013
- Posts
- 444
Last edited:
- Joined
- 8 Sep 2003
- Posts
- 23,155
- Location
- Was 150 yds from OCUK - now 0.5 mile; they moved
Well I have spoken to DemciFlex and they are making me some custom dust filters for this, looking forward to receiving them next week
This is going to be very orange by the time it is finished. Always nice to see a colour different from usual blue, black or red.
No not Fanta, Ace Modder obviously has an orange obsession but I am torn between whether he has been Tango'd or whether he is an Umpa Lumpa
No not Fanta, Ace Modder obviously has an orange obsession but I am torn between whether he has been Tango'd or whether he is an Umpa Lumpa
- Joined
- 8 Sep 2003
- Posts
- 23,155
- Location
- Was 150 yds from OCUK - now 0.5 mile; they moved
Noiseblocker have kindly agreed to supply me with 20 fans which I intend to paint orange and laquer. The fan of choice is the B12-3.
OH LAWL
- Joined
- 8 Sep 2003
- Posts
- 23,155
- Location
- Was 150 yds from OCUK - now 0.5 mile; they moved
But Antecs fans tend to break if you remove the fins as they are not meant to be removed! I intend to paint this orange. The noiseblockers are easy to remove.
- Joined
- 8 Sep 2003
- Posts
- 23,155
- Location
- Was 150 yds from OCUK - now 0.5 mile; they moved
See here RJK
- Joined
- 8 Sep 2003
- Posts
- 23,155
- Location
- Was 150 yds from OCUK - now 0.5 mile; they moved
I'm not here to give a biased opinion about a personal build I'm doing. I have certain requirements etc, for example my case choice is not Antec, but I hold my hands up and say that Antec don't have a case which fits my requirements for this specialised project.
Same with the fans - I ended up breaking 3 fans trying to remove the fins from them in order to paint them. And lets be honest how many people actually paint fan blades? A small specialised amount only.
I'm happy to admit that our fans are good, but not suitable for my needs on this occasion.
The PSU is Antec as that 100% suits my needs to a tee. OEM is Delta and they are the best of the best in OEMs. There is a reason 8pack uses Antec PSU's to smash all his world records
Same with the fans - I ended up breaking 3 fans trying to remove the fins from them in order to paint them. And lets be honest how many people actually paint fan blades? A small specialised amount only.
I'm happy to admit that our fans are good, but not suitable for my needs on this occasion.
The PSU is Antec as that 100% suits my needs to a tee. OEM is Delta and they are the best of the best in OEMs. There is a reason 8pack uses Antec PSU's to smash all his world records
Last edited:
- Joined
- 8 Sep 2003
- Posts
- 23,155
- Location
- Was 150 yds from OCUK - now 0.5 mile; they moved
Delivery has just arrived.
Fans are going to be used as general chassis fans. Orange LEDs FTW! 2 in the front, two at the rear
Fans are going to be used as general chassis fans. Orange LEDs FTW! 2 in the front, two at the rear
Last edited:
Just came across this thread, Beautiful case and a very nice build so far.
For future reference when spraying, use some Scotchbrite to flatten the paint down on all surfaces prior to the finish coat, be it Lacquer/Glaze. This helps to give you a better finish, in terms of removing imperfections and noticeably Oranagepeel.
It`s a little extra work, but well worth the effort.
For future reference when spraying, use some Scotchbrite to flatten the paint down on all surfaces prior to the finish coat, be it Lacquer/Glaze. This helps to give you a better finish, in terms of removing imperfections and noticeably Oranagepeel.
It`s a little extra work, but well worth the effort.
