Project "Paint it Black"

Looks great Kaap :)

I do agree with you on the 900D about the PSU though - I love the case myself but that is the one gripe I have with it (well, plus the fact there are no rubber grommets for the 2 holes above the motherboard), you can clearly see the cabling from the PSU due to no partition for it; but it's still a great case in my opinion.
 
PhysicsMan94 said:
Looks great Kaap :)

I do agree with you on the 900D about the PSU though - I love the case myself but that is the one gripe I have with it (well, plus the fact there are no rubber grommets for the 2 holes above the motherboard), you can clearly see the cabling from the PSU due to no partition for it; but it's still a great case in my opinion.
Click to expand...

I was looking at that on mine earlier wondering why it looked odd, there really should be rubber grommets.
 
Kaapstad said:
Corsair really need to look at the design of the 900D, with no partition for the PSU the wiring looks really bad.
Click to expand...

Agreed, generally it's a good case, but there's a few things that really annoy me about the case

Have you looked at ColdZero's site? I ordered a long mid-plate from him at the beginning of the month..

It makes such a difference to the look of the case (although I'm tempted to get a powdered coated metal one made up)
 
BattFink said:
Agreed, generally it's a good case, but there's a few things that really annoy me about the case

Have you looked at ColdZero's site? I ordered a long mid-plate from him at the beginning of the month..

It makes such a difference to the look of the case (although I'm tempted to get a powdered coated metal one made up)
Click to expand...

I have ordered a short mid plate from ColdZero. What are they made out of, is it metal or plastic.
 
Kaapstad said:
I have ordered a short mid plate from ColdZero. What are they made out of, is it metal or plastic.
Click to expand...

3mm matt black acrylic, seems sturdy enough though

I bought the long version, although I may have to cut it as I think I'm going to need to use the lower mounts for a drive cage
 
BattFink said:
3mm matt black acrylic, seems sturdy enough though

I bought the long version, although I may have to cut it as I think I'm going to need to use the lower mounts for a drive cage
Click to expand...

Thanks.

How long did it take to come through the post, was it quite quick.
 
Kaapstad said:
Thanks.

How long did it take to come through the post, was it quite quick.
Click to expand...

I ordered on the 7th January & was delivered on the 10th

This is my 900d with the long mid plate test fitted (e.g. not screwed in)

44f9c370-f09d-49a0-a0cf-f2744d2d8f3f.jpg


Have to say your build has got me wondering if I need another titan to fill the hole :)
 
Last edited:
BattFink said:
I ordered on the 7th January & was delivered on the 10th

This is my 900d with the long mid plate test fitted (e.g. not screwed in)

44f9c370-f09d-49a0-a0cf-f2744d2d8f3f.jpg


Have to say your build has got me wondering if I need another titan to fill the hole :)
Click to expand...

The mid plare does look nice.:)

Three or more Titans do look nice together.:)

g5as.jpg
 
You're using an external rad on this build right?

If so, i see that your top fans are intake? I would recommend a natural air flow (in from bottom, out at top) should help the ambient temperature inside the case.

Unless of course you keep the side panel off.


Looks great regardless :)
 
Looks awesome, that mid plate really tidies up the build quite nicely

I need to track down some extra grommets to fill in those holes by the 4 + 8 pin ATX connectors
 
Last edited:
Thanks everyone.:)

BattFink said:
Looks awesome, that mid plate really tidies up the build quite nicely

I need to track down some extra grommets to fill in those holes by the 4 + 8 pin ATX connectors
Click to expand...

If you do track some down could you post the link please. It is odd that Corsair did not include some.
 
You must log in or register to reply here.
Back
Top Bottom