Project: Temjin-M

rjkoneill said:
nice pictures, what plans do you have for the tubing layout of the new case?

TBC, i'll talk about it later once i have these retarded gfx cards sorted

is the corrosion down to the bare copper on that block?
was that the loop using pure water that caused that? you didnt use any biocide in the loop or anything did you?

Pure water and biocide and dye. Corrosion is just the black bit, can't see any copper, but wiping it doesn't help

one thing i have noticed, my TJ11 is a real hassle for cable management, looking forward to seeing how you do yours.

I couldn't care less :D
The 07 was an EXTREMELY awkward case to deal with. In mine, literally nothing would work properly. The mobo wouldn't fit properly (all 3 of them) None of the 7 gfx cards i've owned have fitted properly. With the TJ11, setting it up was a breeze! Everything fitted beautifully :D
The cables will be awkward, but i think with some extensions, will be ok.

I have a few ideas but nothing set in stone yet, either way it will be far more of a hassle than a TJ07 due to the motherboard orientation.

are you planning on doing WC through both memory sets?
ofcourse!

personally a WC block on each memory bank with and the loop going

memory>CPU>memory would look sweet.
i'm thinking memory>mobo>memory

also
please don't think I'm being harsh with my cleanups, I am the only moderator of this section so the less work for me the better.

np

Keep up the good work mate :)
Click to expand...

King Damager said:
Yeah, RJK, I thought that talking about faults with hardware was relevant to the project as it is part of the project.... It seems I misunderstood though, so sorry that I was talking about irrelevant stuff.I don't think you're being harsh, I just yeah, clearly didn't understand. So sorry.

Have you got power to the rig yet. It looks like you could do some tidying up of the loop in due course though :p
this was a quick "i need my BF3 fix now" loop :D

Are you going to mount rad in top or in bottom instead of HDD bays, pretty sure I've seen both done before.

kd
Click to expand...

rad mounting is unknown thinking of maybe getting phobya 200mm rad?!

Clee
 
cammy5477 said:
sweet jesus thats a monster chip or does that photo just make it look bigger?

absolutely huge!

although when done right watercooling ram can look nice......but its a lot of expense and hassle to go to for minimal at best gains mate...i had some ocz reaper water cooled when ddr2 was out, it cost a fortune and needed special koolance ram spliters that were from memory £25 each (2 needed to cool the 4 sticks). once there under water you cant just pull them out either it starts making things awkward if you like to keep playing....which you obviously do ;)

personally i just water cool chip and vga now...means i can still play.
just bought the same ram kit as you i think also 16gb dominators @ 1866mhz c9?
i have a airflow 2 fan and i bought the airflow pro also for a big of bling :)
Click to expand...

Well £30 for each RAM block isn't too bad. I'm doing it simply for the epic looks! nothing else!
 
Good to see you going forward Mr Cleeecooo sah will have a good read this evening, caught that about your psu darn shame ... onward and upward :D

Did you ever solve the "desk space" upgrade that you were going to do?
 
ToxicTBag said:
Good to see you going forward Mr Cleeecooo sah will have a good read this evening, caught that about your psu darn shame ... onward and upward :D

I put the PSU in the fridge and it started working again :D:p

Did you ever solve the "desk space" upgrade that you were going to do?
Click to expand...

No :(
Still need to do that, but after the aquaero, money for luxuries are tight :(

Finally got round to wiring power button up :D

Also, that pesky fan has been sorted. It was at 5,600RPM :eek:
 
Cleeecooo said:
Still need to do that, but after the aquaero, money for luxuries are tight :(
Click to expand...

must say, I installed my aquaero today. you will not be disappointed. been slowly putting bits of my system together and my aquaero sitting there in the box tempting me got too much.

the software is incredible and the whole thing allows so much customisation that you can literally fine tune each fan channel to your liking.

how do you plan on mounting your aquaero? front mount in a drive bay or elsewhere?
 
You must log in or register to reply here.
Back
Top Bottom