quick question ? !

Cob · 13 Nov 2007 at 15:05

They're options in BIOS, dude.

psychas · 13 Nov 2007 at 15:18

Cob said:
They're options in BIOS, dude.

oh kk sorry well i increased cpu voltage 1.3125 v as i can increase buy 0.0125v but i did see it change in cpu-z and pc probe actually it decreased...

psychas · 13 Nov 2007 at 15:27

psychas said:
mh cant find were to download that speedstep can you be more specific plz

+ i lapped my cpu to 1500 grid and waterblock to...

well there is no suck thing called in my bios maybe is one of them : Transaction Booster , Cpu spread spectrum, cpu voltage damper

Cob · 13 Nov 2007 at 15:29

They're in the Configure Advanced CPU Settings menu-

psychas · 13 Nov 2007 at 15:34

kk got it playing cs:s mix now do it in a bit

psychas · 13 Nov 2007 at 16:49

Cob said:
They're in the Configure Advanced CPU Settings menu-

did that cpu-z still jumps so what should i do now just raze fsb and sometimes voltage till i reach my desirable speeds?

Cob · 13 Nov 2007 at 16:51

Disable all the options in that screenshot except for CPU Ratio Control and PECI.

And once that's done you can start raising the FSB and volts.

psychas · 13 Nov 2007 at 17:09

Cob said:
Disable all the options in that screenshot except for CPU Ratio Control and PECI.

And once that's done you can start raising the FSB and volts.

well did everything as you said cpu-z does not jump , but as soon as i raze cpu voltage to 1.3125 i think and set fsb to 333x9 when i load windows it does not load crashes and give me windows and it says: DMA-1 Error
Fatal Error... System Halted :confused:

any ideas?

Cob · 13 Nov 2007 at 17:10

Stick your CPU voltage upto 1.35v.

It's all trial and error.

psychas · 13 Nov 2007 at 17:15

nice one it worked so every time i get that error i go up 0.05 v ?

Cob · 13 Nov 2007 at 17:20

I would go up by 0.025v at a time.

Remember to keep an eye on your temps.

psychas · 13 Nov 2007 at 17:28

cob i still crashed after 5 min on 1.35v same error :eek:

Cob · 13 Nov 2007 at 17:40

More volts.

1.35v is nothing.

psychas · 13 Nov 2007 at 18:28

till what temperatures i can go? currently im on 333x9 1.4v not sure if im stable but i ran crysis demo

psychas · 13 Nov 2007 at 18:51

well is those temp ok? and for some reason in bios im on 1.4v and in cpu-z its like 1.336 is it suppose to be like that ?

Cob · 13 Nov 2007 at 19:16

Idle temps mean very little tbh. Run Prime95 v25.5 for 10 minutes and see what the load temps are. Try to keep them below 70c.

psychas · 13 Nov 2007 at 19:27

cob what does it mean when you restart pc increase fsb then to try to start windows it rather does not load or loads and crashes does it means need more voltage? currently i am on 365 x 9 , 1.4875 v

edit: have to go to work finish it tomorrow hope for 3.6

Cob · 13 Nov 2007 at 19:31

Yeah Windows not loading means more voltage.

What settings are your memory running at atm?

psychas · 14 Nov 2007 at 09:46

well i booted with 3.6ghz i nearly on the limit with voltage im up on 1.6875 and i can go only once more to 1.7 thats it... heres the picture i did not run 8 hours of testing yet. ram is on 800mhz should i do something with it or leave it. ?

edit: tried prime 95 crashed straight away now in 1.7v max on bios what should i do...? (back in few hours)

Cob · 14 Nov 2007 at 15:55

I would drop the overclock and try to see what you can get stable at 1.6v first.

Your load temps at 1.6v may be enough to scare you.