Rampage :)

8 Pack · 20 Mar 2013 at 14:46

Any GSKILL Pi series or Ripjaws I have tried do 7-11-7-28 1T 96 TRFC to bench. Also GSKILL Ripjaws 2133 9-11-9 are excellent and Corsair Dominator 2000mhz 9-10-9.

If its stable leave it!!!! Dont update bios man!!! I have said this so many times. Some settings that users cant adjust are changed in bios revision which does effect the overclocking.

Nickolp1974 · 20 Mar 2013 at 15:09

ram is these Mushkin 4GB 2x2G #996826 1600MHz 6-8-6-24, what do you think??? will they work ok for benching only??

Do you know if ocuk have any what you would consider decent 3930k batch's at present??

somethings not stable thats the trouble, running quite relaxed, speeds/timings/etc

8 Pack · 20 Mar 2013 at 15:45

I have not tested the latest batch to be honest. I am building at the mo with the chips I have.

The Mushkin look like PSC yes. I would try get G.SKILL though if you can.

Nickolp1974 · 20 Mar 2013 at 16:39

do you know what ic's are in these F3-12800CL7Q-16GBZM

8 Pack · 21 Mar 2013 at 09:44

Samsung.

Nickolp1974 · 30 Mar 2013 at 17:34

hi bud, you ever used the hotwire feature of the rive with suitable gfx, info is very sparse

8 Pack · 30 Mar 2013 at 18:25

not on RIVE. I used it on MVE several times with older cards I was using to get Hardware points on the bot. It works well if you get the wiring correct on the card.

Nickolp1974 · 1 Apr 2013 at 12:02

when you say "get the wiring correct" are you talking about the various solder/bridge points on the card??? do i not just plug and go on my matrix plat?

8 Pack · 2 Apr 2013 at 10:29

It not just plug and play you have to solder to get the best from it.

Nickolp1974 · 2 Apr 2013 at 12:07

so would you be able to tell me which points to solder

1. LN2 not needed
2. ADJ MVDD?????
3. ADJ VDDCI???
4. R4E???

Nickolp1974 · 2 Apr 2013 at 12:16

1. disable gpu overvoltage protection
2. reserved for manual memory volt mods
3. res. for man. gpu volt mods
4. Enable VGA hotwire function

Nickolp1974 · 8 Apr 2013 at 23:26

Hey man, will gskill pi's cl6 be any good for my system??

8 Pack · 9 Apr 2013 at 22:26

Yeah they are good dimms. Pi's are PSC. I have some that do 2600-2650 C6 on LN2.

Nickolp1974 · 9 Apr 2013 at 22:51

There in a 6x2gb config, so will 4 of them work in quad channel config?

8 Pack · 10 Apr 2013 at 09:44

Yep!!!

Nickolp1974 · 10 Apr 2013 at 22:29

Any ideas what an average set on air will do?? Want to know if there worth getting

8 Pack · 10 Apr 2013 at 22:46

hmmmmm not sure whats average. Most PSC I have had do around 2350+ 7-11-7-28 1T. G.Skill Pi are normally great example!!!!1

Nickolp1974 · 10 Apr 2013 at 22:52

Sounds good, is 90 delivered a good price for 6x2gb

Edit:just bought em, so no doubt need a hand when they land!

8 Pack · 11 Apr 2013 at 11:08

I know the settings for that stuff so dont worry. GSKILL Pi are rare now treat em well!!!

Nickolp1974 · 11 Apr 2013 at 16:22

Few questions.
As there used i need to test all 6, do i just set xmp for this? And which are the tests on memtest which i can use to speed up the process, 5&8??

As im on 3820 and using 125 strap so that gives me 1866 or 2333 as a base have you got some 1st's settings for these and i can have a play around with the rest.

Thx for your help

Edit. Oh and check this and help out if you could, pls
http://forums.overclockers.co.uk/showthread.php?p=24101764#post24101764