random restart

Scotteh · 8 Jul 2012 at 02:55

http://www.lexet.net/bsod/1

ok set that, #58 and #59 were before restart, #60 after restarting

seem fine?

Could that be what was causing the issue?

wazza300 · 8 Jul 2012 at 02:59

could be,see how its raised vccio from 1.062 to 1.087v? you can do it manually but xmp sets it all up for you

see how it is and post back if it still does it,you can tweak it further

Scotteh · 8 Jul 2012 at 03:02

Ok thanks a ton!

Will be going soon, so will post back tomorrow if it continues

Also on another note, any idea why the memory dumps aren't saving?

(images on prev. page)

It does; collecting data for crash dump, initializing disk for crash dump... then does nothing

wazza300 · 8 Jul 2012 at 03:06

i dont know,could be down to user account/permissions to save ect?

Scotteh · 8 Jul 2012 at 03:23

Only ever had 1 user account and it used to save them in december o.o

Also, assuming that the XMP has fixed my timings (by looks of things it was running at 11-11-11 instead of 9's

Anyways, thanks again.

Scotteh · 8 Jul 2012 at 04:24

Damn, not even an hour and already BSOD'd

0x0..c4 error again.

wazza300 · 8 Jul 2012 at 14:49

try manual vccio of 1.10v

Scotteh · 8 Jul 2012 at 15:33

Would I be able to do that with the XMP on or do I need to turn it off?

edit; nvm set it to 1.1v

Scotteh · 8 Jul 2012 at 19:01

Also for graphics, should I be using PEG/PCI or PCI/PEG?

Scotteh · 8 Jul 2012 at 20:39

Ok it just restarted again on 1.10v

That BSOD was 0x0...7f and dxgmms1.sys

Scotteh · 9 Jul 2012 at 18:24

Ok changed memory clock to 1150Mhz in MSI afterburner which seems to have dropped it on AMD overdrive so I can now select 1150-1325

Shall see if this does anything.

riskyfrisky · 10 Jul 2012 at 10:51

Have you tried a reinstall of Windows at any point?

Scotteh · 10 Jul 2012 at 12:43

No as mentioned before that'll be the very last thing I do

BodgeITandRun · 10 Jul 2012 at 22:15

Try this handy tool, it gives you details of crashes after by just clicking analyse and then scrolling down.

http://download.cnet.com/WhoCrashed/3000-2094_4-75205821.html

coupe69 · 11 Jul 2012 at 01:00

I take it you have tried running memtest? Preferably a few passes overnight.

Scotteh · 12 Jul 2012 at 00:59

I done 2 passes yesterday no error

8 passes overnight, no error

@BodgeITAndRum the program will no doubt analyze BSOD files which I can do anyways, but there is no BSOD being left so theres nothing to analyze to find the most likely culprit

Scotteh · 13 Jul 2012 at 17:08

again, i've asked this countless times to countless people but no-one seems to answer

http://www.lexet.net/IMAG0030.jpg

Is that likely to cause the BSODs, as it isn't properly clipped in as the motherboard is preventing it from going right in

wazza300 · 13 Jul 2012 at 17:12

Scotteh said:
again, i've asked this countless times to countless people but no-one seems to answer

http://www.lexet.net/IMAG0030.jpg

Is that likely to cause the BSODs, as it isn't properly clipped in as the motherboard is preventing it from going right in

could be but it looks clipped in to me? do you have a lower pci-e slot to try?

Scotteh · 13 Jul 2012 at 18:29

Yeah I just checked again, it seems to be clipped in and I can't pull it without pushing the clip down, just looked uneven to me as it seems one sides further down, but that could be due to it being screwed in

I've just reseated and applied new thermal paste to heatsink, but as far as temperatures go it's still at 35-45 idle

Although the previous thermal paste had little left.