• Notice regarding image hosts and attachments. See here.

Road Cycling Essentials

Status
Not open for further replies.
Started to bake my own flapjacks. Ten times cheaper, tastes better and I can change the ingredients usually add more raisens and treacle. Way too nice though can't stop eating them.
 
A while back I spotted a pair of rims on eBay identical the very very rare Rigida ones on my old Raleigh. They weren't up for much so I bought them as spares in case I mangled one and wasn't able to replace it. Last week I polished one up and used some spare spokes on a front track hub to build one of them up. It looks pretty good but the spokes are too long to actually nip the wheel up. I'm in two minds now whether to get a new rear hub and some more spokes to build them up as a pair. They'll look pretty good and cost me another £50 but I don't actually have a bike to put them on! Can't decide. The front will fit either bike and the rear can swap out onto the Bob Jackson if I use the same cog. I'm just thinking it'll be handy to have a spare pair of wheels knocking about, despite not being able to justify that because I've never actually needed a whole spare wheel...

But then if a nice oldy looking frame turned up that I could use my Brooks saddle on, maybe some moustache bars and these 36-spoke early-aero wheels; now that would be cool...
 
Guy i work with was telling me he was looking to sell a pre-1950s bike that's in 'very good condition' recently. Want me to enquire on the details Johnny? Not much to go by i know but i know nothing about old bikes so the rest of what he said was a puzzle to me.

Haven't gotten out on the bike at all this weekend, boooo :(
 
Hi guys

I'm 5'11" and my inside leg is 86cm / 34". On most frame size guides this suggests that I should be looking at 58-60cm frames. The bike I want, Ribble Sportive Racing, comes in 55 (L) or 59 (XL)...am I really an XL??!
Sounds like it uses compact frame sizing, I'm 6'2" and ride a 55cm compact, but 58cm traditional geometry frame.
 
First cycle commute of 2012 planned for tomorrow! Managed to shift about 5 stone last year through cycling and diet and hope to lose another 4 this year, down from 23st+ to 18st 6! Big goal for me is to drop the next 18lbs to take me out of the "Obese" bracket. Reason I haven't cycled earlier this year is lack of a windproof/waterproof, but I've bought a cycling jacket from Evans which arrived Friday.

If I manage to drop to 15st or lower I'm gonna treat myself to a shiny new bike :)
 
Last year I found some of the hills round me a little on the hard side so rather than MTFU I was looking to change my chainset for something a little easier on the legs (currently running a 42/52) The bike is an old Trek 2300 (http://www.pief.net/bike.jpg) is changing only the chainrings plausible? If so how do I find out what would fit to replace them?
 
Last year I found some of the hills round me a little on the hard side so rather than MTFU I was looking to change my chainset for something a little easier on the legs (currently running a 42/52) The bike is an old Trek 2300 (http://www.pief.net/bike.jpg) is changing only the chainrings plausible? If so how do I find out what would fit to replace them?

There should be a 'BCD' (or sometimes 'PCD') stamped on the chainrings. I would guess it's either 130BCD or 135BCD. Once you find that, you just need to find new chainrings which match the BCD and the number of gears you have on your cassette (8 speed?).

Depending on how small you want to go with the new chainring, you might want to get a whole new crank which can take smaller chainrings. You should be able to pick something up pretty cheap on ebay if thats the case.
 
Some foxes decided that the area below my bedroom window was a good place to go all Barry White so didn't sleep at all last night. End result is sleeping through my alarm and having to drive in, lame as i was really looking forward to cycling in yesterday.

Here's hoping for tomorrow...
 
I'm still waiting for my ribble to be delivered...order went to warehouse for pickup(whatever it means for them) I do hope it will be here this week!

I was reading todays newspaper and saw advert for amsterdam 300

anyone from here will give it a go ?
I will think about it but it is difficult....150 miles in a day is loads of tarmac....breaks every 35miles for 15 to 30minutes...
I will see if I can ride a lot once I get the bike and see hwhere do I stand but most likely, I wont do it ...
 
I'm still waiting for my ribble to be delivered...order went to warehouse for pickup(whatever it means for them) I do hope it will be here this week!

I was reading todays newspaper and saw advert for amsterdam 300

anyone from here will give it a go ?
I will think about it but it is difficult....150 miles in a day is loads of tarmac....breaks every 35miles for 15 to 30minutes...
I will see if I can ride a lot once I get the bike and see hwhere do I stand but most likely, I wont do it ...

Forget it. If you are new to road riding then you need time to build your distances and cycling fitness up.
 
Guy i work with was telling me he was looking to sell a pre-1950s bike that's in 'very good condition' recently. Want me to enquire on the details Johnny? Not much to go by i know but i know nothing about old bikes so the rest of what he said was a puzzle to me.

Haven't gotten out on the bike at all this weekend, boooo :(
I'd love to say yes but I really do have too many bikes :p

Cheers for the offer :)
 
Do you already have clipless pedals? If not then it might be worth considering MTB ones, they're not quite as 'good' as road ones but as far as i can tell they wont make a difference in the real world for most people. Reason why i suggest this is because MTB shoes are much easier to find with sunken cleats.
 
I do already have pedals but one of them is broken on one side (after I came off in truly epic style and ripped the spring open) so I think I'm going to get a pair of Eggbeaters. Do MTB cleats only fit MTB pedals or are they completely interchangeable?
 
Road cleats are too wide to be recessed. (Mine stick out slightly over both sides of my shoes)
You'll need to decide if you want mtb pedals, which can be recessed or road pedals, which cant.
It is possible to get shoes which are compatible with both fitting types (2bolt mtb style and 3bolt road style) but obviously they cant be recessed because they need to accomodate road cleats.

Also, where are you going for your fitting?
It's great, mine made a big difference to my riding.
 
Last edited:
I do already have pedals but one of them is broken on one side (after I came off in truly epic style and ripped the spring open) so I think I'm going to get a pair of Eggbeaters. Do MTB cleats only fit MTB pedals or are they completely interchangeable?

I ride using SPD pedals which are a type of MTB pedal, they only work with 2-bolt compatible shoes. As said above anything compatible with both types can't be recessed due to the width of road cleats.

The only real disadvantage of SPD compared to typical road cleats that i know of is that there's less surface contact so with cheap shoes you can get 'hot spots' over long distances (where the constant flex and therefore rub of the shoe in one spot, where the cleat is, causes the sole of your foot to become hot there). However a half decent pair of shoes nullifies this for most people (mine cost £30 and i haven't experienced anything significant yet). They also weigh a bit more, but nothing to write home about. SPD MTB pedals/cleats are also quite a bit cheaper in the long run. Half decent pedals can be picked up for as little as £20 for example (M520) and the actual cleats themselves cost much less and last much longer than road cleats as a result of being recessed into the shoe.

For me MTB cleats just seemed like the much more logical option. I'm not the type of rider who's fussed about 100% pedalling efficiency or riding with the bare minimum weight. I'd much prefer a cheaper alternative that lets me hop off and walk around the local supermarket without changing my shoes. But then that's because i don't have a hope in hell at being anywhere near as fast as you lot!

For reference, this is the combo i have:

http://www.chainreactioncycles.com/Models.aspx?ModelID=3759 (sadly these could be had for £17 last month!)

http://www.chainreactioncycles.com/Models.aspx?ModelID=70097 (thse could be had for £35 from ribble last month, for some reason my work proxy is blocking their website though so can't link)

The shoes are surprisngly comfy, especially when walking on grass/mud (which is what they were designed for i guess...) but are a little slippery on smooth wet surfaces!
 
Last edited:
The only real disadvantage of SPD compared to typical road cleats that i know of is that there's less surface contact so with cheap shoes you can get 'hot spots' over long distances (where the constant flex and therefore rub of the shoe in one spot, where the cleat is, causes the sole of your foot to become hot there).

The main disadvantage of MTB shoes is that they are much less rigid. Flex contributes to hot spots and wastes energy.
 
Status
Not open for further replies.
Back
Top Bottom