• Notice regarding image hosts and attachments. See here.

Road Cycling Essentials

Status
Not open for further replies.
Yep. It's what got me into cycling 3 years ago :)

It's funny how back then I found the thought of the 24 mile Portishead loop ride daunting :p

Haha, exactly. What route are you doing, the Clevedon Challenge I assume? I'll be there two along with 1-3 others. Fancy meeting pre or post?
 
[DOD]Asprilla;22122559 said:
Garmin Edge 800 rocks.

That is all.

It would be much better if you didn't have to turn the brightness all the way down to make the battery last, which then makes the screen hard to read.
 
It would be much better if you didn't have to turn the brightness all the way down to make the battery last, which then makes the screen hard to read.

I'm using the TalkyToaster OSM maps on the device and the contract is better than the Garmin supplied maps. Makes it easier to read with the brightness down.

http://www.scarletfire.co.uk/2012/02/osm-maps/

Reading everything else is fine.
 
[DOD]Asprilla;22122987 said:
Details man, details!

Pictures I can wait for, but not giving any info is just cruel.

nah it's just TOO epic for words!

only images will suffice!

on a related note

can someone help me plan a longer and longer ride from work
I'm trying to work up to a 45m ride and at some point 65+
but I just can't figure out a ride locally that's not on the main road which is around that distance.

I'm not really sure how far I can ride realistically in a couple of hours or so
I was thinking of this kinda route
http://ridewithgps.com/routes/1309463
but then I could just do this (to my potential new work loc and back)
http://ridewithgps.com/routes/1309469

does anyone in or around the truro/cornwall area have advise?

I'd like to do this in sep (I may be getting ahead of myself)

http://www.moor2sea.com/

ideas? comments? jokes?
 
[DOD]Asprilla;22119064 said:
I had the same but they were also frank about the fact that the new stem and seat position was a case of polishing a poo. Yes, the reach was right and yes the saddle was right but the drop between saddle and bars was around 6".

It was very areo and quick; the following week I finished quickest in a 70 mile Dorset CTC sportive but I could barely walk after getting off the bike.

Sorry I missed this post. That's essentialy what the guy who fitted me said, but I wasn't expecting the back ache! I can still feel it now from Saturday, it's goosed!

I might get a bike fit down at Cadence Sport that isn't too far from me, but instead of fitting me to a bike, get him to find the geometry to suit me so I can go and find a bike suitable.

The problem I've got is the bike I bought is from one of the lads I ride with, he did me a good deal and I'd feel like I was ripping him off by ditching the frame and putting the components on a new frame.

I'm contemplating a matt black carbon one from DengFu, but not sure what the general concensus are on those are for a 92kg rider.
 
I'd like to do this in sep (I may be getting ahead of myself)

I think that's achieveable. You still have around 11 weeks to train for that.
An extra 10 miles a week should be enough to get you ready for it.
Try to do some single, longer rides as well as your daily commute (even if you increase the distance of your commute, it's still good to get used to riding 5-6 hours at a time).
You should aim to ride around 75% of your chosen distance at least once then, on the day, with all the other riders around you, you will be able to push yourself to do the last little bit as well.
 
I'm thinking of getting a Topeak Morph pump for in my bag or on the frame for longer rides. Anyone got one? I like the fact that it's got a gauge. Do any other small pumps have gauges?
 
I'm thinking of getting a Topeak Morph pump for in my bag or on the frame for longer rides. Anyone got one? I like the fact that it's got a gauge. Do any other small pumps have gauges?
I have one. The gauge is very handy when inflating road tyres, as it's hard to tell the difference between 70psi and 100psi just by feeling the tyre. The fold out stand is of dubious value, but it's a well made and robust bit of kit. The only downside is the size, which makes it difficult to mount on a smaller frame. I am sure you'll have no problem with any of your bikes, though (except the RSW :P).
 
I'm riding a carbon frame at 100kg, so you'll be fine.

I think the "DengFu" frames he's talking about are the unbranded carbon frames from china? They look like they come from the same moulds as the big brands (pinarello and cervelo are quite distinctive shapes and are both quite common shapes from these sellers) You cant tell if they have used the same quality of carbon though, or gone through the same quality control processes.

I have some unbranded chinese carbon wheels. They cost around £250 where an equivalent weight wheelset from one of the big wheel manufacturers would have cost nearer £1000. I only use them for racing so they havnt done many miles (around 500, at a guess) but they do get a hard time, battered through potholes, etc (and i'm not light, >13stone).
They have held up well so far, but i still think that it's a gamble and if you cant afford to lose the money, buy something from a proper company with a QC process and backed by a warranty.
 
I have one. The gauge is very handy when inflating road tyres, as it's hard to tell the difference between 70psi and 100psi just by feeling the tyre. The fold out stand is of dubious value, but it's a well made and robust bit of kit. The only downside is the size, which makes it difficult to mount on a smaller frame. I am sure you'll have no problem with any of your bikes, though (except the RSW :P).

Do you find the gauge moves in 'stages', as in it doesn't move smoothly across the scale and 'ticks' up to the next mark on the scale? Just got one yesterday, it's brilliant in terms of pumping up a tyre quickly, but the fact that it doesn't seem too good for very accurate measurements is slightly frustrating. Thinking i may potentially have a dodgy gauge.
 
Received my Fulcrum racing 1's today. Fitted them up, but not ridden them yet. Interested to see if my average speed picks up at all. Upgraded from Mavic CXP22's. I've also dropped my bars and removed a spacer on the headset. Looks much improved imho.

155bd2a0.jpg
 
Last edited:
I'm contemplating a matt black carbon one from DengFu, but not sure what the general concensus are on those are for a 92kg rider.

In the Road Buying Advice section on the Bikeradar forum there is a massive thread called something like 'Beginners guide to chinese carbon' which should be able to answer any questions you have about Dengfu.
 
I'm thinking of getting a Topeak Morph pump for in my bag or on the frame for longer rides. Anyone got one? I like the fact that it's got a gauge. Do any other small pumps have gauges?

I'm thinking of getting a Lezyne Micro Floor Drive HPG. They do it without a gauge (HP) and the HPG is with gauge. Quite well reviewed and looks nice :)
Having said that though, my experience with Lezyne stuff is a bit hit and miss but Topeak accessories seem to be consistent in their good quality.
 
Status
Not open for further replies.
Back
Top Bottom