• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

****San Diego 3700+ Steppings and Clocks- Retail and OEM****

It's an OEM bought from OcUK on Monday. Heres a pic I took earlier tonight right after running 3dmark 2006, 40C and dropping after the benchmark :D I'm going to run prime overnight tonight to confirm it's 100% stable, I ran prime at 1750mhz with stock voltage lastnight and it was fine :)

2869.JPG
 
If thats prime stable thats a very nice clock on those volts. Takes me 1.57v to get mine prime stable at that speed, so even if its not stable you've got plenty of headroom to up volts to get it there.
 
:D will do :-) My first clock yesterday was 1750 (tested with prime), I've moved upto 2869 and will run prime tonight

Temp 3 seems to jump about a bit, I was wondering if its simply "not connected" it jumps between -6 to 24. I've confirmed the cpu temp in the bios, same with the volts (see below), Maybe the volts are read wrong by SpeedFan as I have 2x12v rails? I guess SpeedFan doesnt support my board that well :rolleyes:

core = 1.39
Vcc(3.3) = 3.4
Vcc(2.5) = 2.57
Vcc(1.5) = 1.47
Vcc(1.2) = 1.20
+12v = 11.64
Vcc(5) = 4.94

Sys Temp = 36
CPU Temp = 38
 
I started the test of lastnight at 12 midnight and it failed 10minutes in so I increased the core voltage by .25mv to 1mv over stalk voltages and it's rock solid.

I ran the prime torture test for 15hrs 46min and it gave me no errors and no warnings, guess I'm stable then :D

What is the highest voltage you can put through these chips on air? Can't wait to get better ram at the end of the month and go for 3ghz :eek:

prime%20result.JPG
 
Thanks :) you never can tell how its going to turn out so I count myself lucky ;)

I ran the default "Blend" test as I wanted a mixed system test with the ram being tested as it's maxed out. I think I'll run the "in-place large FFTs overnight tonight to stress the cooler a bit.

Any thoughts on which ram I should go for at the end of the month? I'm going to be looking for 2x1gig sticks at around £160. Tight timings or higher rated clock speed?
 
Here is what I got on stock volts, can go up to HTT 260 on stock but after that its not loading windows, and I aint too bothered about messing with the cpu volts at the moment, quite happy with what I got :) This was an OEM chip from OC got it week past Friday.

14o7g2p.jpg
 
You must log in or register to reply here.
Back
Top Bottom