Show Us The inside of your Case!

MOOGLEYS · 4 Jul 2012 at 21:51

doyll said:
You are not using the PWM adapter and Y splitter? Assume your mobo has PWM control

Board has PWM but the H14 uses voltage for the fans that came with it ? I can set voltage and temp levels but it is doing a good enough job as is for now..

doyll · 4 Jul 2012 at 21:59

Understand. Picked up my R2 used with no fans and put all PWM in. All case fans and CPU fans are controlled by CPU fan header using Akasa & Gelid PWM splitters that use molex plug for power from PSU.

MOOGLEYS · 4 Jul 2012 at 22:18

I have one of the Akasa PWM splitters they are a superb idea. My board can control the voltage to the fans depending on temp so is not a lot different to PWM.

mrk · 4 Jul 2012 at 22:38

I chavved a few layers of box padding from work and made some surface coverage. It does nothing for sound that I can tell as my system is very quiet anyway but it does stop dust from settling on flat surfaces around the case itself. Placed one on the 5.5" bay floor as well.

Yeah yeah, in before the "DEM BROWN FANZZZ"

I've sliced down the cones closest the HDD cage to allow for airflow through it. there's a few TB stashed in there along with the SSD.

V F · 4 Jul 2012 at 22:44

It's that padded sound cell from Armageddon.

MOOGLEYS said:
Temps are a couple of .c higher but it is silent all of the time no fan ramp up noise and more importantly it's not leaking water onto my gpu...

O_o A fault occurred? all I seem to read across many places is faults with these H100's. Not all that cracked up to be?...

Hows yours, mrk? no voltage problems with the pump...

mrk · 5 Jul 2012 at 08:37

I have the H80, faultless, silent, awesome.

jeff6475 · 5 Jul 2012 at 09:17

think its mainly the h100

KiiYzOo · 5 Jul 2012 at 10:41

mrk, that looks surprisingly cool

like waves in the bottom of your case

mrk · 5 Jul 2012 at 10:51

Cheers!

I'm thinking of moving the HDD/SSD drives to the 5.5" bay but not sure where to buy the adapters for the 3.5 to 5.5 conversion? This would free up a lot of space down below not to mention improve cable management as it's a bit cramped behind the mobo tray!

doyll · 5 Jul 2012 at 11:54

Here's a 2x 2.5" adapter.
http://www.overclockers.co.uk/showproduct.php?prodid=CA-292-LL

Google "5.25" bay adapter" and you will find loads at cheap prices.

mrk · 5 Jul 2012 at 12:38

Ooh, those are pricey for what they are but will Google it

doyll · 5 Jul 2012 at 12:39

thatbay place has them too

IronWarrior · 5 Jul 2012 at 17:51

mrk, does that foam stuff really help with the noise?

mrk · 5 Jul 2012 at 17:52

Don't know. My PC is too quiet anyway so I don't notice any difference.

V F · 5 Jul 2012 at 22:23

jeff6475 said:
think its mainly the h100

Which seems odd, no? as it's the exact same model pump...

mrk said:
Don't know. My PC is too quiet anyway so I don't notice any difference.

Mouse clicks louder than the computer?

Name · 5 Jul 2012 at 22:27

New system that i built last week

First build. Managing the cables was the hardest, I've done as good a job as i could in 2 and a half hours

MOOGLEYS · 5 Jul 2012 at 22:28

I have had three H100's all have now died. The last was leaking water onto my GPU.

doyll · 5 Jul 2012 at 22:45

mrk said:
Don't know. My PC is too quiet anyway so I don't notice any difference.

So is mine.

Mouse clicks louder than the computer?

All the mice I've heard squeak. :rolleyes:

And "squack" when the trap gets them.

KiiYzOo · 6 Jul 2012 at 00:24

V F said:
Mouse clicks louder than the computer?

My keyboard clicks louder than my pc, and I can easily hear my pc

my keyboard is a mechanical one though with mx blue switches

Number_25 · 6 Jul 2012 at 15:41

Not upgrading untill September (earliest) now, so I decided to clean out my computer after accumulating about 5 months of dust in a badly ventilated case.

These are the results in a side-by-side comparison!

Not bad considering the case has no cable management.

****Show Us The inside of your Case!****

Show Us The inside of your Case!