****Show Us The inside of your Case!****
- Thread starter Camoe
- Start date
Associate
- Joined
- 9 May 2012
- Posts
- 303
They seem good so far yes. They certainly are quite. The 120 at the top is the stock one from the back which got replaced by the H80 fans, that is ever so slightly louder than the AF140's, but then it is only a 120 so is spinning faster.
No not yet.
Heres Real temp, playing BF4 for a couple of hours earlier, granted it doesn't max out the CPU 100% but gives you an idea. I think it goes to about 70 on full load off the top of my head... (Edit: temps are with Corsair link set to the quite profile)
BTW, just FYI Coretemp seems to randomly crash/freeze Win 8.1 64 bit. RT doesn't. - http://www.alcpu.com/forums/viewtopic.php?f=62&t=2569 - Thought it was the overclock at first!
If i had the room, I'd have one of them over the 300R, Love the look of the 540.
Thanks mate.
Soldato
Didn't like the kink in the tubing coming from the back rad to the res so I've put a 90 elbow in its place.
That color scheme.....<3 droool
Soldato
- Joined
- 19 Feb 2012
- Posts
- 4,409
Really? You quote all those images just to say that? Do people a favour an don't quote the images, saves a lot of forum resources and scrolling.
Soldato
This looks OK ?
I put a Corsair H60 in today
Had to remove a Ram stick though
I put a Corsair H60 in today
Had to remove a Ram stick though
Last edited:
Soldato
What does it look like without the pipes being crossed over?
Soldato
Last edited:
Yeah I meant it would look better uncrossed, sorry for not saying that more clearly lol
Soldato
Haha no I was just agreeing with you.
Soldato
If I uncross them the CPU block will sit sideways yes ie the corsair badge will be sideways on ?
Also the corsair fan is a 3pin ( connected to the CPU_FAN )...can i just run in off molex as the cpu is sitting at about its rpms are about 960
or lol should the pipes actually be at the bottom ?
Also the corsair fan is a 3pin ( connected to the CPU_FAN )...can i just run in off molex as the cpu is sitting at about its rpms are about 960
or lol should the pipes actually be at the bottom ?
Last edited:
Soldato
I would set it up like this.
If you prefer the pipes at the top then maybe like this.
_575px.jpg)
You can just plug it into a Molex although if your motherboard supports it you can setup a Fan Curve so that when your CPU reaches a certain temperature the fan will speed up to give more airflow. Which means its quiet when idle and a bit loader but better airflow when under load.
Soldato
Yeah that looks more like it , thanx demon
Soldato
No problem, glad to help.
Your board should support fan profiles to automatically adjust fan speeds.
Download Asus Fan Xpert 2 to create your profiles, I use them for mine too they work very well.
Soldato
Yeah I'll give that a look at tomorrow , and thanx again :
Soldato
Yeah it's the 540 ..and thanx Crypto
and thanx for the advice guys
Crypto and thanx for the advice guys
Associate
Minimise air and support water flow (gravity pushes water down the pipes).
Associate
My Corsair 540 Air build.
Last edited: