****Show Us The inside of your Case!****

[TheGedi]

some new fans and tidied wires up a bit

How do you find those Xilence fans? mines seems to make a constant hum and is driving me mad as its the only part that makes any substantial noise?

 

[Tweaker]

New Lancool case

 

[fireisdangerous]

Ive upgraded from a 5850 to a gtx570 added new red braided cables and 120mm from bitfenix!

 

[skid34]

How do you find those Xilence fans? mines seems to make a constant hum and is driving me mad as its the only part that makes any substantial noise?

i have them turned down slighty,so no louder than the 200m in front of case and its right next to me on desk, i tempted to get a 3.5 fan contoller as the bios fan settings a too large a jump

 

[Wynthorpe]

Heres mine, I have a H70 on the way & i want to tidy up the cabling some more, can anyone gie me any ideas how to do that?

 

[Phil2008]

My new HIS 6950 2gb in antec 900

 

[m4rmite]

all these lovely neat cases
well heres mine to burst the ocd's bubble some of you have

front of case

nice and tidy inside
the rad is at the top.. just out of view

 

[V_R]

So, i've got to ask this as it seems no one has....

Why is this thread here when there is the Cases Gallery Sticky? I check that thread then this and its almost always the same pic's just posted in both threads....:/

 

[TheGedi]

i have them turned down slighty,so no louder than the 200m in front of case and its right next to me on desk, i tempted to get a 3.5 fan contoller as the bios fan settings a too large a jump

Hoping to get a Fan Controller at some point when i get a few more fans, once they are turned down do they shift sufficient air and remain as close to silent as you could hope for?

Thanks
Ross

 

[V F]

Ive upgraded from a 5850 to a gtx570 added new red braided cables and 120mm from bitfenix!

Very nice. The case looks very deep or is it the illusion from the flash?

Heres mine, I have a H70 on the way & i want to tidy up the cabling some more, can anyone gie me any ideas how to do that?

Do you have a lot of time? patience is the key. I spent two days doing mine. It was a lot easier when I stripped the case putting each part and routing each bit in working out the best way to clamp down on the clutter.

So, i've got to ask this as it seems no one has....

Why is this thread here when there is the Cases Gallery Sticky? I check that thread then this and its almost always the same pic's just posted in both threads....:/

I don't know. Why does the streets always have litter? yet very few cares about it.

 

[Guitarman0]

Just finished watercooling

 

[remtard]

Woahh, so many 932's here that look nice
I should really do something to mine ><

 

[mjones1]

My temp setup until i am sure what i want to do.

 

[MouthBoy]

My temp setup until i am sure what i want to do.
SNIP!

Could you not mod the top of the case to get the rad up there instead of vertical? That would look good too.

 

[setter]

Been messing about with different fans in my case, took the 1400 rpm front intakes and put them on my cpu cooler, good cpu cooling but case airflow has suffered badly. Fitted 2 x 1000 rpm 140's to the front of the case, saw a rise of 10-15c in gpu temps, tried fitting an antec spot cool but it's made no difference at all. Gonna put the faster 140's back on the front of the case and reinstall my akasa vipers on the cooler.

 

[MouthBoy]

Setter, has having the 140mm fans on the Super-mega helped at all? Is it quietier with the same temps?

 

[setter]

Temps are a little higher at load, 2-3c and noise is up at idle, quieter at load as the vipers hit 1900 rpm, ran those at 700 rpm at idle when i had them fitted.

 

[MouthBoy]

I must be the only person in the world that runs my CPU fans at 100% all the time lol.

 

[setter]

Theese yate loons im using now run 100% all the time, the cpu header on my motherboard cant control 3 pin fans, just 4 pin PWM models.

 

[_lecro_]

I leave my radiator fans on 100% when i go out,
guess im a bit paranoid about coming back to a watery mess