Silverstone TJ09B

Flanno · 11 Jan 2007 at 02:45

I ordered the Cool Answer 3 Laing Pro edition anyway.
Going to keep my Mirage. Besides the looks there does not seem to be any other compromises. Hopefully my quad core temps will drop a bit now.

clone · 11 Jan 2007 at 07:37

marscay said:
case looks a bit overpriced for me, not bad but nothing special?

You got to see it in the flesh,the cooling setup is one of the best ive had in a case and ive had a few,the main bit i like is the videocard cooler.

clone · 11 Jan 2007 at 15:36

Got most of my watercooling parts yesterday, just waiting on the 120.02 thermochill rad.

Big box of watercooling part`s.
Danger Den 1/2" ClearFlex 60 Tubing 14 foot

PTFE Thread Sealing Tape
Zinc Plated Jubilee/Wormdrive Clip 12mm to 20mm 12
Sharkoon 120x120x25 Silent Eagle 1000 2
Laing DDC-1 Ultra 12volt Pump with Plexi Top 1
Barb - Size: 1/2"
Damper - Damper Kit
Repack Cooling Slot In Black
Smoothy Water Anti Corrosion Liquid UV Green 1ltr
UV Ready To Go LED With Plexi G1/4 Plug
Arctic Silver 5

AquaXtreme MP-05 PRO Limited Edition CPU Water Block (delrin)
Revoltec Ultra Bright UV 2 x 10cm Cold Cathode
UV Reactive SATA Cable Yellow 1x 50mm 1x100mm

Flanno · 11 Jan 2007 at 15:52

Very nice. Unfortunately for me, most of it is over my head

What case are you planning to watercool. I thought you had the TJ09 up on MM.

clone · 11 Jan 2007 at 16:18

Flanno said:
Very nice. Unfortunately for me, most of it is over my head

What case are you planning to watercool. I thought you had the TJ09 up on MM.

Not selling it now so im going to watercool it

Flanno · 11 Jan 2007 at 16:44

Nice. Of course you will post pics ?

My biggest problem with water cooling or any mods is just having to cut holes in the case. I am crap with all this diy stuff. So I take it you will mount the radiator where the top 2x120mm fans used to be. So you are going to cut into the case ? And the pump - is that being mounted outside or will you have room to mount it in the bottom.

clone · 11 Jan 2007 at 16:54

Rad will be mounted to the rear 120mm fan via a swiftech radbox on the outside so no cutting hole`s needed at all,then pass the two hose pipes through the two predrilled hole`s that come standard with my case and then fit the res into one of the front bay slot`s,not sure where the pump will be going yet.

Lt Goody · 16 Jan 2007 at 17:28

The fans that come with case run at 1200rpm don't they?thats what mine run at and thats what it says on silverstone website anyway,just that 2100rpm was mentioned.

Flanno · 16 Jan 2007 at 17:37

Yeah.....I thought I read before they were 2100rpm jobs. Should be quiet enough. Think they are evercool brand.

Lt Goody · 16 Jan 2007 at 17:38

ok thanks m8,i still think i might put some noctua's in though.

tastyweat · 17 Jan 2007 at 13:54

Lt Goody said:
ok thanks m8,i still think i might put some noctua's in though.

I did & they work a treat

Zen · 17 Jan 2007 at 14:02

when OcUK going stock this

Van Diemen · 18 Jan 2007 at 20:48

I bought myself a Lian Li v1000 back in December as I could not find any TJ07s, but Im thinking of getting one now. Its either the TJ07 or TJ09. The TJ09 looks great, but will I be able to install A BIX120.2 or even a Thermochill PA120.2 under the top fan mounts? I want all my stuff to be in the case

Hades · 18 Jan 2007 at 21:14

Van Diemen said:
I bought myself a Lian Li v1000 back in December as I could not find any TJ07s, but Im thinking of getting one now. Its either the TJ07 or TJ09. The TJ09 looks great, but will I be able to install A BIX120.2 or even a Thermochill PA120.2 under the top fan mounts? I want all my stuff to be in the case

Nope. Both the TJ07 and TJ09 will need modding to put a 120.2 in the roof because the two fan mounts are placed very slightly apartt. The TJ07 has plenty of room down below though.

Van Diemen · 18 Jan 2007 at 21:29

Hades said:
Nope. Both the TJ07 and TJ09 will need modding to put a 120.2 in the roof because the two fan mounts are placed very slightly apartt. The TJ07 has plenty of room down below though.

Thanx mate. I thought as much. I think Im going to go for the TJ07 on stick a Thermochill PA120.3 in the bottom section.

clone · 18 Jan 2007 at 22:12

You have room for the bix stealth 120.2 rad inside as it`s very thin

Van Diemen · 18 Jan 2007 at 22:35

clone said:
You have room for the bix stealth 120.2 rad inside as it`s very thin

Iv got my heart set on a Thermochill PA. Should be quite easy to install in the bottom section of a TJ07.

My QX arrived today

. ordering case and Rad now.
I promised myself that this has to be my last upgrade. (NO MORE)

Anybody want an only been used for 6 weeks E6600?

Mr.Bon · 29 Apr 2009 at 10:14

u cant believe every picture link is broken!!!
this is a rare case isnt it? its the only Temjin TJ09B thread!!

anyone got high res pics of it?

Doug · 29 Apr 2009 at 10:41

Is it really that surprising that there are broken links in a two year old thread

magicroundabout · 29 Apr 2009 at 16:09

clone said:
Dam sexy case

Never had one of these but it looks class,any Silverstone case owners here.

your photobucket pictures are missing!!

as for Silverstone Cases here's a good thread for you. Not sure if it's been posted already as i've only read this first post

http://forums.overclockers.co.uk/showthread.php?t=17992382