SOME RYZEN 7 1700 OVERCLOCKING!

Mr_Clark1000 · 13 Mar 2017 at 15:46

bro306 said:
4.0Ghz 1.35v Stable Custom loop watercooled.

Interesting - You have exactly the same setup as me except the memory element but my CPU-Z will shown a crappy core voltage of 1.55v.

Can you tell me how you OC'd to that level? Was it in Bios at boot or with ryzen master?

Do you have AI suite as well?

When I OC with ryzen master, setting the volts to 1.35v results in something like 1.55 - 1.6 in ai suite being shown, it's like there is a complete disconnect with what is set in ryzen master and what actually happens...

Also, did you change load line calibration and voltage regulator switching frequency up to 350khz?

It would be interesting to see your reported volts in ai suite or HW info as I am sure it will show a hell of a lot more than 1.35v. Trying to figure out what is real and not on this board seems to be a nightmare.

bro306 · 13 Mar 2017 at 15:49

Just tried but the temps are to high for my liking.
Been playing gta 5 and re7 most of the day at them setting no problems
Passed realbench benchmark easy. And passed the latest 3dmark will try 1.325v see if thats ok.

bro306 · 13 Mar 2017 at 15:51

Mr_Clark1000 said:
Interesting - You have exactly the same setup as me except the memory element but my CPU-Z will shown a crappy core voltage of 1.55v.

Can you tell me how you OC'd to that level? Was it in Bios at boot or with ryzen master?

Do you have AI suite as well?

When I OC with ryzen master, setting the volts to 1.35v results in something like 1.55 - 1.6 in ai suite being shown, it's like there is a complete disconnect with what is set in ryzen master and what actually happens...

Also, did you change load line calibration and voltage regulator switching frequency up to 350khz?

It would be interesting to see your reported volts in ai suite or HW info as I am sure it will show a hell of a lot more than 1.35v. Trying to figure out what is real and not on this board seems to be a nightmare.

Boots in bios at vcore 4ghz vcore +0.2000
I load Ryzen master after when its in windows.

bro306 · 13 Mar 2017 at 15:57

4ghz Cinebench 1.325vcore

bro306 · 13 Mar 2017 at 15:58

I dont use ai suite.

Mr_Clark1000 · 13 Mar 2017 at 16:02

bro306 said:
4ghz Cinebench 1.325vcore

Ok, so 40x100 with offset +0.2, boot, then ryzen master to set 1.35?

You didn't change the loadling calibration stuff to extreme or high or anything?

Mauller · 13 Mar 2017 at 16:13

Lol, it seems that more people are getting 4ghz at lower Vcore as newer bioses release.

bro306 · 13 Mar 2017 at 17:56

Custom PC Realbench 4Ghz Run

Mr_Clark1000 · 13 Mar 2017 at 18:58

This is what I meant by the complete mismatch of voltages and temperatures...

sityeuropa · 13 Mar 2017 at 19:48

Just installed a 240 AIO cooler. My 1700 is at 29c currently at idle 3.8ghz.

Just done a cinebench benchmark, it went up to 48c.

Now to test more...

sityeuropa · 13 Mar 2017 at 20:01

What voltage can you go up to if your temps are still good?

Early sign is good. Very happy with this 240 cooler.

Sieonigh · 14 Mar 2017 at 07:36

ASRock mobos beta bios now include DRAM Timing in OC Tweaker.

http://www.asrock.com/mb/AMD/Fatal1ty X370 Gaming K4/#BIOS

Jokester · 14 Mar 2017 at 11:55

sityeuropa said:
What voltage can you go up to if your temps are still good?

Early sign is good. Very happy with this 240 cooler.

Your load temps will become an issue on regular cooling before you reach a voltage limit.

sityeuropa · 14 Mar 2017 at 15:23

Here is my final setting. Think I'll wait for a bios update before testing again. My 1700 refuses to be stable above 4ghz.

1700 @4ghz - 1.39v
32gb Avevir 2400mhz
Gigabyte Gaming 3
CoolerMaster 240 AIO

Idle temp - 34
Load temp - 57

Scramz · 14 Mar 2017 at 16:03

sityeuropa said:
Here is my final setting. Think I'll wait for a bios update before testing again. My 1700 refuses to be stable above 4ghz.

1700 @4ghz - 1.39v
Gigabyte Gaming 3
CoolerMaster 240 AIO

Idle temp - 34
Load temp - 57

Up your RAM to 16GB or 32GB for 30 mins, your CPU looks like a good one, if it passes that then you are laughing.

Mr_Clark1000 · 14 Mar 2017 at 16:16

Can someone please post their HWINFO64 VDDCR CPU Voltage, under load conditions at their OC levels, and state what they have set the core voltage to?

I'm still trying to get my head around the fact that if I OC to 3.9ghz and set core V to 1.19 in ryzen master, it comes out at over 1.4v in HWINFO or AI Suite... I can OC to 4GHZ too, at 1.35v set in Ryzen master. but that shows as nearly 1.6v in HWINFO and temps end up going over 75c on my Noctua 12...

sityeuropa · 14 Mar 2017 at 16:28

Scramz said:
Up your RAM to 16GB or 32GB for 30 mins, your CPU looks like a good one, if it passes that then you are laughing.

I use 32gb 2400mhz Avexir.

Drollic · 14 Mar 2017 at 17:19

Mr_Clark1000 said:
Can someone please post their HWINFO64 VDDCR CPU Voltage, under load conditions at their OC levels, and state what they have set the core voltage to?

I'm still trying to get my head around the fact that if I OC to 3.9ghz and set core V to 1.19 in ryzen master, it comes out at over 1.4v in HWINFO or AI Suite... I can OC to 4GHZ too, at 1.35v set in Ryzen master. but that shows as nearly 1.6v in HWINFO and temps end up going over 75c on my Noctua 12...

Perhaps something to do with a flakey bios and offset voltage being used and/or a llc setting applying bumping the voltage? Do you have the latest software and bios?

Awahwah · 14 Mar 2017 at 17:38

Anyone used the Asus Prime X370 and clocked the 1700 well? I mean to 3.8 -4.0 ghz range?

cereal3 · 14 Mar 2017 at 17:44

Awahwah said:
Anyone used the Asus Prime X370 and clocked the 1700 well? I mean to 3.8 -4.0 ghz range?

This is what I'm interested in too, also memory speed for that board because 3000-3200 is where I heard good performance gains were at