Haha
- It seems a bit unclear which board is the best, there is some fantastic results coming from B350 boards aswell as more expensive ones. Maybe give it a few weeks.-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
SOME RYZEN 7 1700 OVERCLOCKING!
- Thread starter Gibbo
- Start date
Haha
- It seems a bit unclear which board is the best, there is some fantastic results coming from B350 boards aswell as more expensive ones. Maybe give it a few weeks.
Haha
Please can you test small FFT in prime and see what results you get?
Your current settings 3.6ghz
Soldato
- Joined
- 16 May 2007
- Posts
- 3,221
Thanks for the quick reply, that is exactly what I was after, I am keen to keep voltage as low as possible and also don't see the point of increasing voltage for little gain.
I wanted to use air cooling if possible and that is very useful. I was hoping to use at least 3000Mhz memory so will wait for further BIOS updates to see if that is possible and on which motherboards.
Please can you test small FFT in prime and see what results you get?
Your current settings 3.6ghz
If you could give corsair a kick up the arse and hurry my bracket I would gladly do this. Although there is a coolermaster TX3 for £25 but I dont know how much these could handle.
Please can you test small FFT in prime and see what results you get?
Your current settings 3.6ghz
I can't do it at the moment, the Ryzen PC is running VM's for work, however, it will have some downtime in the week, I will try and do it then.
https://forums.overclockers.co.uk/posts/30595754
Yeah Mate I thanks you for doing it at the time...It was appreciated... but it was at 3.2ghz
Any chance of a 4ghz run? Would love to see what the new temps are
My Prime test at 3.2GHZ had the wrong temperature due to a bios setting, it should've been 15c+ higher than it was. So maybe disregard that one.
4Ghz, 3200MHZ CL14 10 minutes Small FFT.
Permabanned
- Joined
- 15 May 2006
- Posts
- 4,107
- Location
- London
Please can you test small FFT in prime and see what results you get?
Your current settings 3.6ghz
Prime now running for 1hr 8 mins
Core Speed @4.006
Core Voltage stabilized @1.373
CPU Temp stabilized @74C
Bios settings:
CPU Core Voltage: In offset mode
CPU offset mode sign: +
CPU Core Voltage Offset: 0.01250
CPU SOC voltage: In offset mode
VDDSOC offset mode sign: +
VDDSOC Voltage offset: 0.12500
LLC on level 3 for both SOC and Core voltage
That using your 4ghz settings in the other thread?
Prime now running for 1hr 8 mins
Core Speed @4.006
Core Voltage stabilized @1.373
CPU Temp stabilized @74C
Bios settings:
CPU Core Voltage: In offset mode
CPU offset mode sign: +
CPU Core Voltage Offset: 0.01250
CPU SOC voltage: In offset mode
VDDSOC offset mode sign: +
VDDSOC Voltage offset: 0.12500
LLC on level 3 for both SOC and Core voltage
Nice chip you got there, 4Ghz @1.373v. I'm going to try knocking my voltage down a little too.
What cooler are you using?
Yes, though i did lower DRAM voltage to 1.35v and VDD SOC voltage to offset +2 notches.
Nice, I'll have to be a copy cat at the end of the month, just too busy in the next few weeks to keep playing.Yes, though i did lower DRAM voltage to 1.3v and VDD SOC voltage to offset +2 notches.
Permabanned
- Joined
- 15 May 2006
- Posts
- 4,107
- Location
- London
I am using the Next Kraken x62, Also I have switched to offset mode for setting my CPU core voltage and SOC voltage..... And I have set LLC to level 3 for both. Core Voltage is now stable and no longer bouncing all over the place.....Nice chip you got there, 4Ghz @1.373v. I'm going to try knocking my voltage down a little too.
What cooler are you using?
Permabanned
- Joined
- 15 May 2006
- Posts
- 4,107
- Location
- London
This NZXT Kraken is doing a far better job than the noctua nh-d15 and H110 GT I had, However my H110 GT I believe was faulty, @ 4.0Ghz Temps were over 85C.....Nice chip you got there, 4Ghz @1.373v. I'm going to try knocking my voltage down a little too.
What cooler are you using?
My Prime test at 3.2GHZ had the wrong temperature due to a bios setting, it should've been 15c+ higher than it was. So maybe disregard that one.
4Ghz, 3200MHZ CL14 10 minutes Small FFT.
Cheers for posting...So was the Temp 62c actual
Prime now running for 1hr 8 mins
Core Speed @4.006
Core Voltage stabilized @1.373
CPU Temp stabilized @74C
Bios settings:
CPU Core Voltage: In offset mode
CPU offset mode sign: +
CPU Core Voltage Offset: 0.01250
CPU SOC voltage: In offset mode
VDDSOC offset mode sign: +
VDDSOC Voltage offset: 0.12500
LLC on level 3 for both SOC and Core voltage
Thanks...This more like what I was after...So I appreciate it...I really do...
That cooler of yours is taking a pounding....You confident letting it run any longer?
Permabanned
- Joined
- 15 May 2006
- Posts
- 4,107
- Location
- London
The Liquid temperature is my Kraken is being reported as being 40.6 during the prime run...... idle it 32.8..Nice chip you got there, 4Ghz @1.373v. I'm going to try knocking my voltage down a little too.
What cooler are you using?