• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

The AMD Driver Thread

welshrat said:
Will need to try this myself, lost a lot of faith in HUB and TPU send to think it's really good. Not really bothered about it but I did use FSR 3 framegen in stalker 2 on my 7900GRE and it was very good so can't imagine this is worse.
Click to expand...

TPU and others haven’t even mentioned frame pacing so probably aren’t even looking for it. Their whole review centres on image quality.

HUB pointed a 960fps camera at the screen and have hard evidence that the frame pacing is mostly broken.

Seems to be delivering frames as and when they’re ready and generated frames take a fraction of the time to make so you get a very short gap between a rendered frame and a generated frame and then a long gap before the next rendered frame.


In contrast, DLSS framegen has pretty bang on frame pacing.
 
Last edited:
welshrat said:
Will need to try this myself, lost a lot of faith in HUB and TPU send to think it's really good. Not really bothered about it but I did use FSR 3 framegen in stalker 2 on my 7900GRE and it was very good so can't imagine this is worse.
Click to expand...
Fabio at ancient gameplays says just you need to enable Vsync then Framegen will work properly
 
HarryBizzle said:
TPU and others haven’t even mentioned frame pacing so probably aren’t even looking for it. Their whole review centres on image quality.

HUB pointed a 960fps camera at the screen and have hard evidence that the frame pacing is mostly broken.

Seems to be delivering frames as and when they’re ready and generated frames take a fraction of the time to make so you get a very short gap between a rendered frame and a generated frame and then a long gap before the next rendered frame.


In contrast, DLSS framegen has pretty bang on frame pacing.
Click to expand...
Lets hope they fix that then in upcoming releases.
 
HarryBizzle said:
Apparently FSR3 framegen had the same issue, which doesn't make me particularly hopeful.
Click to expand...
Odd never noticed it on Stalker 2, I never use Vsync but do limit framerate to 144 or 120 depending using FRTC. Pretty sensitive to it as well. I remember bloodborne on PS4 and the frame pacing hurt me :-)
 
HarryBizzle said:
Apparently FSR3 framegen had the same issue, which doesn't make me particularly hopeful.
Click to expand...
Can't say I've noticed any issues with fsr3 with frame gen. I use it in BL4, which is pretty fast paced. I've also used it in slower games, like silent hill 2 and dead space remake.
 
Did they remove the CPU temp from the tracking overlay? the option for monitoring that is no longer showing up under the overlay options.
 
Do we have FSR4 for RX 7000 series yet?

We know it exists and we know it works and works well AMD come on... don't be so stingy.... :P

I lose about 10% performance running FSR4 vs FSR 3 but the image quality is WAY better and the performance is still WAY higher than not using it.

Ultra RT 1440P on an RX 7800XT? yes....

 
Last edited:
humbug said:
Don't know if its related but Star Citizen is running fine again in DX11 and Vulkan without the Vulkan SDK with Driver 25.11.1.
Click to expand...

humbug said:
DX11 in the game is about to be turned off anyway, everyone should be running it in Vulkan mode now and especially with version 4.5 due to be released in about a week from now, performance is way better...... they are getting ready to rip what’s left of DX11 in the engine out. Its dead weight code at this point.
Click to expand...
Thanks a lot.
I'll do the windows update I was avoiding, in case it mucked things up again.
 
Bodom said:
Did they remove the CPU temp from the tracking overlay? the option for monitoring that is no longer showing up under the overlay options.
Click to expand...
Not installed the new driver yet but I dont think CPU metrics should be in the GPU software especially when it was reading it all wrong in the first place, my 7800X3D never went over ~2.7GHz with Adrenalin software :rolleyes:

I'm glad its been removed if true.
 
humbug said:
Do we have FSR4 for RX 7000 series yet?

We know it exists and we know it works and works well AMD come on... don't be so stingy.... :P

I lose about 10% performance running FSR4 vs FSR 3 but the image quality is WAY better and the performance is still WAY higher than not using it.

Ultra RT 1440P on an RX 7800XT? yes....

Click to expand...

So what happened to upscaling is no good and you only using native? :p
 
now this might just be a placebo effect but I swear bf6 looked so much better last night everything popped more with the newer fsr
 
humbug said:
Do we have FSR4 for RX 7000 series yet?

We know it exists and we know it works and works well AMD come on... don't be so stingy.... :P

I lose about 10% performance running FSR4 vs FSR 3 but the image quality is WAY better and the performance is still WAY higher than not using it.

Ultra RT 1440P on an RX 7800XT? yes....

Click to expand...
Could you do the same tests again please but in Dog Town in the club below hands apartment or the arena as they are probably the 2 most demanding places in the game :)
 
Bodom said:
Could you do the same tests again please but in Dog Town in the club below hands apartment or the arena as they are probably the 2 most demanding places in the game :)
Click to expand...

Not played it much and i'm not far in to it, its not even installed right now but sure if i can i will, wont come right away tho.... :)
 
You must log in or register to reply here.
Back
Top Bottom