**The ASrock 939dual-SATA2 (ULi M1695) thread**

:rolleyes:

Thanks :D

Currently running : 3700+ San Diego@2640Mhz (240x11) 1.45 Vcore on 939

idle Temp 38 Celsius

I don't want to do the Volt mod. 1.45 is the maximum Vcore I can select in the bios.

Any suggestions how far i can push the 3700+ ?
 
Last edited:
I have not pushed it yet.

All I did was set the max Vcore & set the multiplier to 240x11


I was just wondering what speeds other people getting with the 3700+ San Diego & thi board.
 
Gecco said:
I have not pushed it yet.

All I did was set the max Vcore & set the multiplier to 240x11


I was just wondering what speeds other people getting with the 3700+ San Diego & thi board.
Click to expand...

I did the volt mod :D wasn't too hard at all, got 1.55v-1.60v but max I think I can get is 2.7 with mem loose, I have a new Hiper 580w coming today so once that is in I going to push it and see where I can get :cool:
 
Gecco said:
I have not pushed it yet.

All I did was set the max Vcore & set the multiplier to 240x11
Click to expand...
Put the ram on to a 166mhz divider and set the cpu - nb link speed to 600mhz.
Also disable Cool n Quiet.
 
this is such a great motherboard, i just up graded a tbird 1400 using it from an old ali magik1 chipset to the ali one on this mobo and i didnt have to reinstall windows..also installed it into a via mobo install hdd before and it still worked straight off the bat, amazing. Most systems seem to want windows reinstalling after a mobo swap. edit: just noticed it has a 'uli' chipset which ive never heard of...is this ALi's new name?
 
Just to answer my own earlier question: Over at NVnews.net there are at least 2 forum users claiming that they have a 7950 GX2 working 'flawlessly' with this board.
 
meaz said:
Most systems seem to want windows reinstalling after a mobo swap. edit: just noticed it has a 'uli' chipset which ive never heard of...is this ALi's new name?
Click to expand...

Yep ULi and ALi are one and the same. I'd avise advise at least a repair install of windows though. Might save you trouble in future.
 
question
is this mobo ok with lastest bios,will it run munskin pc3500 black memory at 4 x 512 sticks without a prob ,have all issues been resolved and how it with x2 4400 cpu as well
cheers
Keltic
 
Just a quicky, have had this board myself for a while now, no problems.

Some bits for my mates PC have just arrived, just built it, it spins up but just black screen, cant see the bios. my LCD just sits in power saving mode

Asrock 939 Duel mobo
AMD 64 3000 (venice )
Radeon 9700pro (agp)
1 gig of 3200 memory in the blue slots (2 x 512 )


Any ideas. it defo sounds liek its posting. just cant see jack.


never had these problem on my build

Oh, I have tried swapping the 9700pro for a really old 16meg agp card and still just black screen


Any ideas peeps ?
 
kidloco said:
Just a quicky, have had this board myself for a while now, no problems.

Some bits for my mates PC have just arrived, just built it, it spins up but just black screen, cant see the bios. my LCD just sits in power saving mode

Asrock 939 Duel mobo
AMD 64 3000 (venice )
Radeon 9700pro (agp)
1 gig of 3200 memory in the blue slots (2 x 512 )


Any ideas. it defo sounds liek its posting. just cant see jack.


never had these problem on my build

Oh, I have tried swapping the 9700pro for a really old 16meg agp card and still just black screen


Any ideas peeps ?
Click to expand...

Try clearing the CMOS and see if it boots properly.

HTH, dagwoood.
 
Currently running BIOS 180, about 3-10 times when I restart the computer the screen just stays black and the computer is unresponsive. Needs to be switched off at the wall. Is this the cold boot issue that was present in the early BIOS releases?
 
yes i get the same i was wondering what caused it ? anyway what is the best temp monitoring programme to use with these asrock boards ? :)
 
You must log in or register to reply here.
Back
Top Bottom